All MIBs › LUM-IFPERF-MIB › ifPerfL2StatMaxUtilization
ifPerfL2StatMaxUtilization
Module: LUM-IFPERF-MIB
OID (symbolic): LUM-IFPERF-MIB::ifPerfL2StatMaxUtilization
OID (numeric): 1.3.6.1.4.1.8708.2.56.2.7.1.1.11
Node type: OBJECT-TYPE
Type: Unsigned32WithNA
Access: read-only
Description: The maximum bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval.
What is ifPerfL2StatMaxUtilization?
The peak bandwidth utilization of the received or transmitted Ethernet signal during the interval, letting an admin spot brief traffic bursts that would be hidden by an average figure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.56.2.7.1.1.11 snmpwalk -v2c -c public <target> LUM-IFPERF-MIB::ifPerfL2StatMaxUtilization
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.56.2.7.1.1.11.1 snmpget -v2c -c public <target> LUM-IFPERF-MIB::ifPerfL2StatMaxUtilization.1
Start monitoring Infinera optical/DWDM network element (interface performance/FEC/G.826) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-IFPERF-MIB::ifPerfL2StatMaxUtilization OID value, configure state conditions and alerts, and monitor any Infinera optical/DWDM network element (interface performance/FEC/G.826) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8708 | lumentis | LUM-REG |
| 1.3.6.1.4.1.8708.2 | lumGeneric | LUM-REG |
| 1.3.6.1.4.1.8708.2.56 | lumIfPerfMIB | LUM-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8708.2.56.2 | lumIfPerfMIBObjects | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.7 | ifPerfL2StatList | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.7.1 | ifPerfL2StatTable | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.7.1.1 | ifPerfL2StatEntry | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.7.1.1.11 | ifPerfL2StatMaxUtilization | LUM-IFPERF-MIB |