All MIBs › LUM-IFPERF-MIB
Organization: Infinera Corporation
Last Updated: 2019-06-28
Category: Optical Networking
Description: Tracks interface performance statistics and thresholds on Infinera network elements.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is LUM-IFPERF-MIB?
This is an Infinera network element MIB for interface performance management, part of the optical transport/DWDM networking technology area. It defines performance-monitoring tables covering interface administration, forward error correction (FEC), and G.826-based transmission error-performance statistics. Its monitoring focus is on performance and configuration status rather than physical sensors: table-size and last-config/last-state-change timestamp objects for each performance group let an operator determine when FEC or G.826 statistics were last reset, reconfigured, or changed state, which is a key indicator of link/optical quality events. It is built around the ITU-T G.826 error-performance standard and general interface-performance concepts similar to those in IETF interface MIBs. It is deployed on Infinera optical transport network elements in service-provider and enterprise optical backbone networks. Engineers can download the LUM-IFPERF-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in LUM-IFPERF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Infinera optical/DWDM network element
- transport network equipment
Monitoring Examples
An operator would monitor ifPerfGeneralFecTableSize and ifPerfGeneralFecStateLastChangeTime to detect when FEC performance counters were reset or a new period started, which often follows a change in optical signal quality, and check ifPerfGeneralG826TableSize together with ifPerfGeneralG826ConfigLastChangeTime to confirm G.826 error-performance bins are configured as expected on a given circuit. ifPerfGeneralAdminConfigLastChangeTime would be checked when troubleshooting an unexpected gap in collected statistics, since it flags a recent change to administrative performance-monitoring configuration.
What Can Be Monitored
- FEC (forward error correction) performance stats
- G.826 error performance stats
- interface admin performance configuration
- performance table sizes
- last config/state change timestamps
This MIB depends on
Related MIBs
Imported Objects
From LUM-REG
| lumIfPerfMIB | OBJECT-IDENTITY |
| lumModules | OBJECT-IDENTITY |
From LUM-TC
| AdminStatusWithNA | |
| CommandString | |
| FaultStatusWithNA | |
| MgmtNameString | |
| OnOff | |
| OperStatusWithNA | |
| ResetWithNA | |
| Signed32WithNA | |
| TribPortIdType | |
| Unsigned32WithNA |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using ifPerfL2StatCurrentFrames OID:
Select an Infinera optical/DWDM network element (interface performance/FEC/G.826) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ifPerfL2StatCurrentFrames into the Find box to locate it in the OID tree, then select it and click OK. The amount of Ethernet frames during a particular interval. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| lumIfPerfMIBModule | 1.3.6.1.4.1.8708.1.1.56 | The MIB module for management of performance objects. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The ifPerfAdmin performance group contains information and configuration for all Admin performance objects (3) The ifPerfFec performance group contains information and configuration for all Fec performance objects. (4) The ifPerfG826 performance group contains information and configuration for all G826 performance objects. Notice table is uni-directional meaning one entry for each direction. (5) The ifPerfL1 performance group contains information and configuration for all L1 performance objects. Notice table is uni-directional meaning one entry for each direction. (6) The ifPerfL0 performance group contains information and configuration for all L0 performance objects. (7) The ifPerfL2 performance group contains information and configuration for all L2 performance objects. | ||
| lumIfPerfConfs | 1.3.6.1.4.1.8708.2.56.1 | |||
| lumIfPerfGroups | 1.3.6.1.4.1.8708.2.56.1.1 | |||
| ifPerfGeneralGroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.1 | The general objects. | ||
| ifPerfAdminGroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.2 | The ifPerfAdmin objects. | ||
| ifPerfFecGroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.3 | The ifPerfFec objects. | ||
| ifPerfG826GroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.4 | The ifPerfG826 objects. | ||
| ifPerfL1GroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.5 | The ifPerfL1 objects. | ||
| ifPerfL0GroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.6 | The ifPerfL0 objects. | ||
| ifPerfGeneralGroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.7 | The general objects. | ||
| ifPerfL2StatGroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.8 | The ifPerfL2Stat objects. | ||
| ifPerfL1GroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.9 | The ifPerfL2 objects. | ||
| ifPerfL0GroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.10 | The ifPerfL0 objects. | ||
| ifPerfL2ErrorGroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.11 | The ifPerfL2Error objects. | ||
| ifPerfFecGroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.12 | The ifPerfFec objects. | ||
| ifPerfFecGroupV3 | 1.3.6.1.4.1.8708.2.56.1.1.13 | The ifPerfFec objects. | ||
| ifPerfAdminGroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.14 | The ifPerfAdmin objects. (R26) | ||
| ifPerfG826GroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.15 | The ifPerfG826 objects. | ||
| ifPerfL2StatGroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.16 | The ifPerfL2Stat objects. | ||
| ifPerfFecGroupV4 | 1.3.6.1.4.1.8708.2.56.1.1.17 | The ifPerfFec objects. | ||
| ifPerfL0GroupV3 | 1.3.6.1.4.1.8708.2.56.1.1.18 | The ifPerfL0 objects. | ||
| ifPerfFecGroupV5 | 1.3.6.1.4.1.8708.2.56.1.1.19 | The ifPerfFec objects. | ||
| ifPerfGeneralGroupV3 | 1.3.6.1.4.1.8708.2.56.1.1.20 | The general objects. | ||
| ifPerfDelayGroupV1 | 1.3.6.1.4.1.8708.2.56.1.1.21 | The Delay objects. | ||
| ifPerfDelayGroupV2 | 1.3.6.1.4.1.8708.2.56.1.1.22 | The Delay objects. | ||
| ifPerfFecGroupV6 | 1.3.6.1.4.1.8708.2.56.1.1.23 | The ifPerfFec objects. | ||
| ifPerfL0GroupV4 | 1.3.6.1.4.1.8708.2.56.1.1.24 | The ifPerfL0 objects. | ||
| ifPerfG826GroupV3 | 1.3.6.1.4.1.8708.2.56.1.1.25 | The ifPerfG826 objects. | ||
| lumIfPerfCompl | 1.3.6.1.4.1.8708.2.56.1.2 | |||
| lumIfPerfComplV1 | 1.3.6.1.4.1.8708.2.56.1.2.1 | Basic implementation requirements for the ifPerf MIB. | ||
| lumIfPerfComplV2 | 1.3.6.1.4.1.8708.2.56.1.2.2 | Basic implementation requirements for the ifPerf MIB. | ||
| lumIfPerfComplV3 | 1.3.6.1.4.1.8708.2.56.1.2.3 | Basic implementation requirements for the ifPerf MIB. | ||
| lumIfPerfComplV4 | 1.3.6.1.4.1.8708.2.56.1.2.4 | Basic implementation requirements for the ifPerf MIB. | ||
| lumIfPerfComplV5 | 1.3.6.1.4.1.8708.2.56.1.2.5 | Basic implementation requirements for the ifPerf MIB. | ||
| lumIfPerfComplV6 | 1.3.6.1.4.1.8708.2.56.1.2.6 | Basic implementation requirements for the ifPerf MIB. | ||
| lumIfPerfComplV7 | 1.3.6.1.4.1.8708.2.56.1.2.7 | Basic implementation requirements for the ifPerf MIB. | ||
| lumIfPerfComplV8 | 1.3.6.1.4.1.8708.2.56.1.2.8 | Basic implementation requirements for the ifPerf MIB. (R26) | ||
| lumIfPerfComplV9 | 1.3.6.1.4.1.8708.2.56.1.2.9 | Basic implementation requirements for the ifPerf MIB. (R26) | ||
| lumIfPerfComplV10 | 1.3.6.1.4.1.8708.2.56.1.2.10 | Basic implementation requirements for the ifPerf MIB. (R26) | ||
| lumIfPerfComplV11 | 1.3.6.1.4.1.8708.2.56.1.2.11 | Basic implementation requirements for the ifPerf MIB. (R27.1) | ||
| lumIfPerfComplV12 | 1.3.6.1.4.1.8708.2.56.1.2.12 | Basic implementation requirements for the ifPerf MIB. (R29) | ||
| lumIfPerfComplV13 | 1.3.6.1.4.1.8708.2.56.1.2.13 | Basic implementation requirements for the ifPerf MIB. (R32.1) | ||
| lumIfPerfMIBObjects | 1.3.6.1.4.1.8708.2.56.2 | |||
| ifPerfGeneral | 1.3.6.1.4.1.8708.2.56.2.1 | |||
| DAT ifPerfGeneralConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.1 | DateAndTime | read-only | The time when the configuration of the MIB was last changed. |
| DAT ifPerfGeneralStateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.2 | DateAndTime | read-only | The time when the state and/or configuration of the MIB was last changed. |
| U32 ifPerfGeneralAdminTableSize | 1.3.6.1.4.1.8708.2.56.2.1.3 | Unsigned32 | read-only | Size of ifPerfAdmin performance table. |
| DAT ifPerfGeneralAdminConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.4 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralAdminStateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.5 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| U32 ifPerfGeneralFecTableSize | 1.3.6.1.4.1.8708.2.56.2.1.6 | Unsigned32 | read-only | Size of ifPerfFec performance table. |
| DAT ifPerfGeneralFecConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.7 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralFecStateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.8 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| U32 ifPerfGeneralG826TableSize | 1.3.6.1.4.1.8708.2.56.2.1.9 | Unsigned32 | read-only | Size of ifPerfG826 performance table. |
| DAT ifPerfGeneralG826ConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.10 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralG826StateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.11 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| U32 ifPerfGeneralL1TableSize | 1.3.6.1.4.1.8708.2.56.2.1.12 | Unsigned32 | read-only | Size of ifPerfL1 performance table. |
| DAT ifPerfGeneralL1ConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.13 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralL1StateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.14 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| U32 ifPerfGeneralL0TableSize | 1.3.6.1.4.1.8708.2.56.2.1.15 | Unsigned32 | read-only | Size of ifPerfL0 performance table. |
| DAT ifPerfGeneralL0ConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.16 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralL0StateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.17 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| U32 ifPerfGeneralL2StatTableSize | 1.3.6.1.4.1.8708.2.56.2.1.18 | Unsigned32 | read-only | Size of ifPerfL0 performance table. |
| DAT ifPerfGeneralL2StatConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.19 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralL2StatStateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.20 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| U32 ifPerfGeneralL2ErrorTableSize | 1.3.6.1.4.1.8708.2.56.2.1.21 | Unsigned32 | read-only | Size of ifPerfL0 performance table. |
| DAT ifPerfGeneralL2ErrorConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.22 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralL2ErrorStateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.23 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| U32 ifPerfGeneralDelayTableSize | 1.3.6.1.4.1.8708.2.56.2.1.24 | Unsigned32 | read-only | Size of ifPerfDelay performance table. |
| DAT ifPerfGeneralDelayConfigLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.25 | DateAndTime | read-only | The time when the configuration of the table was last changed. |
| DAT ifPerfGeneralDelayStateLastChangeTime | 1.3.6.1.4.1.8708.2.56.2.1.26 | DateAndTime | read-only | The time when the state and/or configuration of the table was last changed. |
| ifPerfAdminList | 1.3.6.1.4.1.8708.2.56.2.2 | |||
| ifPerfAdminTable | 1.3.6.1.4.1.8708.2.56.2.2.1 | not-accessible | The ifPerfAdmin performance group contains information and configuration for all ifPerfAdmin performance objects. | |
| ifPerfAdminEntry | 1.3.6.1.4.1.8708.2.56.2.2.1.1 | not-accessible | An entry in the ifPerfAdmin list. | |
| U32 ifPerfAdminIndex | 1.3.6.1.4.1.8708.2.56.2.2.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| STR ifPerfAdminName | 1.3.6.1.4.1.8708.2.56.2.2.1.1.2 | MgmtNameString | read-create | The management name of the performance object, for example 'lineAdmin:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfAdminConnIfBasicIfIndex | 1.3.6.1.4.1.8708.2.56.2.2.1.1.3 | Unsigned32WithNA | read-create | An index that describes to which index in ifBasicIf table this object is related. |
| ADM ifPerfAdminAdminStatus | 1.3.6.1.4.1.8708.2.56.2.2.1.1.4 | AdminStatusWithNA | read-write | The administrative state of the ifPerf interface. down - The interface is de-activated. service - The interface is activated. up - The interface will be activated when available. |
| ONO ifPerfAdminReportMode | 1.3.6.1.4.1.8708.2.56.2.2.1.1.5 | OnOff | read-only | The performance reporting mode on the interface. off - performance reporting is inactive. on - performance reporting is activated. |
| OPE ifPerfAdminOperStatus | 1.3.6.1.4.1.8708.2.56.2.2.1.1.6 | OperStatusWithNA | read-only | The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing its transition to the 'up' state. up - The interface is active. |
| BOO ifPerfAdminIsSuspect15m | 1.3.6.1.4.1.8708.2.56.2.2.1.1.7 | BooleanValueWithNA | read-only | This variable indicates if the performance data is unreliable for the 15 minute interval. The 'isSuspect' value is set to true if the interface has been reconfigured or reset during the maintenance operation. For example if - a full interval has not passed since last reset - the board has been restarted during the interval - adminStatus has been set to down - the system time has been set in the node during the interval. |
| BOO ifPerfAdminIsSuspect24h | 1.3.6.1.4.1.8708.2.56.2.2.1.1.8 | BooleanValueWithNA | read-only | This variable indicates if the performance data is unreliable for the 24 hour interval. The 'isSuspect' value is set to true if the interface has been reconfigured or reset during the maintenance operation. For example if - a full interval has not passed since last reset - the board has been restarted during the interval - adminStatus has been set to down - the system time has been set in the node during the interval. |
| RES ifPerfAdminReset15m | 1.3.6.1.4.1.8708.2.56.2.2.1.1.9 | ResetWithNA | read-only | Reset all performance counters for the 15 minute interval. After a successful reset the default value (normal) is restored in this attribute. |
| RES ifPerfAdminReset24h | 1.3.6.1.4.1.8708.2.56.2.2.1.1.10 | ResetWithNA | read-only | Reset performance counters for the 24 hour interval. After a successful reset the default value (normal) is restored in this attribute. notApplicable (2147483647) is used when attribute is not used in current configuration. |
| U32 ifPerfAdminUpId | 1.3.6.1.4.1.8708.2.56.2.2.1.1.11 | Unsigned32 | read-only | Identity in the UP for the Perf Admin entry |
| ifPerfFecList | 1.3.6.1.4.1.8708.2.56.2.3 | |||
| ifPerfFecTable | 1.3.6.1.4.1.8708.2.56.2.3.1 | not-accessible | The ifPerfFec performance group contains information and configuration for all ifPerfFec performance objects. | |
| ifPerfFecEntry | 1.3.6.1.4.1.8708.2.56.2.3.1.1 | not-accessible | An entry in the ifPerfFec list. | |
| U32 ifPerfFecIndex | 1.3.6.1.4.1.8708.2.56.2.3.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| STR ifPerfFecName | 1.3.6.1.4.1.8708.2.56.2.3.1.1.2 | MgmtNameString | read-create | The management name of the performance object, for example 'lineFec:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfFecConnIfPerfAdminIfIndex | 1.3.6.1.4.1.8708.2.56.2.3.1.1.3 | Unsigned32WithNA | read-create | An index that describes to which index in ifPerfAdminIf table this object is related. |
| UNS ifPerfFecCorrectedZeros | 1.3.6.1.4.1.8708.2.56.2.3.1.1.4 | Unsigned32WithNA | read-only | FEC counter. Number of corrected zeros. |
| UNS ifPerfFecCorrectedOnes | 1.3.6.1.4.1.8708.2.56.2.3.1.1.5 | Unsigned32WithNA | read-only | FEC counter. Number of corrected ones. |
| UNS ifPerfFecRxBerEstimation | 1.3.6.1.4.1.8708.2.56.2.3.1.1.6 | Unsigned32WithNA | read-only | Rx Bit Error Rate estimation. |
| UNS ifPerfFecRxAvgPreFecBer | 1.3.6.1.4.1.8708.2.56.2.3.1.1.7 | Unsigned32WithNA | read-only | Rx Average Pre FEC Bit Error Rate of PM interval. |
| UNS ifPerfFecCorrectedBits | 1.3.6.1.4.1.8708.2.56.2.3.1.1.8 | Unsigned32WithNA | read-only | FEC counter. Number of corrected bits. |
| STR ifPerfFecRxBitErrorEstimation | 1.3.6.1.4.1.8708.2.56.2.3.1.1.9 | DisplayString | read-only | Rx Bit Error Rate estimation. |
| UNS ifPerfFecOpticalSNR | 1.3.6.1.4.1.8708.2.56.2.3.1.1.10 | Unsigned32WithNA | read-only | Optical signal-to-noise ratio margin (dB/0.1nm) with respect to FEC cliff, based on calculation from rate of corrected bits. |
| U32 ifPerfFecUpId | 1.3.6.1.4.1.8708.2.56.2.3.1.1.11 | Unsigned32 | read-only | Identity in the UP for the Perf Admin entry |
| UNS ifPerfFecQMargin | 1.3.6.1.4.1.8708.2.56.2.3.1.1.12 | Unsigned32WithNA | read-only | Q factor margin (dB) with respect to the FEC threshold. |
| STR ifPerfFecPreFecBer | 1.3.6.1.4.1.8708.2.56.2.3.1.1.13 | DisplayString | read-only | Pre-FEC BER. |
| ifPerfG826List | 1.3.6.1.4.1.8708.2.56.2.4 | |||
| ifPerfG826Table | 1.3.6.1.4.1.8708.2.56.2.4.1 | not-accessible | The ifPerfG826 performance group contains information and configuration for all ifPerfG826 performance objects. Notice table is uni-directional meaning one entry for each direction. | |
| ifPerfG826Entry | 1.3.6.1.4.1.8708.2.56.2.4.1.1 | not-accessible | An entry in the ifPerfG826 list. | |
| U32 ifPerfG826Index | 1.3.6.1.4.1.8708.2.56.2.4.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| STR ifPerfG826Name | 1.3.6.1.4.1.8708.2.56.2.4.1.1.2 | MgmtNameString | read-create | The management name of the performance object, for example 'lineG826OtsOtu2SmUni15m:1:2:23-24', where the textual part indicates the hierarchy and type line/client G826 OTS/OTUk/ODUk/OPUk/RS/MS/MAC/PCS etc or any combination thereof SM/PM/TCMn monitor channel type, no monitor type is also possible Rx/Tx/Uni/Bi direction type 15m/24h time period, 15 minutes or 24 hours For the part after the colon the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfG826ConnIfPerfAdminIfIndex | 1.3.6.1.4.1.8708.2.56.2.4.1.1.3 | Unsigned32WithNA | read-create | An index that describes to which index in ifPerfAdminIf table this object is related. |
| PER ifPerfG826Period | 1.3.6.1.4.1.8708.2.56.2.4.1.1.4 | PerfPeriodWithNA | read-create | Period, 15 minute or 24 hour. - 15 minute interval measurements per measurement point - 24 hour interval measurements per measurement point |
| G82 ifPerfG826Type | 1.3.6.1.4.1.8708.2.56.2.4.1.1.5 | G826MeasurementTypeWithNA | read-create | The direction type of signal the interface expects. rx - Only ingoing signal. tx - Only outgoing signal. uniDi - Unidirectional signal. biDi - Ingoing and outgoing signal on the same port. |
| G82 ifPerfG826MonitorLevel | 1.3.6.1.4.1.8708.2.56.2.4.1.1.6 | G826MonitorLevelWithNA | read-create | Monitor level, e.g. OPUk, ODUk, OTUk, RS, MS, MAC, PCS. |
| G82 ifPerfG826MonitorChannel | 1.3.6.1.4.1.8708.2.56.2.4.1.1.7 | G826MonitorChannelWithNA | read-create | Monitor channel, e.g. SM, PM, TCM1-6. |
| UNS ifPerfG826CounterEs | 1.3.6.1.4.1.8708.2.56.2.4.1.1.8 | Unsigned32WithNA | read-only | Errored Seconds. The counter associated with the number of errored seconds in the interval specified by the period attribute. |
| UNS ifPerfG826CounterSes | 1.3.6.1.4.1.8708.2.56.2.4.1.1.9 | Unsigned32WithNA | read-only | Severely Errored Seconds. The counter associated with the number of severely errored seconds in the interval specified by the period attribute. |
| UNS ifPerfG826CounterUas | 1.3.6.1.4.1.8708.2.56.2.4.1.1.10 | Unsigned32WithNA | read-only | Unavailable Seconds. The counter associated with the number of unavailable seconds in the interval specified by the period attribute. |
| C64 ifPerfG826CounterBbe | 1.3.6.1.4.1.8708.2.56.2.4.1.1.11 | Counter64 | read-only | Background Block Errors. The counter associated with the number of background block errors in the interval specified by the period attribute. |
| UNS ifPerfG826ThresholdEs | 1.3.6.1.4.1.8708.2.56.2.4.1.1.12 | Unsigned32WithNA | read-write | Sets the threshold in seconds for the errored seconds alarm. Range 15m: 0 to 900 seconds 24h: 0 to 86400 seconds |
| UNS ifPerfG826ThresholdSes | 1.3.6.1.4.1.8708.2.56.2.4.1.1.13 | Unsigned32WithNA | read-write | Sets the threshold in seconds for the severely errored seconds alarm. Range 15m: 0 to 900 seconds 24h: 0 to 86400 seconds |
| UNS ifPerfG826ThresholdUas | 1.3.6.1.4.1.8708.2.56.2.4.1.1.14 | Unsigned32WithNA | read-write | Sets the threshold in seconds for the unavailable seconds alarm. Range 15m: 0 to 900 seconds 24h: 0 to 86400 seconds |
| C64 ifPerfG826ThresholdBbe | 1.3.6.1.4.1.8708.2.56.2.4.1.1.15 | Counter64 | read-write | Sets the threshold for the background block errors alarms. |
| FAU ifPerfG826FaultStatusEs | 1.3.6.1.4.1.8708.2.56.2.4.1.1.16 | FaultStatusWithNA | read-only | Errored Seconds threshold exceeded. alarm: The number of errors during a period exceeds the associated threshold. ok: The number of errored seconds during a period is below the threshold. |
| FAU ifPerfG826FaultStatusSes | 1.3.6.1.4.1.8708.2.56.2.4.1.1.17 | FaultStatusWithNA | read-only | Severely Errored Seconds threshold exceeded. alarm: The number of severely errored seconds during a period exceeds the associated threshold. ok: The number of severely errored seconds during a period is below the threshold. |
| FAU ifPerfG826FaultStatusUas | 1.3.6.1.4.1.8708.2.56.2.4.1.1.18 | FaultStatusWithNA | read-only | Unavailable Seconds threshold exceeded. alarm: The number of unavailable seconds during a period exceeds the associated threshold. ok: The number of unavailable seconds during a period is below the threshold. |
| FAU ifPerfG826FaultStatusBbe | 1.3.6.1.4.1.8708.2.56.2.4.1.1.19 | FaultStatusWithNA | read-only | Background Block Errors threshold exceeded. alarm: The number of background block errors during a period exceeds the associated threshold. ok: The number of background block errors during a period is below the threshold. |
| U32 ifPerfG826UpId | 1.3.6.1.4.1.8708.2.56.2.4.1.1.20 | Unsigned32 | read-only | Identity in the UP for the Perf Admin entry |
| TRI ifPerfG826TribPortId | 1.3.6.1.4.1.8708.2.56.2.4.1.1.21 | TribPortIdType | read-only | Tributary port id that describes to which high-order tributary port this object belong to. |
| ifPerfL1List | 1.3.6.1.4.1.8708.2.56.2.5 | |||
| ifPerfL1Table | 1.3.6.1.4.1.8708.2.56.2.5.1 | not-accessible | The ifPerfL1 performance group contains information and configuration for all ifPerfL1 performance objects. Notice table is uni-directional meaning one entry for each direction. | |
| ifPerfL1Entry | 1.3.6.1.4.1.8708.2.56.2.5.1.1 | not-accessible | An entry in the ifPerfL1 list. | |
| U32 ifPerfL1Index | 1.3.6.1.4.1.8708.2.56.2.5.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| STR ifPerfL1Name | 1.3.6.1.4.1.8708.2.56.2.5.1.1.2 | MgmtNameString | read-only | The management name of the performance object, for example 'clientL1Rx15m:1:2:1-2', where the textual part indicates the type line/client L1 Rx/Tx/Uni/Bi direction type 15m/24h time period, 15 minutes or 24 hours For the part after the colon the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfL1ConnIfPerfAdminIfIndex | 1.3.6.1.4.1.8708.2.56.2.5.1.1.3 | Unsigned32WithNA | read-only | An index that describes to which index in ifPerfAdminIf table this object is related. |
| PER ifPerfL1Period | 1.3.6.1.4.1.8708.2.56.2.5.1.1.4 | PerfPeriodWithNA | read-only | Period, 15 minute or 24 hour. - 15 minute interval measurements per measurement point - 24 hour interval measurements per measurement point |
| L1M ifPerfL1Type | 1.3.6.1.4.1.8708.2.56.2.5.1.1.5 | L1MeasurementTypeWithNA | read-only | The direction type of signal the interface expects. rx - Only ingoing signal. tx - Only outgoing signal. |
| UNS ifPerfL1MaxUtilization | 1.3.6.1.4.1.8708.2.56.2.5.1.1.6 | Unsigned32WithNA | read-only | The maximum bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval. |
| UNS ifPerfL1AverageUtilization | 1.3.6.1.4.1.8708.2.56.2.5.1.1.7 | Unsigned32WithNA | read-only | The average bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval. |
| UNS ifPerfL1CurrentUtilization | 1.3.6.1.4.1.8708.2.56.2.5.1.1.8 | Unsigned32WithNA | read-only | The Current bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval. |
| ifPerfL0List | 1.3.6.1.4.1.8708.2.56.2.6 | |||
| ifPerfL0Table | 1.3.6.1.4.1.8708.2.56.2.6.1 | not-accessible | The ifPerfL0 performance group contains information and configuration for all ifPerfL0 performance objects. | |
| ifPerfL0Entry | 1.3.6.1.4.1.8708.2.56.2.6.1.1 | not-accessible | An entry in the ifPerfL0 list. | |
| U32 ifPerfL0Index | 1.3.6.1.4.1.8708.2.56.2.6.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| STR ifPerfL0Name | 1.3.6.1.4.1.8708.2.56.2.6.1.1.2 | MgmtNameString | read-create | The management name of the performance object, for example 'clientL0:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfL0ConnIfPerfAdminIfIndex | 1.3.6.1.4.1.8708.2.56.2.6.1.1.3 | Unsigned32WithNA | read-only | An index that describes to which index in ifPerfAdminIf table this object is related. |
| SIG ifPerfL0RxPower | 1.3.6.1.4.1.8708.2.56.2.6.1.1.4 | Signed32WithNA | read-only | Received power in units of 0.1 dBm. |
| SIG ifPerfL0TxPower | 1.3.6.1.4.1.8708.2.56.2.6.1.1.5 | Signed32WithNA | read-only | Transmitted power in units of 0.1 dBm. |
| SIG ifPerfL0InitialRxPower | 1.3.6.1.4.1.8708.2.56.2.6.1.1.6 | Signed32WithNA | read-only | Initial received power in units of 0.1 dBm. The value is set using the install command. |
| SIG ifPerfL0ChromaticDispersion | 1.3.6.1.4.1.8708.2.56.2.6.1.1.7 | Signed32WithNA | read-only | Received chromatic dispersion that describe the spreading of a light pulse as it travels down a fiber when light pulses launched close together. |
| UNS ifPerfL0DifferentialGroupDelay | 1.3.6.1.4.1.8708.2.56.2.6.1.1.8 | Unsigned32WithNA | read-only | The arrival time difference between two polarization states at the output of the media (fiber). |
| UNS ifPerfL0InitialDifferentialGroupDelay | 1.3.6.1.4.1.8708.2.56.2.6.1.1.9 | Unsigned32WithNA | read-write | The initial received differential group delay in units of picoseconds. The value is set using the install command. |
| U32 ifPerfL0UpId | 1.3.6.1.4.1.8708.2.56.2.6.1.1.10 | Unsigned32 | read-only | Identity in the UP for the Perf Admin entry |
| UNS ifPerfL0OpticalSNR | 1.3.6.1.4.1.8708.2.56.2.6.1.1.11 | Unsigned32WithNA | read-only | OSNR of the received signal (dB/0.1nm) reported by the coherent module receiver. |
| UNS ifPerfL0QFactor | 1.3.6.1.4.1.8708.2.56.2.6.1.1.12 | Unsigned32WithNA | read-only | Pre-FEC Q factor (dB). |
| ifPerfL2StatList | 1.3.6.1.4.1.8708.2.56.2.7 | |||
| ifPerfL2StatTable | 1.3.6.1.4.1.8708.2.56.2.7.1 | not-accessible | The ifPerfL2Stat performance group contains information and configuration for all ifPerfL2Stat performance objects. | |
| ifPerfL2StatEntry | 1.3.6.1.4.1.8708.2.56.2.7.1.1 | not-accessible | An entry in the ifPerfL2Stat list. | |
| U32 ifPerfL2StatIndex | 1.3.6.1.4.1.8708.2.56.2.7.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| STR ifPerfL2StatName | 1.3.6.1.4.1.8708.2.56.2.7.1.1.2 | MgmtNameString | read-only | The management name of the performance object, for example 'clientL2:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfL2StatConnIfPerfAdminIfIndex | 1.3.6.1.4.1.8708.2.56.2.7.1.1.3 | Unsigned32WithNA | read-only | An index that describes to which index in ifPerfAdminIf table this object is related. |
| PER ifPerfL2StatPeriod | 1.3.6.1.4.1.8708.2.56.2.7.1.1.4 | PerfPeriodWithNA | read-only | Period, 15 minute or 24 hour. - 15 minute interval measurements per measurement point - 24 hour interval measurements per measurement point |
| L2M ifPerfL2StatType | 1.3.6.1.4.1.8708.2.56.2.7.1.1.5 | L2MeasurementTypeWithNA | read-only | The direction type of signal the interface expects. rx - Only ingoing signal. tx - Only outgoing signal. |
| C64 ifPerfL2StatCurrentFramesEx | 1.3.6.1.4.1.8708.2.56.2.7.1.1.6 | Counter64 | read-only | The amount of Ethernet frames during a particular interval. |
| C64 ifPerfL2StatCurrentBytes | 1.3.6.1.4.1.8708.2.56.2.7.1.1.7 | Counter64 | read-only | The amount of bytes during a particular interval. |
| C64 ifPerfL2StatCurrentUnicastFrames | 1.3.6.1.4.1.8708.2.56.2.7.1.1.8 | Counter64 | read-only | The amount of Ethernet unicast frames during a particular interval. |
| C64 ifPerfL2StatCurrentMulticastFrames | 1.3.6.1.4.1.8708.2.56.2.7.1.1.9 | Counter64 | read-only | The amount of Ethernet multicast frames during a particular interval. |
| C64 ifPerfL2StatCurrentBroadcastFrames | 1.3.6.1.4.1.8708.2.56.2.7.1.1.10 | Counter64 | read-only | The amount of Ethernet broadcast frames during a particular interval. |
| UNS ifPerfL2StatMaxUtilization | 1.3.6.1.4.1.8708.2.56.2.7.1.1.11 | Unsigned32WithNA | read-only | The maximum bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval. |
| UNS ifPerfL2StatAverageUtilization | 1.3.6.1.4.1.8708.2.56.2.7.1.1.12 | Unsigned32WithNA | read-only | The average bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval. |
| UNS ifPerfL2StatCurrentUtilization | 1.3.6.1.4.1.8708.2.56.2.7.1.1.13 | Unsigned32WithNA | read-only | The Current bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval. |
| ifPerfL2ErrorList | 1.3.6.1.4.1.8708.2.56.2.8 | |||
| ifPerfL2ErrorTable | 1.3.6.1.4.1.8708.2.56.2.8.1 | not-accessible | The ifPerfL2Error performance group contains information and configuration for all ifPerfL2Error performance objects. | |
| ifPerfL2ErrorEntry | 1.3.6.1.4.1.8708.2.56.2.8.1.1 | not-accessible | An entry in the ifPerfL2Error list. | |
| U32 ifPerfL2ErrorIndex | 1.3.6.1.4.1.8708.2.56.2.8.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| STR ifPerfL2ErrorName | 1.3.6.1.4.1.8708.2.56.2.8.1.1.2 | MgmtNameString | read-only | The management name of the performance object, for example 'clientL2:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfL2ErrorConnIfPerfAdminIfIndex | 1.3.6.1.4.1.8708.2.56.2.8.1.1.3 | Unsigned32WithNA | read-only | An index that describes to which index in ifPerfAdminIf table this object is related. |
| PER ifPerfL2ErrorPeriod | 1.3.6.1.4.1.8708.2.56.2.8.1.1.4 | PerfPeriodWithNA | read-only | Period, 15 minute or 24 hour. - 15 minute interval measurements per measurement point - 24 hour interval measurements per measurement point |
| L2M ifPerfL2ErrorType | 1.3.6.1.4.1.8708.2.56.2.8.1.1.5 | L2MeasurementTypeWithNA | read-only | The direction type of signal the interface expects. rx - Only ingoing signal. tx - Only outgoing signal. |
| C64 ifPerfL2ErrorCurrentUndersizedFrames | 1.3.6.1.4.1.8708.2.56.2.8.1.1.6 | Counter64 | read-only | The amount of undersized Ethernet frames during a particular interval. |
| C64 ifPerfL2ErrorCurrentOversizedFrames | 1.3.6.1.4.1.8708.2.56.2.8.1.1.7 | Counter64 | read-only | The amount of oversized Ethernet frames during a particular interval. Frames with a length over 9600 bytes are counted as oversized frames. |
| C64 ifPerfL2ErrorCurrentFragments | 1.3.6.1.4.1.8708.2.56.2.8.1.1.8 | Counter64 | read-only | The amount of fragmented Ethernet frames during a particular interval. |
| C64 ifPerfL2ErrorCurrentFcsErrors | 1.3.6.1.4.1.8708.2.56.2.8.1.1.9 | Counter64 | read-only | The amount of Ethernet frames with FCS or alignment errors during a particular interval. |
| C64 ifPerfL2ErrorUndersizedFramesThreshold | 1.3.6.1.4.1.8708.2.56.2.8.1.1.10 | Counter64 | read-write | Sets the threshold for the undersized frames alarm. |
| C64 ifPerfL2ErrorOversizedFramesThreshold | 1.3.6.1.4.1.8708.2.56.2.8.1.1.11 | Counter64 | read-write | Sets the threshold for the oversized frames alarm. A value 0 (zero) will disable the alarm. |
| C64 ifPerfL2ErrorFragmentsThreshold | 1.3.6.1.4.1.8708.2.56.2.8.1.1.12 | Counter64 | read-write | Sets the threshold for the fragmented frames alarm. |
| C64 ifPerfL2ErrorFcsErrorsThreshold | 1.3.6.1.4.1.8708.2.56.2.8.1.1.13 | Counter64 | read-write | Sets the threshold for the FCS errors alarm. |
| FAU ifPerfL2ErrorUndersizedFramesFault | 1.3.6.1.4.1.8708.2.56.2.8.1.1.14 | FaultStatusWithNA | read-only | Undersized frames threshold exceeded. alarm: The number of undersized frames during a period exceeds the associated threshold. ok: At the start of a new period the associated undersized frames counter is reset to zero. At the same time the fault status is cleared. |
| FAU ifPerfL2ErrorOversizedFramesFault | 1.3.6.1.4.1.8708.2.56.2.8.1.1.15 | FaultStatusWithNA | read-only | Oversized frames threshold exceeded. alarm: The number of oversized frames during a period exceeds the associated threshold. ok: At the start of a new period the associated oversized frames counter is reset to zero. At the same time the fault status is cleared. |
| FAU ifPerfL2ErrorFragmentsFault | 1.3.6.1.4.1.8708.2.56.2.8.1.1.16 | FaultStatusWithNA | read-only | Fragments threshold exceeded. alarm: The number of fragmented frames during a period exceeds the associated threshold. ok: At the start of a new period the associated fragmented frames counter is reset to zero. At the same time the fault status is cleared. |
| FAU ifPerfL2ErrorFcsErrorsFault | 1.3.6.1.4.1.8708.2.56.2.8.1.1.17 | FaultStatusWithNA | read-only | FCS errors threshold exceeded. alarm: The number of FCS or alignment errors during a period exceeds the associated threshold. ok: At the start of a new period the associated FCS error counter is reset to zero. At the same time the fault status is cleared. |
| ifPerfDelayList | 1.3.6.1.4.1.8708.2.56.2.9 | |||
| ifPerfDelayTable | 1.3.6.1.4.1.8708.2.56.2.9.1 | not-accessible | The Delay group group contains information and configuration for the delay measurment of line ports. | |
| ifPerfDelayEntry | 1.3.6.1.4.1.8708.2.56.2.9.1.1 | not-accessible | An entry in the ifPerf Delay list. | |
| U32 ifPerfDelayIndex | 1.3.6.1.4.1.8708.2.56.2.9.1.1.1 | Unsigned32 | read-only | An index assigned to each entry. |
| U32 ifPerfDelayUId | 1.3.6.1.4.1.8708.2.56.2.9.1.1.2 | Unsigned32 | read-only | An unique identifier assigned to each entry. |
| STR ifPerfDelayName | 1.3.6.1.4.1.8708.2.56.2.9.1.1.3 | MgmtNameString | read-only | The management name of the object, for example 'delay:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers. |
| UNS ifPerfDelayTwoWayFiberDelay | 1.3.6.1.4.1.8708.2.56.2.9.1.1.4 | Unsigned32WithNA | read-only | The measured delay in ns. |
| UNS ifPerfDelayConnIfPerfAdminIfIndex | 1.3.6.1.4.1.8708.2.56.2.9.1.1.5 | Unsigned32WithNA | read-only | An index that describes to which index in ifPerfAdminIf table this object is related. |
RFC description
Manages interface performance metrics including FEC, G.826, L0-L2 statistics for optical networks.
Start monitoring Infinera optical/DWDM network element (interface performance/FEC/G.826) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.