All MIBs › ME1200-FIRMWARE-MIB › me1200FirmwareStatusImageType
me1200FirmwareStatusImageType
Module: ME1200-FIRMWARE-MIB
OID (symbolic): ME1200-FIRMWARE-MIB::me1200FirmwareStatusImageType
OID (numeric): 1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.2
Node type: OBJECT-TYPE
Type: ME1200StatusImageType
Access: read-only
Description: Image type of the status. bootloader(0) is for boot loader. activeFirmware(1) is for active (primary) firmware. alternativeFirmware(2) is for alternative (backup) firmware.
What is me1200FirmwareStatusImageType?
This read-only enumerated value identifies which type of firmware image an entry in the status table describes: bootloader(0), activeFirmware(1), the currently running primary image, or alternativeFirmware(2), the backup image. Admins use it to distinguish the boot loader entry from the two application firmware slots when reviewing image status. A value of activeFirmware(1) tells the admin this row describes the primary firmware image the switch is currently running.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.2 snmpwalk -v2c -c public <target> ME1200-FIRMWARE-MIB::me1200FirmwareStatusImageType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.2.1 snmpget -v2c -c public <target> ME1200-FIRMWARE-MIB::me1200FirmwareStatusImageType.1
Start monitoring Cisco ME 1200 Ethernet Access Device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ME1200-FIRMWARE-MIB::me1200FirmwareStatusImageType OID value, configure state conditions and alerts, and monitor any Cisco ME 1200 Ethernet Access Device from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.815 | ciscoME1200MIB | CISCOME1200-MIB |
| 1.3.6.1.4.1.9.9.815.1 | me1200SwitchMgmt | CISCOME1200-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.815.1.28 | me1200FirmwareMIB | ME1200-FIRMWARE-MIB |
| 1.3.6.1.4.1.9.9.815.1.28.1 | me1200FirmwareMIBObjects | ME1200-FIRMWARE-MIB |
| 1.3.6.1.4.1.9.9.815.1.28.1.3 | me1200FirmwareStatus | ME1200-FIRMWARE-MIB |
| 1.3.6.1.4.1.9.9.815.1.28.1.3.1 | me1200FirmwareStatusImageTable | ME1200-FIRMWARE-MIB |
| 1.3.6.1.4.1.9.9.815.1.28.1.3.1.1 | me1200FirmwareStatusImageEntry | ME1200-FIRMWARE-MIB |
| 1.3.6.1.4.1.9.9.815.1.28.1.3.1.1.2 | me1200FirmwareStatusImageType | ME1200-FIRMWARE-MIB |