ANIC-MIB

All MIBs › ANIC-MIB

Category: Device Management

Description: ANI Networks branch MIB for network device configuration and status management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ANIC-MIB?

ANIC-MIB is a legacy proprietary MIB (enterprise OID 429, Analog Modem NIC in a NAS chassis) letting an administrator issue remote commands to individual analog-modem NIC cards. Its command table, keyed by index, records management-station ID, request ID, function, force flag, parameter, result, and code, while a configuration table records modem/DTE ring-no-answer trap enable, ring threshold, and line status. As a configuration/control MIB it lets an administrator trigger a remote action on a specific analog-modem NIC and confirm line status in a NAS chassis. It is deployed on legacy Network Access Server (NAS) chassis with analog modem NIC cards. Engineers can download the ANIC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ANIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

U.S. Robotics NETServer/Total Control Network Access Server chassis with analog modem NIC cards (legacy)

Monitoring Examples

An administrator uses anicCmdFunction to trigger a remote reset action on a specific analog-modem NIC and checks anicCfgLineStatus to confirm the result in a NAS chassis.

What Can Be Monitored

per-NIC remote command execution and line status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
TimeTicks
enterprises
experimental

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
usr	1.3.6.1.4.1.429
nas	1.3.6.1.4.1.429.1
anic	1.3.6.1.4.1.429.1.7
anicCmd	1.3.6.1.4.1.429.1.7.1
anicCmdTable	1.3.6.1.4.1.429.1.7.1.1		not-accessible	The NIC Command table contains an entry for each of the manageable Analog Modem NIC entity in the chassis. It provides a means through which to take specific actions on one or more NICs in the NAS chassis.
anicCmdEntry	1.3.6.1.4.1.429.1.7.1.1.1		not-accessible	There is one NIC Command entry per NIC entity in the chassis.
INT anicCmdIndex	1.3.6.1.4.1.429.1.7.1.1.1.1	INTEGER	read-only	A unique value for each manageable Analog Modem NIC entity in the chassis. The value of this object matches the value of the index of the corresponding manageable Analog Modem NIC entity in the entity table of the chassis MIB.
OCT anicCmdMgtStationId	1.3.6.1.4.1.429.1.7.1.1.1.2	OCTET STRING	read-write	This object is a generic read-write variable that a Management Station (MS) can use to guarantee that the results from a given command are the results of a command issued by that specific MS. Each MS must SET a unique value to this object when doing commands and GET the value of this object together with amnicCmdReqId and amnicCmdResult to detect interference from other MSs.
INT anicCmdReqId	1.3.6.1.4.1.429.1.7.1.1.1.3	INTEGER	read-only	This object contains the value of the request-id field in the SNMP PDU which invoked the current or most recent command or test on this NIC Card. If the request-id is unknown or undefined, this object contains the value zero.
INT anicCmdFunction	1.3.6.1.4.1.429.1.7.1.1.1.4	INTEGER	read-write	This object contains a value which describes the command which is being invoked.
INT anicCmdForce	1.3.6.1.4.1.429.1.7.1.1.1.5	INTEGER	read-write	In some cases, the NIC may be in a state such that certain commands could adversely affect connections. In such cases, a command request with this object not present or set to noForce will result in a warning. If the operator elects to ignore such warnings, this object can be set to force in a subsequent issue of the command to cause the command to be carried out regardless of its potentially hazzardous effects.
OCT anicCmdParam	1.3.6.1.4.1.429.1.7.1.1.1.6	OCTET STRING	read-write	This object contains parameters that are specific to the particular command being issued. In some cases, there will be no aditional parameters required.
INT anicCmdResult	1.3.6.1.4.1.429.1.7.1.1.1.7	INTEGER	read-only	This object contains the result of the most recently requested command or test, or the value none(1) if no commands have been requested since the last reset.
INT anicCmdCode	1.3.6.1.4.1.429.1.7.1.1.1.8	INTEGER	read-only	The value of this object upon test completion is dependent on the value of nicCmdFunction used to invoke the command. In the case of action commands, the value of this object is zero if the command was successful, and indicates a further description of what went wrong if it was unsuccessful. In the case of tests, the value here is a bit mapped result of each of the sub-tests performed.
anicCfg	1.3.6.1.4.1.429.1.7.2
anicCfgTable	1.3.6.1.4.1.429.1.7.2.1		not-accessible	The NIC Configuration table contains an entry for each entity in the NIC. It provides a means through which to configure an individual entity.
anicCfgEntry	1.3.6.1.4.1.429.1.7.2.1.1		not-accessible	There is one NIC configure entry per NIC entity in the chassis.
INT anicCfgIndex	1.3.6.1.4.1.429.1.7.2.1.1.1	INTEGER	read-only	A unique value for each entity in the Analog Modem NIC card.
INT anicCfgMdmRingNATrapEna	1.3.6.1.4.1.429.1.7.2.1.1.2	INTEGER	read-write	Enable or disable the modem ring no answer event.
INT anicCfgDteRingNATrapEna	1.3.6.1.4.1.429.1.7.2.1.1.3	INTEGER	read-write	Enable or Disable the DTE ring no answer event.
INT anicCfgRingThresh	1.3.6.1.4.1.429.1.7.2.1.1.4	INTEGER	read-write	Set up the number of ring threshold for the ring no answer events.
INT anicCfgLineStatus	1.3.6.1.4.1.429.1.7.2.1.1.5	INTEGER	read-only	This object is used to specify the line status.

RFC description

Manages analog modem NIC entities in access server chassis for remote access.

Start monitoring U.S. Robotics NETServer/Total Control NAS chassis (analog modem NIC cards) (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ANIC-MIB

What Is ANIC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description