All MIBs › ME1200-PTP-MIB › me1200PtpNotifsPortStateChange
me1200PtpNotifsPortStateChange
Module: ME1200-PTP-MIB
OID (symbolic): ME1200-PTP-MIB::me1200PtpNotifsPortStateChange
OID (numeric): 1.3.6.1.4.1.9.9.815.1.65.1.6.1
Node type: NOTIFICATION-TYPE
Description: An me1200PtpNotifsPortStateChange notification is sent when the Port State changes occurs. Port State is an enumerated integer value. Description of various possible Port States is:
initializing - In this state a port initializes its data sets, hardware, and communication facilities.
faulty - The fault state of the protocol.
disabled - The port shall not place any messages on its communication path.
listening - The port is waiting for the announceReceiptTimeout to expire or to receive an Announce message from a master.
preMaster - The port shall behave in all respects as though it were in the MASTER state except that it shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, signaling, or management messages. master - The port is behaving as a master port.
passive - The port shall not place any messages on its communication path except for Pdelay_Req, Pdelay_Resp, Pdelay_Resp_Follow_Up, or signaling messages, or management messages that are a required response to another management message
uncalibrated - The local port is preparing to synchronize to the master port.
slave - The port is synchronizing to the selected master port.
p2pTransparent - The port is in point to point transparent state.
e2eTransparent - The port is in end to end transparent state.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' ME1200-PTP-MIB::me1200PtpNotifsPortStateChange snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.815.1.65.1.6.1
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:59785->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (327958921) 37 days, 22:59:49.21 SNMPv2-MIB::snmpTrapOID.0 = OID: ME1200-PTP-MIB::me1200PtpNotifsPortStateChange
Start monitoring Cisco ME1200 Carrier Ethernet Access Device (IEEE 1588 PTP clock) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-PTP-MIB::me1200PtpNotifsPortStateChange OID value, configure state conditions and alerts, and monitor any Cisco ME1200 Carrier Ethernet Access Device (IEEE 1588 PTP clock) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.65 | me1200PtpMib | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1 | me1200PtpMibObjects | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1.6 | me1200PtpNotifs | ME1200-PTP-MIB |
| 1.3.6.1.4.1.9.9.815.1.65.1.6.1 | me1200PtpNotifsPortStateChange | ME1200-PTP-MIB |