HUAWEI-BULKSTAT-MIB

All MIBs › HUAWEI-BULKSTAT-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2013-07-01

Category: Device Management, Domain: Network Management, Vendor: Huawei

Description: Huawei bulk statistics collection MIB for configuring periodic data collection, file transfer, and statistics schema management on Huawei devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-BULKSTAT-MIB?

HUAWEI-BULKSTAT-MIB is a Huawei management-plane MIB that lets an operator configure scheduled bulk collection of SNMP performance data and manage the resulting output files for transfer off the device. Rather than exposing device metrics directly, it covers the categories of collection-job scheduling, statistics-schema definition, and generated-file/transfer management. Monitoring this MIB is mostly about software/process health of the collection framework itself: whether a scheduled bulk-stats job ran, whether it completed successfully, and whether the resulting file was produced and is ready for pickup, which is analogous to checking a batch job's status rather than a hardware sensor. It works alongside the counter-bearing MIBs it is configured to sample (such as IF-MIB or vendor performance MIBs) and often ties into file-transfer mechanisms like FTP/TFTP configured elsewhere on the device. It is used on Huawei routers and switches where an NMS wants to offload heavy periodic polling into device-side scheduled exports instead of live SNMP GETs. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-BULKSTAT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-BULKSTAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers
Huawei switches

Monitoring Examples

An administrator would create a bulk-statistics schema and schedule via this MIB's objects, then poll the job/file status objects to confirm a collection cycle completed and produced a bulk data file; if the status shows a failed job or no new file appears after the scheduled interval, that signals a collection or storage problem on the device.

What Can Be Monitored

bulk statistics job/schedule status
statistics schema configuration
generated bulk file status
file transfer success or failure

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwBulkStat	1.3.6.1.4.1.2011.5.25.140			The MIB module for creating and deleting bulk files of SNMP data for file transfer.
hwBulkStatMibObjects	1.3.6.1.4.1.2011.5.25.140.1
INT hwBulkStatEnable	1.3.6.1.4.1.2011.5.25.140.1.1	INTEGER	read-write	The value of this object identifies whether BulkStat is enabled.
I32 hwBulkStatCollectCapability	1.3.6.1.4.1.2011.5.25.140.1.2	Integer32	read-only	The value of this object identifies the collection capability in five minutes.
I32 hwBulkStatDefineMaxFiles	1.3.6.1.4.1.2011.5.25.140.1.3	Integer32	read-only	The value of this object identifies the maximum number of statistics files that can be created.
I32 hwBulkStatDefineFiles	1.3.6.1.4.1.2011.5.25.140.1.4	Integer32	read-only	The value of this object identifies the number of statistics files that are configured currently.
I32 hwBulkStatDefineObjects	1.3.6.1.4.1.2011.5.25.140.1.5	Integer32	read-only	The value of this object identifies the number of statistics objects configured in all files.
INT hwBulkStatTrapEnable	1.3.6.1.4.1.2011.5.25.140.1.6	INTEGER	read-write	The object specifies whether to send trap information to NMS. It's allowed to send trap information to NMS only when the value is enable. The default value is disable.
I32 hwBulkStatDefineFileTableNextIndex	1.3.6.1.4.1.2011.5.25.140.1.7	Integer32	read-only	The value of this object identifies the index of the next available hwBulkStatDefineObjectTable. If there is no available index, the value will be filled with 0.
hwBulkStatDefineFileTable	1.3.6.1.4.1.2011.5.25.140.1.8		not-accessible	Bulk file management table, providing create/modify/delete operations. To create a bulk file, you need create a related record in this table, and add object nodes in the hwBulkStatDefineObjectTable. If you delete a bulk file, the related objects in the hwBulkStatDefineObjectTable will be deleted.
hwBulkStatDefineFileEntry	1.3.6.1.4.1.2011.5.25.140.1.8.1		not-accessible	Entry of hwBulkStatDefineFileTable.
I32 hwBulkStatDefineFileIndex	1.3.6.1.4.1.2011.5.25.140.1.8.1.1	Integer32	not-accessible	The value of this object identifies the indexes of statistics files. The maximum index number is equal to that of the bulk files allowed to create.
OCT hwBulkStatDefineFileName	1.3.6.1.4.1.2011.5.25.140.1.8.1.11	OCTET STRING	read-create	The value of this object identifies the name of a statistics file.
INT hwBulkStatDefineFileStorage	1.3.6.1.4.1.2011.5.25.140.1.8.1.12	INTEGER	read-create	The value of this object identifies the storage mode of a statistics file.
INT hwBulkStatDefineFileFormat	1.3.6.1.4.1.2011.5.25.140.1.8.1.13	INTEGER	read-create	The value of this object identifies the format of a statistics file.
I32 hwBulkStatDefineFileCollectInterval	1.3.6.1.4.1.2011.5.25.140.1.8.1.14	Integer32	read-create	The value of this object identifies the interval for collecting statistics files.
I32 hwBulkStatDefineFileTransferInterval	1.3.6.1.4.1.2011.5.25.140.1.8.1.15	Integer32	read-create	The value of this object identifies the interval for uploading statistics files.
OCT hwBulkStatDefineFileTransferPrimaryURL	1.3.6.1.4.1.2011.5.25.140.1.8.1.16	OCTET STRING	read-create	This object indicates the primary URL the statistics file is uploaded to. It should be in the forms of below: ftp://user:password@host/folder/bulkstat1 sftp://user:password@host/folder/bulkstat1 tftp://10.1.0.1/tftpboot/user/bulkstat1
OCT hwBulkStatDefineFileTransferSecondaryURL	1.3.6.1.4.1.2011.5.25.140.1.8.1.17	OCTET STRING	read-create	This object indicates the secondary URL the statistics file is uploaded to. It should be in the forms of below: ftp://user:password@host/folder/bulkstat1 sftp://user:password@host/folder/bulkstat1 tftp://10.1.0.1/tftpboot/user/bulkstat1
I32 hwBulkStatDefineFileTransferRetryTimes	1.3.6.1.4.1.2011.5.25.140.1.8.1.18	Integer32	read-create	The value of this object identifies the retransmission times of the statistics file during uploading.
I32 hwBulkStatDefineFileRemainTime	1.3.6.1.4.1.2011.5.25.140.1.8.1.19	Integer32	read-create	The value of this object identifies the time for reserving statistics files.
INT hwBulkStatDefineFileStatus	1.3.6.1.4.1.2011.5.25.140.1.8.1.20	INTEGER	read-create	The value of this object identifies status of statistics files.There are three available values: stopped, ready, and running. For running state, it is read-only. For the other two, they are read-create, but can not be set to running, and set duplicatedly.
I32 hwBulkStatDefineFileLastTransferSuccessTime	1.3.6.1.4.1.2011.5.25.140.1.8.1.21	Integer32	read-only	The value of this object identifies the last file collection timestamp of the latest successful statistics file uploading. The value is in seconds.
I32 hwBulkStatDefineFileLastTransferFailTime	1.3.6.1.4.1.2011.5.25.140.1.8.1.22	Integer32	read-only	The value of this object identifies the last file collection timestamp of the latest failed statistics file uploading.
I32 hwBulkStatDefineFileNextObjectIndex	1.3.6.1.4.1.2011.5.25.140.1.8.1.23	Integer32	read-only	The value of this object identifies the index of the next available hwBulkStatDefineObjectTable.
ROW hwBulkStatDefineFileRowStatus	1.3.6.1.4.1.2011.5.25.140.1.8.1.51	RowStatus	read-create	This object indicates the row status of the statistics file table.
hwBulkStatDefineObjectTable	1.3.6.1.4.1.2011.5.25.140.1.9		not-accessible	Object management table in the bulk file, providing add/modify/delete operations. Prerequisite for the operation is that the bulk file is listed in the hwBulkStatDefineFileTable.
hwBulkStatDefineObjectEntry	1.3.6.1.4.1.2011.5.25.140.1.9.1		not-accessible	Entry of hwBulkStatDefineObjectTable.
I32 hwBulkStatDefineObjectIndex	1.3.6.1.4.1.2011.5.25.140.1.9.1.1	Integer32	not-accessible	The value of this object identifies statistics objects.
INT hwBulkStatDefineObjectClass	1.3.6.1.4.1.2011.5.25.140.1.9.1.11	INTEGER	read-create	The value of this object identifies the types of statistics objects.
OCT hwBulkStatDefineObjectOID	1.3.6.1.4.1.2011.5.25.140.1.9.1.12	OCTET STRING	read-create	This object indicates the OID of the statistics object.
OCT hwBulkStatDefineObjectIndexBegin	1.3.6.1.4.1.2011.5.25.140.1.9.1.13	OCTET STRING	read-create	This object indicates the start index of the statistics object.
I32 hwBulkStatDefineObjectInstanceNum	1.3.6.1.4.1.2011.5.25.140.1.9.1.14	Integer32	read-create	The value of this object identifies the number of instances of statistics objects.
ROW hwBulkStatDefineObjectRowStatus	1.3.6.1.4.1.2011.5.25.140.1.9.1.51	RowStatus	read-create	This object indicates the row status of the statistics object.
hwBulkStatNotifications	1.3.6.1.4.1.2011.5.25.140.2
NTF hwBulkStatCollectIncomplete	1.3.6.1.4.1.2011.5.25.140.2.1			An alarm is generated when the collected statistics files are incomplete.
NTF hwBulkStatCollectResume	1.3.6.1.4.1.2011.5.25.140.2.2			An alarm is generated when the incomplete statistics files are resumed.
NTF hwBulkStatURLConnectionFail	1.3.6.1.4.1.2011.5.25.140.2.3			An alarm is generated when the link for file uploading fails.
NTF hwBulkStatURLConnectionResume	1.3.6.1.4.1.2011.5.25.140.2.4			An alarm is generated when the link for file uploading recovers from the fault.
NTF hwBulkStatTransferFileDiscard	1.3.6.1.4.1.2011.5.25.140.2.5			An alarm is generated when the file fails to be uploaded and then is discarded.
hwBulkStatConformance	1.3.6.1.4.1.2011.5.25.140.3
hwBulkStatCompliances	1.3.6.1.4.1.2011.5.25.140.3.1
hwBulkStatCompliance	1.3.6.1.4.1.2011.5.25.140.3.1.1			The compliance statement for systems supporting the HUAWEI-BULKSTAT-MIB.
hwBulkStatGroups	1.3.6.1.4.1.2011.5.25.140.3.2
hwBulkStatObjectGroup	1.3.6.1.4.1.2011.5.25.140.3.2.1			The bulkstat attribute group.
hwBulkStatsDefineFileGroup	1.3.6.1.4.1.2011.5.25.140.3.2.2			The bulk file's group.
hwBulkStatDefineObjectGroup	1.3.6.1.4.1.2011.5.25.140.3.2.3			The bulkstat object's group.
hwBulkStatNotificationGroup	1.3.6.1.4.1.2011.5.25.140.3.2.4			The notification group.

RFC description

Bulk statistics collection and file transfer for SNMP data export on Huawei network devices.

Start monitoring Huawei router or switch (scheduled bulk SNMP data collection) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-BULKSTAT-MIB

What Is HUAWEI-BULKSTAT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description