ME1200-ICFG-MIB

All MIBs › ME1200-ICFG-MIB

Organization: Cisco Systems, Inc

Last Updated: 2014-02-18

Category: Device Management, Vendor: Cisco

Description: Cisco ME1200 Metro Ethernet switch MIB for integrated configuration file management including save, restore, and startup config objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-ICFG-MIB?

This is a Cisco ME1200 Metro Ethernet access switch MIB for integrated configuration-file management (ICFG), in the carrier/metro Ethernet access technology area. It exposes objects for saving, restoring, and managing startup and running configuration files stored on the device, including per-file statistics. It supports monitoring of device software/configuration status: me1200IcfgStatusFileTable reports each stored configuration file's name, size, and last-modified time, me1200IcfgStatusFileStatisticsNumberOfFiles/TotalBytes summarize configuration storage usage, and me1200IcfgStatusCopyConfigStatus reports the progress or result of a configuration-copy operation. It is modeled as a private version of the standard ICF (Integrated Configuration) MIB concept used across Cisco small-switch platforms. It is deployed on Cisco ME1200 metro Ethernet access switches at service-provider customer edge/demarcation points. Engineers can download the ME1200-ICFG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-ICFG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME1200 Metro Ethernet access switch

Monitoring Examples

An administrator would poll me1200IcfgStatusFileTable (indexed by me1200IcfgStatusFileFileNo) to check me1200IcfgStatusFileBytes and me1200IcfgStatusFileModifiedTime after pushing a new configuration, confirming the file was saved with the expected size and timestamp. me1200IcfgStatusCopyConfigStatus would be monitored during a config backup/restore to detect a failed or still-in-progress copy operation before rebooting the switch.

What Can Be Monitored

stored configuration file inventory
configuration file size and modified time
config storage usage (file count/total bytes)
configuration copy operation status

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From ME1200-TC

ME1200DisplayString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200IcfgMIB	1.3.6.1.4.1.9.9.815.1.101			This is a private version of ICFG
me1200IcfgMIBObjects	1.3.6.1.4.1.9.9.815.1.101.1
me1200IcfgStatus	1.3.6.1.4.1.9.9.815.1.101.1.3
me1200IcfgStatusFileStatistics	1.3.6.1.4.1.9.9.815.1.101.1.3.1
U32 me1200IcfgStatusFileStatisticsNumberOfFiles	1.3.6.1.4.1.9.9.815.1.101.1.3.1.1	Unsigned32	read-only	Number of files in flash.
U32 me1200IcfgStatusFileStatisticsTotalBytes	1.3.6.1.4.1.9.9.815.1.101.1.3.1.2	Unsigned32	read-only	Total number of bytes used by all files in flash.
me1200IcfgStatusFileTable	1.3.6.1.4.1.9.9.815.1.101.1.3.2		not-accessible	This is a table of status of files in flash.
me1200IcfgStatusFileEntry	1.3.6.1.4.1.9.9.815.1.101.1.3.2.1		not-accessible	Each entry has a set of file status.
I32 me1200IcfgStatusFileFileNo	1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.1	Integer32	not-accessible	The number of File. The number starts from 1.
STR me1200IcfgStatusFileFileName	1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.2	ME1200DisplayString	read-only	File name.
U32 me1200IcfgStatusFileBytes	1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.3	Unsigned32	read-only	Number of bytes of the file.
STR me1200IcfgStatusFileModifiedTime	1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.4	ME1200DisplayString	read-only	Last modified time of the file.
STR me1200IcfgStatusFileAttribute	1.3.6.1.4.1.9.9.815.1.101.1.3.2.1.5	ME1200DisplayString	read-only	File attribute in the linux format of drwxrwxrwx. 'd' is directory or not, the permission of rwx is for owner, group and other, respectively.
me1200IcfgStatusCopyConfig	1.3.6.1.4.1.9.9.815.1.101.1.3.3
ME1 me1200IcfgStatusCopyConfigStatus	1.3.6.1.4.1.9.9.815.1.101.1.3.3.1	ME1200ConfigStatus	read-only	The status indicates the status of current copy operation. none(0) means no copy operation. success(1) means copy operation is successful. inProgress(2) means current copy operation is in progress. errOtherInProcessing(3) means copy operation is failed due to other in processing. errNoSuchFile(4) means copy operation is failed due to file not existing. errSameSrcDst(5) means copy operation is failed due to the source and destination are the same. errPermissionDenied(6) means copy operation is failed due to the destination is not permitted to modify. errLoadSrc(7) means copy operation is failed due to the error to load source file. errSaveDst(8) means copy operation is failed due to the error to save or commit destination.
me1200IcfgControl	1.3.6.1.4.1.9.9.815.1.101.1.4
me1200IcfgControlGlobals	1.3.6.1.4.1.9.9.815.1.101.1.4.1
ME1 me1200IcfgControlGlobalsReloadDefault	1.3.6.1.4.1.9.9.815.1.101.1.4.1.1	ME1200ReloadDefault	read-write	Reset system to default. none(0) is to do nothing. default(1) is to reset the whole system to default. defaultKeepIp(2) is to reset system to default, but keep IP address of VLAN 1.
STR me1200IcfgControlGlobalsDeleteFile	1.3.6.1.4.1.9.9.815.1.101.1.4.1.2	ME1200DisplayString	read-write	Delete file in flash. The format is flash:filename. Where 'default-config' is read-only and not allowed to be deleted.
me1200IcfgControlCopyConfig	1.3.6.1.4.1.9.9.815.1.101.1.4.2
T/F me1200IcfgControlCopyConfigCopy	1.3.6.1.4.1.9.9.815.1.101.1.4.2.1	TruthValue	read-write	Action to do copy or not. true(1) is to do the copy operation. false(2) is to do nothing
ME1 me1200IcfgControlCopyConfigSourceConfigType	1.3.6.1.4.1.9.9.815.1.101.1.4.2.2	ME1200ConfigType	read-write	Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in SourceConfigFile.
STR me1200IcfgControlCopyConfigSourceConfigFile	1.3.6.1.4.1.9.9.815.1.101.1.4.2.3	ME1200DisplayString	read-write	Source configuration file. If the configuration file is in flash then the format is flash:'filename'. If the configuration file is from tftp then the format is tftp://server[:port]/path-to-file.
ME1 me1200IcfgControlCopyConfigDestinationConfigType	1.3.6.1.4.1.9.9.815.1.101.1.4.2.4	ME1200ConfigType	read-write	Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in DestinationConfigFile.
STR me1200IcfgControlCopyConfigDestinationConfigFile	1.3.6.1.4.1.9.9.815.1.101.1.4.2.5	ME1200DisplayString	read-write	Destination configuration file. If the configuration file is in flash then the format is flash:filename. If the configuration file is from tftp then the format is tftp://server[:port]/filename_with_path. Where 'default-config' is read-only and not allowed to be deleted.
T/F me1200IcfgControlCopyConfigMerge	1.3.6.1.4.1.9.9.815.1.101.1.4.2.6	TruthValue	read-write	This flag works only if DestinationConfigType is runningConfig(1). true(1) is to merge the source configuration into the current running configuration. false(2) is to replace the current running configuration with the source configuration.
me1200IcfgMIBConformance	1.3.6.1.4.1.9.9.815.1.101.2
me1200IcfgMIBCompliances	1.3.6.1.4.1.9.9.815.1.101.2.1
me1200IcfgMIBCompliance	1.3.6.1.4.1.9.9.815.1.101.2.1.1			The compliance statement for the implementation.
me1200IcfgMIBGroups	1.3.6.1.4.1.9.9.815.1.101.2.2
me1200IcfgStatusFileStatisticsInfoGroup	1.3.6.1.4.1.9.9.815.1.101.2.2.1			A collection of objects suitable for bulk operations.
me1200IcfgStatusFileTableInfoGroup	1.3.6.1.4.1.9.9.815.1.101.2.2.2			A collection of objects suitable for bulk operations.
me1200IcfgStatusCopyConfigInfoGroup	1.3.6.1.4.1.9.9.815.1.101.2.2.3			A collection of objects suitable for bulk operations.
me1200IcfgControlGlobalsInfoGroup	1.3.6.1.4.1.9.9.815.1.101.2.2.4			A collection of objects suitable for bulk operations.
me1200IcfgControlCopyConfigInfoGroup	1.3.6.1.4.1.9.9.815.1.101.2.2.5			A collection of objects suitable for bulk operations.

RFC description

Vendor management MIB for Microsens ME1200 industrial switch platform; manages integrated configuration and system parameters.

Start monitoring Cisco ME1200 Metro Ethernet access switch (configuration-file management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-ICFG-MIB

What Is ME1200-ICFG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description