ME1200-FIRMWARE-MIB

All MIBs › ME1200-FIRMWARE-MIB

Organization: Cisco Systems, Inc

Last Updated: 2014-12-16

Category: Device Management, Vendor: Cisco

Description: Cisco ME1200 Metro Ethernet switch MIB for firmware image management including upload, activate, and version control objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-FIRMWARE-MIB?

This is a Cisco private MIB module for the ME1200 Metro Ethernet switch that manages firmware image inventory, upload, and activation. It exposes tables of firmware images present on the device (and per-switch in a stack), including image name, version, build date, code revision, and upload status. Its central monitoring use is tracking software version/status on the device: an operator can confirm which firmware image is active, verify the running code revision matches the intended release, and monitor the progress or success/failure of an in-progress firmware upload before rebooting the switch. As a proprietary Cisco module it has no direct dependency on a standard IETF MIB, though it parallels the role of entity/software MIBs on other platforms. It is used in Metro Ethernet deployments to manage firmware consistency and coordinate software upgrades across a fleet or stack of ME1200 switches. Engineers can download the ME1200-FIRMWARE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-FIRMWARE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME 1200 Ethernet Access Device

Monitoring Examples

An admin would poll me1200FirmwareStatusImageTable / me1200FirmwareStatusImageEntry to read ImageVersion, ImageBuiltDate, and ImageCodeRevision, confirming the switch is running the expected firmware release after a maintenance window. me1200FirmwareStatusImageUploadStatus would be monitored during a remote firmware push to detect a failed or stalled upload before activation. me1200FirmwareStatusSwitchTable indexed by me1200FirmwareStatusSwitchSwitchId lets an operator check firmware consistency across all members of a switch stack.

What Can Be Monitored

active firmware image version
firmware build date/code revision
firmware upload status
per-switch firmware status in a stack
image type/name

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200DisplayString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200FirmwareMIB	1.3.6.1.4.1.9.9.815.1.28			This is a private version of Firmware
me1200FirmwareMIBObjects	1.3.6.1.4.1.9.9.815.1.28.1
me1200FirmwareStatus	1.3.6.1.4.1.9.9.815.1.28.1.3
me1200FirmwareStatusImageTable	1.3.6.1.4.1.9.9.815.1.28.1.3.1		not-accessible	This is a table of status of images in flash.
me1200FirmwareStatusImageEntry	1.3.6.1.4.1.9.9.815.1.28.1.3.1.1		not-accessible	Each entry has a set of image status.
I32 me1200FirmwareStatusImageNumber	1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.1	Integer32	not-accessible	The number of image. The number starts from 0.
ME1 me1200FirmwareStatusImageType	1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.2	ME1200StatusImageType	read-only	Image type of the status. bootloader(0) is for boot loader. activeFirmware(1) is for active (primary) firmware. alternativeFirmware(2) is for alternative (backup) firmware.
STR me1200FirmwareStatusImageName	1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.3	ME1200DisplayString	read-only	Image name.
STR me1200FirmwareStatusImageVersion	1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.4	ME1200DisplayString	read-only	Image version.
STR me1200FirmwareStatusImageBuiltDate	1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.5	ME1200DisplayString	read-only	The built date when the image is built.
STR me1200FirmwareStatusImageCodeRevision	1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.6	ME1200DisplayString	read-only	The code revesion which the image is built.
me1200FirmwareStatusImageUpload	1.3.6.1.4.1.9.9.815.1.28.1.3.2
ME1 me1200FirmwareStatusImageUploadStatus	1.3.6.1.4.1.9.9.815.1.28.1.3.2.1	ME1200UploadStatus	read-only	The status indicates the status of current upload operation. It is updated automatically. Modifying this flag does not take any effect. none(0) means no upload operation. success(1) means upload operation is successful. inProgress(2) means current upload operation is in progress. errIvalidIp(3) means upload operation is failed due to invalid IP address. errTftpFailed(4) means upload operation is failed due to failed TFTP operation. errBusy(5) means upload operation is failed due to other upload in processing. errMemoryInsufficient(6) means upload operation is failed due to memory insufficient. errInvalidImage(7) means upload operation is failed due to invalid image. errWriteFlash(8) means upload operation is failed due to failed writing flash. errSameImageExisted(9) means upload operation is failed because the upload image is the same as the one in flash. errUnknownImage(10) means upload operation is failed because the type of upload image is unknown. errFlashImageNotFound(11) means upload operation is failed because the location in flash to upload the image is not found. errFlashEntryNotFound(12) means upload operation is failed because the corresponding entry in flash to upload the image is not found. errCrc(13) means upload operation is failed due to incorrect CRC in the upload image. errImageSize(14) means upload operation is failed due to invalid image size. errEraseFlash(15) means upload operation is failed due to failed erasing flash. errIncorrectImageVersion(16) means upload operation is failed due to incorrect version of the upload image. errDownloadUrl(17) means upload operation is failed due to fail to download image from URL. errInvalidUrl(18) means upload operation is failed due to invalid URL.
me1200FirmwareStatusSwitchTable	1.3.6.1.4.1.9.9.815.1.28.1.3.3		not-accessible	This is a table of status of images in switch.
me1200FirmwareStatusSwitchEntry	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1		not-accessible	Each entry has a set of image status.
I32 me1200FirmwareStatusSwitchSwitchId	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1.1	Integer32	not-accessible	The ID of switch.
STR me1200FirmwareStatusSwitchChipId	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1.2	ME1200DisplayString	read-only	ID of chip.
STR me1200FirmwareStatusSwitchBoardType	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1.3	ME1200DisplayString	read-only	Type of board.
U32 me1200FirmwareStatusSwitchPortCnt	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1.4	Unsigned32	read-only	Count of ports.
STR me1200FirmwareStatusSwitchProduct	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1.5	ME1200DisplayString	read-only	Product name.
STR me1200FirmwareStatusSwitchVersion	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1.6	ME1200DisplayString	read-only	Image version.
STR me1200FirmwareStatusSwitchBuiltDate	1.3.6.1.4.1.9.9.815.1.28.1.3.3.1.7	ME1200DisplayString	read-only	The built date when the image is built.
me1200FirmwareControl	1.3.6.1.4.1.9.9.815.1.28.1.4
me1200FirmwareControlGlobals	1.3.6.1.4.1.9.9.815.1.28.1.4.1
T/F me1200FirmwareControlGlobalsSwapFirmware	1.3.6.1.4.1.9.9.815.1.28.1.4.1.1	TruthValue	read-write	Swap firmware between active (primary) and alternative (backup). true(1) is to swap the firmware. false(2) is to do nothing.
me1200FirmwareControlImageUpload	1.3.6.1.4.1.9.9.815.1.28.1.4.2
T/F me1200FirmwareControlImageUploadDoUpload	1.3.6.1.4.1.9.9.815.1.28.1.4.2.1	TruthValue	read-write	Action to do upload image or not. true(1) is to do the upload operation. false(2) is to do nothing. The upload operation may need longer time to upload the image, so the SNMP timeout time needs to be modified accordingly.
ME1 me1200FirmwareControlImageUploadImageType	1.3.6.1.4.1.9.9.815.1.28.1.4.2.2	ME1200UploadImageType	read-write	Type of image to upload. bootloader(0) is to upload bootloader. firmware(1) is to upload application firmware.
STR me1200FirmwareControlImageUploadUrl	1.3.6.1.4.1.9.9.815.1.28.1.4.2.3	ME1200DisplayString	read-write	The location of image to upload. The format is [protocol]://[IP-address]/[file-path].
me1200FirmwareMIBConformance	1.3.6.1.4.1.9.9.815.1.28.2
me1200FirmwareMIBCompliances	1.3.6.1.4.1.9.9.815.1.28.2.1
me1200FirmwareMIBCompliance	1.3.6.1.4.1.9.9.815.1.28.2.1.1			The compliance statement for the implementation.
me1200FirmwareMIBGroups	1.3.6.1.4.1.9.9.815.1.28.2.2
me1200FirmwareStatusImageTableInfoGroup	1.3.6.1.4.1.9.9.815.1.28.2.2.1			A collection of objects suitable for bulk operations.
me1200FirmwareStatusImageUploadInfoGroup	1.3.6.1.4.1.9.9.815.1.28.2.2.2			A collection of objects suitable for bulk operations.
me1200FirmwareStatusSwitchTableInfoGroup	1.3.6.1.4.1.9.9.815.1.28.2.2.3			A collection of objects suitable for bulk operations.
me1200FirmwareControlGlobalsInfoGroup	1.3.6.1.4.1.9.9.815.1.28.2.2.4			A collection of objects suitable for bulk operations.
me1200FirmwareControlImageUploadInfoGroup	1.3.6.1.4.1.9.9.815.1.28.2.2.5			A collection of objects suitable for bulk operations.

RFC description

Manages Cisco ME1200 switch firmware operations including image status, upload/download, bootloader, and firmware versions.

Start monitoring Cisco ME 1200 Ethernet Access Device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-FIRMWARE-MIB

What Is ME1200-FIRMWARE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description