Hub-facs-prvt

All MIBs › Hub-facs-prvt

Category: Device Management, Technology: Switching/L2

Description: Private MIB for Ethernet hub facilities management providing proprietary configuration and status objects for hub hardware.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Hub-facs-prvt?

Hub-facs-prvt is a legacy proprietary MIB (enterprise OID 22) configuring trap-destination management-station tables (up to 10 entries) for router and port-level trap delivery, plus basic system control. Its router-trap-address table records address, community, version, type, state, flag, and age with learning/aging enables, a port-trap-address table mirrors similar fields, and system objects cover a reset action, self-test level, and IP address/netmask/default-gateway. As a configuration MIB it lets an administrator confirm trap-destination configuration and basic network addressing on this legacy hub. It is deployed on legacy hub equipment (enterprise OID 22). Engineers can download the Hub-facs-prvt file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Hub-facs-prvt. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy hub equipment (enterprise OID 22)

Monitoring Examples

An administrator checks rTrapAddrTbl to confirm the correct trap-destination management stations are configured on this legacy hub.

What Can Be Monitored

trap-destination configuration and basic network addressing

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
internet
mgmt

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
enterprises	1.3.6.1.4.1
fibronics	1.3.6.1.4.1.22
fm800	1.3.6.1.4.1.22.51
fmdebug	1.3.6.1.4.1.22.51.6
OCT fmDebugReadEeprom	1.3.6.1.4.1.22.51.6.2	OCTET STRING	read-only	Reads bytes from Eeprom
OCT fmDebugReadMem	1.3.6.1.4.1.22.51.6.1	OCTET STRING	read-only	Reads the bytes from the memory
fmdiag	1.3.6.1.4.1.22.51.5
INT fmDiagDebug	1.3.6.1.4.1.22.51.5.4	INTEGER	read-write	This object is for factory use only. Users must not write into this variable or improper operation can occur.
INT fmDiagDeleteFaults	1.3.6.1.4.1.22.51.5.5	INTEGER	read-write	setting this object to delete(2) causes the fault table in the e2 and it's ram image to be initialized, setting the object to no-delete(1) does not effect the fault table. when reading the object the value no-delete(1) will always be returned
NTF fmDiagDownloadTrap	1.3.6.1.4.1.22.51.0.31			This trap is send before starting downloading
fmDiagFaultEntry	1.3.6.1.4.1.22.51.5.3.1		not-accessible
INT fmDiagFaultIndex	1.3.6.1.4.1.22.51.5.3.1.1	INTEGER	read-only	The fault index in the fault table
STR fmDiagFaultReport	1.3.6.1.4.1.22.51.5.3.1.2	DisplayString	read-only	Get the faults detected by the agent
fmDiagFaultTable	1.3.6.1.4.1.22.51.5.3		not-accessible	Table of fault reports from the agent
NTF fmDiagGenericTrap	1.3.6.1.4.1.22.51.0.30			Generic Trap information
STR fmDiagTrapInfo	1.3.6.1.4.1.22.51.5.2	DisplayString	read-only	Used for generic traps. The first word is the trap code. The rest of the string is the extra information. Contains CR and LF char.
fmsystem	1.3.6.1.4.1.22.51.1
OCT fmSystemBootFile	1.3.6.1.4.1.22.51.1.1.11	OCTET STRING	read-only	Path and file name that is sent as a TFTP request
INT fmSystemDownLoad	1.3.6.1.4.1.22.51.1.1.13	INTEGER	read-write	Downloading the EDB. When reading the instance of this object the value has no meaning.
IP fmSystemFileServer	1.3.6.1.4.1.22.51.1.1.10	IpAddress	read-write	IP address to which a TFTP for boot is sent.
IP fmSystemIpAddr	1.3.6.1.4.1.22.51.1.1.7	IpAddress	read-only	IP address of the agent
IP fmSystemIPDefGway	1.3.6.1.4.1.22.51.1.1.9	IpAddress	read-only	Default Gateway Address
IP fmSystemIPNetMask	1.3.6.1.4.1.22.51.1.1.8	IpAddress	read-only	IP Network Mask
IP fmSystemLastDestinationIpAddr	1.3.6.1.4.1.22.51.1.1.21	IpAddress	read-only	The destination IP address in the the last IP message. It may be either fmSystemIpAddr or fmSystemSlipIpAddr
IP fmSystemLastSourceIpAddr	1.3.6.1.4.1.22.51.1.1.20	IpAddress	read-only	The source IP address, extracted from the last IP message
fmsystemperm	1.3.6.1.4.1.22.51.1.2
INT fmSystemReset	1.3.6.1.4.1.22.51.1.1.4	INTEGER	read-write	Resetting the CARD. When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest
fmsystemrun	1.3.6.1.4.1.22.51.1.1
INT fmSystemSelfTestLevel	1.3.6.1.4.1.22.51.1.1.5	INTEGER	read-write	Type of self test to be executed upon cold-reset
INT fmSystemSlipBaudRate	1.3.6.1.4.1.22.51.1.1.16	INTEGER	read-only	SLIP Baud rate This is object is available only when slip interface exist
IP fmSystemSlipIpAddr	1.3.6.1.4.1.22.51.1.1.14	IpAddress	read-only	SLIP IP address. This is object is available only when slip interface exist
IP fmSystemSlipIPNetMask	1.3.6.1.4.1.22.51.1.1.15	IpAddress	read-only	SLIP IP Network Mask This is object is available only when slip interface exist
INT fmSystemSlipParity	1.3.6.1.4.1.22.51.1.1.17	INTEGER	read-only	SLIP Parity This is object is available only when slip interface exist
INT fmSystemSlipStopBits	1.3.6.1.4.1.22.51.1.1.18	INTEGER	read-only	SLIP Stop Bits This is object is available only when slip interface exist
OCT pfmSystemBootFile	1.3.6.1.4.1.22.51.1.2.11	OCTET STRING	read-write	Path and file name that is sent as a TFTP request
IP pfmSystemFileServer	1.3.6.1.4.1.22.51.1.2.10	IpAddress	read-write	IP address to which a TFTP for boot is sent.
IP pfmSystemIpAddr	1.3.6.1.4.1.22.51.1.2.7	IpAddress	read-write	IP address of the agent
IP pfmSystemIPDefGway	1.3.6.1.4.1.22.51.1.2.9	IpAddress	read-write	Default Gateway Address
IP pfmSystemIPNetMask	1.3.6.1.4.1.22.51.1.2.8	IpAddress	read-write	IP Network Mask
OCT pfmSystemReadCommunity	1.3.6.1.4.1.22.51.1.2.13	OCTET STRING	read-write	Community string for reading When reading the instance of this object the value has no meaning.
INT pfmSystemSlipBaudRate	1.3.6.1.4.1.22.51.1.2.17	INTEGER	read-write	SLIP Baud rate This is object is available only when slip interface exist
IP pfmSystemSlipIpAddr	1.3.6.1.4.1.22.51.1.2.15	IpAddress	read-write	SLIP IP address This is object is available only when slip interface exist
IP pfmSystemSlipIPNetMask	1.3.6.1.4.1.22.51.1.2.16	IpAddress	read-write	SLIP IP Network Mask This is object is available only when slip interface exist
INT pfmSystemSlipParity	1.3.6.1.4.1.22.51.1.2.18	INTEGER	read-write	SLIP Parity This is object is available only when slip interface exist
INT pfmSystemSlipStopBits	1.3.6.1.4.1.22.51.1.2.19	INTEGER	read-write	SLIP Stop Bits This is object is available only when slip interface exist
OCT pfmSystemWriteCommunity	1.3.6.1.4.1.22.51.1.2.14	OCTET STRING	read-write	Community string for writing When reading the instance of this object the value has no meaning.
private	1.3.6.1.4
IP pTrapAddrAddr	1.3.6.1.4.1.22.3.2.1.1.1	IpAddress	read-write	IP address of entity requesting event notification
OCT pTrapAddrComm	1.3.6.1.4.1.22.3.2.1.1.2	OCTET STRING	read-write	Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
pTrapAddrEntry	1.3.6.1.4.1.22.3.2.1.1		read-write
INT pTrapAddrState	1.3.6.1.4.1.22.3.2.1.1.5	INTEGER	read-write	Determines status of this entry
pTrapAddrTbl	1.3.6.1.4.1.22.3.2.1		not-accessible	Table of managers to which traps must be sent. Up to 10 entries in table
OCT pTrapAddrType	1.3.6.1.4.1.22.3.2.1.1.4	OCTET STRING	read-write	Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - all Enterprise Traps other than fmDiagGenericTrap
INT pTrapAddrVer	1.3.6.1.4.1.22.3.2.1.1.3	INTEGER	read-write	Version number supported by destination node
INT pTrapAging	1.3.6.1.4.1.22.3.2.3	INTEGER	read-write	Time in sec. until we erase a trap entry
INT pTrapLearning	1.3.6.1.4.1.22.3.2.2	INTEGER	read-write	Learn the addresses of the managers automatically.
IP rTrapAddrAddr	1.3.6.1.4.1.22.3.1.1.1.1	IpAddress	read-write	IP address of entity requesting event notification
INT rTrapAddrAge	1.3.6.1.4.1.22.3.1.1.1.7	INTEGER	read-only	Aging time of the entry (in sec)
OCT rTrapAddrComm	1.3.6.1.4.1.22.3.1.1.1.2	OCTET STRING	read-write	Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
rTrapAddrEntry	1.3.6.1.4.1.22.3.1.1.1		read-only
INT rTrapAddrFlag	1.3.6.1.4.1.22.3.1.1.1.6	INTEGER	read-write	If the entry is fixed, it can not be deleted because of aging
INT rTrapAddrState	1.3.6.1.4.1.22.3.1.1.1.5	INTEGER	read-write	Determines status of this entry
rTrapAddrTbl	1.3.6.1.4.1.22.3.1.1		not-accessible	Table of managers to which traps must be sent. Up to 10 entries in table
OCT rTrapAddrType	1.3.6.1.4.1.22.3.1.1.1.4	OCTET STRING	read-write	Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - Enterprise Traps other than fmDiagGenericTrap
INT rTrapAddrVer	1.3.6.1.4.1.22.3.1.1.1.3	INTEGER	read-write	Version number supported by destination node
INT rTrapAging	1.3.6.1.4.1.22.3.1.3	INTEGER	read-only	Time in sec. until we erase a trap entry
INT rTrapLearning	1.3.6.1.4.1.22.3.1.2	INTEGER	read-only	Learn the addresses of the managers automatically.
trap	1.3.6.1.4.1.22.3
traperm	1.3.6.1.4.1.22.3.2
traprun	1.3.6.1.4.1.22.3.1
trapvar	1.3.6.1.4.1.22.3.3

RFC description

Private MIB for Fibronics NM129 SNMP agent trap table and hub management.

Start monitoring Legacy Fibronics hub equipment (trap-destination/system config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Hub-facs-prvt

What Is Hub-facs-prvt?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description