NBS-OTNPM-MIB

All MIBs › NBS-OTNPM-MIB

Organization: NBS

Last Updated: 2014-01-23

Category: Optical Networking

Description: Monitors OTN performance metrics including errored seconds, severely errored seconds, and unavailable seconds on NBS gear.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NBS-OTNPM-MIB?

NBS-OTNPM-MIB is an NBS optical transport equipment MIB for Optical Transport Network (OTN) performance monitoring, tracking standard transmission quality statistics such as errored seconds (ES), severely errored seconds (SES), and background block errors (BBE), as its module description confirms ("OTN Performance Monitoring and user-controlled statistics"). It exposes a configurable-threshold table (nbsOtnpmThresholdsTable), keyed by interface (nbsOtnpmThresholdsIfIndex), monitoring interval, and scope, with threshold values for Es, EsrSig/EsrExp (signaled/expected errored-second ratios), Ses, SesrSig/SesrExp, and Bbe. This is a performance/fault MIB focused on physical-layer and framing quality of optical links — administrators monitor these error-second and block-error counters against configured thresholds to detect degrading fiber links, signal quality issues, or optical equipment faults before they escalate to service-affecting outages. It builds on standard OTN performance-monitoring parameter definitions (ES/SES/BBE terminology) common across optical transport MIBs, and likely depends on interface-index conventions for interface identification. It is deployed on NBS optical transport/DWDM chassis equipment carrying OTN-framed traffic. Engineers can download the NBS-OTNPM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NBS-OTNPM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NBS optical transport / OTN chassis equipment

Monitoring Examples

An operator polls nbsOtnpmThresholdsTable (indexed by nbsOtnpmThresholdsIfIndex and nbsOtnpmThresholdsInterval) to compare live Es and Ses counts against the configured nbsOtnpmThresholdsEsrSig/EsrExp and Sesr thresholds for a given optical interface; a link whose errored-second count regularly exceeds its threshold signals a degrading optical path (e.g., fiber attenuation or a failing transceiver) needing preventive maintenance before it triggers a hard outage.

What Can Be Monitored

errored seconds (ES)
severely errored seconds (SES)
background block errors (BBE)
per-interface performance thresholds
monitoring interval/scope configuration

Imported Objects

From IF-MIB

InterfaceIndex
ifAlias	OBJECT-TYPE

From NBS-MIB

Unsigned64
WritableU64
nbs	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using nbsOtnpmRunningEs OID:

Select an NBS optical transport/OTN chassis equipment (performance monitoring) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type nbsOtnpmRunningEs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Errored Seconds (ES) since protocol configuration. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
nbsOtnpmMib	1.3.6.1.4.1.629.222			OTN Performance Monitoring and user-controlled statistics
nbsOtnpmThresholdsGrp	1.3.6.1.4.1.629.222.1			Maximum considered safe by user
nbsOtnpmThresholdsTable	1.3.6.1.4.1.629.222.1.1		not-accessible	OTN Performance Monitoring thresholds
nbsOtnpmThresholdsEntry	1.3.6.1.4.1.629.222.1.1.1		not-accessible	Performance monitoring thresholds for a particular interface
NUM nbsOtnpmThresholdsIfIndex	1.3.6.1.4.1.629.222.1.1.1.1	InterfaceIndex	read-only	The mib2 ifIndex
INT nbsOtnpmThresholdsInterval	1.3.6.1.4.1.629.222.1.1.1.2	INTEGER	read-only	Indicates the sampling period to which these thresholds apply
INT nbsOtnpmThresholdsScope	1.3.6.1.4.1.629.222.1.1.1.3	INTEGER	read-only	This object specifies the network segment to which these thresholds apply.
U32 nbsOtnpmThresholdsEs	1.3.6.1.4.1.629.222.1.1.1.10	Unsigned32	read-write	Persistent. The number of Errored Seconds (ES) which, if met or exceeded at the end of the nbsOtnpmThresholdsInterval period, should trigger the nbsOtnpmTrapsEs event notification. The reserved value 0 disables notifications for this event.
INT nbsOtnpmThresholdsEsrSig	1.3.6.1.4.1.629.222.1.1.1.11	INTEGER	read-write	Persistent. The significand of the Errored Seconds Ratio (ESR) threshold, which is calculated by: nbsOtnpmThresholdsEsrSig x 10^nbsOtnpmThresholdsEsrExp An ESR that meets or exceeds this threshold at the end of the nbsOtnpmThresholdsInterval period triggers the nbsOtnpmTrapsEsr event notification. The reserved value 0 disables notifications for this event.
I32 nbsOtnpmThresholdsEsrExp	1.3.6.1.4.1.629.222.1.1.1.12	Integer32	read-write	Persistent. The exponent of the Errored Seconds Ratio (ESR) threshold; see nbsOtnpmThresholdsEsrSig. Not supported value: 0x80000000
U32 nbsOtnpmThresholdsSes	1.3.6.1.4.1.629.222.1.1.1.13	Unsigned32	read-write	Persistent. The number of Severely Errored Seconds (SES) which, if met or exceeded at the end of the nbsOtnpmThresholdsInterval period, should trigger the nbsOtnpmTrapsSes event notification. The reserved value 0 disables notifications for this event.
INT nbsOtnpmThresholdsSesrSig	1.3.6.1.4.1.629.222.1.1.1.14	INTEGER	read-write	Persistent. The significand of the Severely Errored Seconds Ratio (SESR) threshold, which is calculated by: nbsOtnpmThresholdsSesrSig x 10^nbsOtnpmThresholdsSesrExp A SESR that meets or exceeds this threshold at the end of the nbsOtnpmThresholdsInterval period triggers the nbsOtnpmTrapsSesr notification. The reserved value 0 disables notifications for this event.
I32 nbsOtnpmThresholdsSesrExp	1.3.6.1.4.1.629.222.1.1.1.15	Integer32	read-write	Persistent. The exponent of the Severely Errored Seconds Ratio (SESR) threshold; see nbsOtnpmThresholdsSesrSig. Not supported value: 0x80000000
WRI nbsOtnpmThresholdsBbe	1.3.6.1.4.1.629.222.1.1.1.16	WritableU64	read-write	Persistent. The number of Background Block Errors (BBE) which, if met or exceeded at the end of the nbsOtnpmThresholdsInterval period, should trigger the nbsOtnpmTrapsBbe event notification. The reserved value 0 disables notifications for this event.
INT nbsOtnpmThresholdsBberSig	1.3.6.1.4.1.629.222.1.1.1.17	INTEGER	read-write	Persistent. The significand of the Background Block Errors Ratio (BBER) threshold, which is calculated by: nbsOtnpmThresholdsBberSig x 10^nbsOtnpmThresholdsBberExp A BBER that meets or exceeds this threshold at the end of the nbsOtnpmThresholdsInterval period triggers the nbsOtnpmTrapsBber notification. The reserved value 0 disables notifications for this event.
I32 nbsOtnpmThresholdsBberExp	1.3.6.1.4.1.629.222.1.1.1.18	Integer32	read-write	Persistent. The exponent of the Background Block Errors Ratio (BBER) threshold; see nbsOtnpmThresholdsBberSig. Not supported value: 0x80000000
U32 nbsOtnpmThresholdsUas	1.3.6.1.4.1.629.222.1.1.1.19	Unsigned32	read-write	Persistent. The number of Unavailable Seconds (UAS) which, if met or exceeded at the end of the nbsOtnpmThresholdsInterval period, should trigger the nbsOtnpmTrapsUas event notification. The reserved value 0 disables notifications for this event.
WRI nbsOtnpmThresholdsFc	1.3.6.1.4.1.629.222.1.1.1.20	WritableU64	read-write	Persistent. The number of Failure Counts (FC) which, if met or exceeded at the end of the nbsOtnpmThresholdsInterval period, should trigger the nbsOtnpmTrapsFc event notification. The reserved value 0 disables notifications for this event.
nbsOtnpmCurrentGrp	1.3.6.1.4.1.629.222.2			Subtotals and statistics for sample now underway
nbsOtnpmCurrentTable	1.3.6.1.4.1.629.222.2.3		not-accessible	All OTN Performance Monitoring statistics for the nbsOtnpmCurrentInterval now underway.
nbsOtnpmCurrentEntry	1.3.6.1.4.1.629.222.2.3.1		not-accessible	OTN Performance Monitoring statistics for a specific port/ interface and nbsOtnpmCurrentInterval.
NUM nbsOtnpmCurrentIfIndex	1.3.6.1.4.1.629.222.2.3.1.1	InterfaceIndex	read-only	The mib2 ifIndex
INT nbsOtnpmCurrentInterval	1.3.6.1.4.1.629.222.2.3.1.2	INTEGER	read-only	Indicates the sampling period of statistic
INT nbsOtnpmCurrentScope	1.3.6.1.4.1.629.222.2.3.1.3	INTEGER	read-only	Indicates statistic's network segment
INT nbsOtnpmCurrentDate	1.3.6.1.4.1.629.222.2.3.1.5	INTEGER	read-only	The date (UTC) this interval began, represented by an eight digit decimal number: yyyymmdd
INT nbsOtnpmCurrentTime	1.3.6.1.4.1.629.222.2.3.1.6	INTEGER	read-only	The time (UTC) this interval began, represented by a six digit decimal number: hhmmss
U32 nbsOtnpmCurrentEs	1.3.6.1.4.1.629.222.2.3.1.10	Unsigned32	read-only	The number of Errored Seconds (ES) in this interval so far.
INT nbsOtnpmCurrentEsrSig	1.3.6.1.4.1.629.222.2.3.1.11	INTEGER	read-only	The significand of the current Errored Seconds Ratio (ESR), which is calculated by: nbsOtnpmCurrentEsrSig x 10^nbsOtnpmCurrentEsrExp
I32 nbsOtnpmCurrentEsrExp	1.3.6.1.4.1.629.222.2.3.1.12	Integer32	read-only	The exponent of the current Errored Seconds Ratio (ESR); see nbsOtnpmCurrentEsrSig. Not supported value: 0x80000000
U32 nbsOtnpmCurrentSes	1.3.6.1.4.1.629.222.2.3.1.13	Unsigned32	read-only	The number of Severely Errored Seconds (SES) in this interval so far
INT nbsOtnpmCurrentSesrSig	1.3.6.1.4.1.629.222.2.3.1.14	INTEGER	read-only	The significand of the current Severely Errored Seconds Ratio (SESR), which is calculated by: nbsOtnpmCurrentSesrSig x 10^nbsOtnpmCurrentSesrExp
I32 nbsOtnpmCurrentSesrExp	1.3.6.1.4.1.629.222.2.3.1.15	Integer32	read-only	The exponent of the current Severely Errored Seconds Ratio (SESR); see nbsOtnpmCurrentSesrSig. Not supported value: 0x80000000
UNS nbsOtnpmCurrentBbe	1.3.6.1.4.1.629.222.2.3.1.16	Unsigned64	read-only	The number of Background Block Errors (BBE) so far, i.e. the count of Bit Interleave Parity (BIP8) errors.
INT nbsOtnpmCurrentBberSig	1.3.6.1.4.1.629.222.2.3.1.17	INTEGER	read-only	The significand of the current Background Block Errors (BBER), which is calculated by: nbsOtnpmCurrentBberSig x 10^nbsOtnpmCurrentBberExp
I32 nbsOtnpmCurrentBberExp	1.3.6.1.4.1.629.222.2.3.1.18	Integer32	read-only	The exponent of the current Background Block Errors Ratio (BBER); see nbsOtnpmCurrentBberSig. Not supported value: 0x80000000
U32 nbsOtnpmCurrentUas	1.3.6.1.4.1.629.222.2.3.1.19	Unsigned32	read-only	The number of Unavailable Seconds (UAS) so far
UNS nbsOtnpmCurrentFc	1.3.6.1.4.1.629.222.2.3.1.20	Unsigned64	read-only	The number of Failure Counts (FC) so far, i.e. the count of Backward Error Indication (BEI) errors.
NBS nbsOtnpmCurrentAlarmsSupported	1.3.6.1.4.1.629.222.2.3.1.100	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are supported.
NBS nbsOtnpmCurrentAlarmsRaised	1.3.6.1.4.1.629.222.2.3.1.101	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are currently raised.
NBS nbsOtnpmCurrentAlarmsChanged	1.3.6.1.4.1.629.222.2.3.1.102	NbsOtnAlarmMask	read-only	The mask of OTN alarms that have changed so far, i.e. alarms that have transitioned at least once from clear to raised or from raised to clear.
nbsOtnpmHistoricGrp	1.3.6.1.4.1.629.222.3			Totals and final statistics for a previous sample
nbsOtnpmHistoricTable	1.3.6.1.4.1.629.222.3.3		not-accessible	All OTN Performance Monitoring statistics for past nbsOtnpmHistoricInterval periods.
nbsOtnpmHistoricEntry	1.3.6.1.4.1.629.222.3.3.1		not-accessible	OTN Performance Monitoring statistics for a specific port/ interface and nbsOtnpmHistoricInterval.
NUM nbsOtnpmHistoricIfIndex	1.3.6.1.4.1.629.222.3.3.1.1	InterfaceIndex	read-only	The mib2 ifIndex
INT nbsOtnpmHistoricInterval	1.3.6.1.4.1.629.222.3.3.1.2	INTEGER	not-accessible	Indicates the sampling period of statistic
INT nbsOtnpmHistoricScope	1.3.6.1.4.1.629.222.3.3.1.3	INTEGER	not-accessible	Indicates statistic's network segment
INT nbsOtnpmHistoricSample	1.3.6.1.4.1.629.222.3.3.1.4	INTEGER	not-accessible	Indicates the sample number of this statistic. The most recent sample is numbered 1, the next previous 2, and so on until the oldest sample.
INT nbsOtnpmHistoricDate	1.3.6.1.4.1.629.222.3.3.1.5	INTEGER	read-only	The date (UTC) the interval began, represented by an eight digit decimal number: yyyymmdd
INT nbsOtnpmHistoricTime	1.3.6.1.4.1.629.222.3.3.1.6	INTEGER	read-only	The time (UTC) the interval began, represented by a six digit decimal number: hhmmss
U32 nbsOtnpmHistoricEs	1.3.6.1.4.1.629.222.3.3.1.10	Unsigned32	read-only	The final count of Errored Seconds (ES) for this interval
INT nbsOtnpmHistoricEsrSig	1.3.6.1.4.1.629.222.3.3.1.11	INTEGER	read-only	The significand of the final Errored Seconds Ratio (ESR) for this interval, which is calculated by: nbsOtnpmHistoricEsrSig x 10^nbsOtnpmHistoricEsrExp
I32 nbsOtnpmHistoricEsrExp	1.3.6.1.4.1.629.222.3.3.1.12	Integer32	read-only	The exponent of the final Errored Seconds Ratio (ESR) for this interval; see nbsOtnpmHistoricEsrSig. Not supported value: 0x80000000
U32 nbsOtnpmHistoricSes	1.3.6.1.4.1.629.222.3.3.1.13	Unsigned32	read-only	The final count of Severely Errored Seconds (SES) in this interval
INT nbsOtnpmHistoricSesrSig	1.3.6.1.4.1.629.222.3.3.1.14	INTEGER	read-only	The significand of the final Severely Errored Seconds Ratio (SESR) for this interval, which is calculated by: nbsOtnpmHistoricSesrSig x 10^nbsOtnpmHistoricSesrExp
I32 nbsOtnpmHistoricSesrExp	1.3.6.1.4.1.629.222.3.3.1.15	Integer32	read-only	The exponent of the final Severely Errored Seconds Ratio (SESR) for this interval; see nbsOtnpmHistoricSesrSig. Not supported value: 0x80000000
UNS nbsOtnpmHistoricBbe	1.3.6.1.4.1.629.222.3.3.1.16	Unsigned64	read-only	The final count of Background Block Errors (BBE), i.e. the count of Bit Interleave Parity (BIP8) errors.
INT nbsOtnpmHistoricBberSig	1.3.6.1.4.1.629.222.3.3.1.17	INTEGER	read-only	The significand of the final Background Block Errors Ratio (BBER) for this interval, which is calculated by: nbsOtnpmHistoricBberSig x 10^nbsOtnpmHistoricBberExp)
I32 nbsOtnpmHistoricBberExp	1.3.6.1.4.1.629.222.3.3.1.18	Integer32	read-only	The exponent of the final Background Block Errors Ratio (BBER) for this interval; see nbsOtnpmHistoricBberSig. Not supported value: 0x80000000
U32 nbsOtnpmHistoricUas	1.3.6.1.4.1.629.222.3.3.1.19	Unsigned32	read-only	The final count of Unavailable Seconds (UAS)
UNS nbsOtnpmHistoricFc	1.3.6.1.4.1.629.222.3.3.1.20	Unsigned64	read-only	The final number of Failure Counts (FC), i.e. the count of Backward Error Indication (BEI) errors.
NBS nbsOtnpmHistoricAlarmsSupported	1.3.6.1.4.1.629.222.3.3.1.100	NbsOtnAlarmMask	read-only	The mask of OTN alarms that were supported.
NBS nbsOtnpmHistoricAlarmsRaised	1.3.6.1.4.1.629.222.3.3.1.101	NbsOtnAlarmMask	read-only	The mask of OTN alarms that were raised at the end of this interval.
NBS nbsOtnpmHistoricAlarmsChanged	1.3.6.1.4.1.629.222.3.3.1.102	NbsOtnAlarmMask	read-only	The mask of OTN alarms that changed in this interval, i.e. alarms that transitioned at least once from clear to raised or from raised to clear.
nbsOtnpmRunningGrp	1.3.6.1.4.1.629.222.4			Totals and statistics since (boot-up) protocol configuration
nbsOtnpmRunningTable	1.3.6.1.4.1.629.222.4.3		not-accessible	All OTN Performance Monitoring statistics since (boot-up) protocol configuration.
nbsOtnpmRunningEntry	1.3.6.1.4.1.629.222.4.3.1		not-accessible	OTN Performance Monitoring statistics for a specific port/ interface.
NUM nbsOtnpmRunningIfIndex	1.3.6.1.4.1.629.222.4.3.1.1	InterfaceIndex	read-only	The mib2 ifIndex
INT nbsOtnpmRunningScope	1.3.6.1.4.1.629.222.4.3.1.3	INTEGER	not-accessible	Indicates statistic's network segment
INT nbsOtnpmRunningDate	1.3.6.1.4.1.629.222.4.3.1.5	INTEGER	read-only	The date (UTC) of protocol configuration, represented by an eight digit decimal number: yyyymmdd
INT nbsOtnpmRunningTime	1.3.6.1.4.1.629.222.4.3.1.6	INTEGER	read-only	The time (UTC) of protocol configuration, represented by a six digit decimal number: hhmmss
C32 nbsOtnpmRunningEsEx	1.3.6.1.4.1.629.222.4.3.1.10	Counter32	read-only	The number of Errored Seconds (ES) since protocol configuration.
INT nbsOtnpmRunningEsrSig	1.3.6.1.4.1.629.222.4.3.1.11	INTEGER	read-only	The significand of the running Errored Seconds Ratio (ESR), which is calculated by: nbsOtnpmRunningEsrSig x 10^nbsOtnpmRunningEsrExp
I32 nbsOtnpmRunningEsrExp	1.3.6.1.4.1.629.222.4.3.1.12	Integer32	read-only	The exponent of the running Errored Seconds Ratio (ESR); see nbsOtnpmRunningEsrSig. Not supported value: 0x80000000
C32 nbsOtnpmRunningSes	1.3.6.1.4.1.629.222.4.3.1.13	Counter32	read-only	The number of Severely Errored Seconds (SES) since protocol configuration
INT nbsOtnpmRunningSesrSig	1.3.6.1.4.1.629.222.4.3.1.14	INTEGER	read-only	The significand of the running Severely Errored Seconds Ratio (SESR), which is calculated by: nbsOtnpmRunningSesrSig x 10^nbsOtnpmRunningSesrExp
I32 nbsOtnpmRunningSesrExp	1.3.6.1.4.1.629.222.4.3.1.15	Integer32	read-only	The exponent of the running Severely Errored Seconds Ratio (SESR); see nbsOtnpmRunningSesrSig. Not supported value: 0x80000000
C64 nbsOtnpmRunningBbe	1.3.6.1.4.1.629.222.4.3.1.16	Counter64	read-only	The number of Background Block Errors (BBE) since protocol configuration, i.e. the count of Bit Interleave Parity (BIP8) errors.
INT nbsOtnpmRunningBberSig	1.3.6.1.4.1.629.222.4.3.1.17	INTEGER	read-only	The significand of the running Background Block Errors (BBER), which is calculated by: nbsOtnpmRunningBberSig x 10^nbsOtnpmRunningBberExp
I32 nbsOtnpmRunningBberExp	1.3.6.1.4.1.629.222.4.3.1.18	Integer32	read-only	The exponent of the running Background Block Errors Ratio (BBER); see nbsOtnpmRunningBberSig. Not supported value: 0x80000000
C32 nbsOtnpmRunningUas	1.3.6.1.4.1.629.222.4.3.1.19	Counter32	read-only	The number of Unavailable Seconds (UAS) since protocol configuration
C64 nbsOtnpmRunningFc	1.3.6.1.4.1.629.222.4.3.1.20	Counter64	read-only	The number of Failure Counts (FC) since protocol configuration, i.e. the count of Backward Error Indication (BEI) errors.
NBS nbsOtnpmRunningAlarmsSupported	1.3.6.1.4.1.629.222.4.3.1.100	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are supported.
NBS nbsOtnpmRunningAlarmsRaised	1.3.6.1.4.1.629.222.4.3.1.101	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are currently raised.
NBS nbsOtnpmRunningAlarmsChanged	1.3.6.1.4.1.629.222.4.3.1.102	NbsOtnAlarmMask	read-only	The mask of OTN alarms that changed since protocol configuration, i.e. alarms that transitioned at least once from clear to raised or from raised to clear.
nbsOtnAlarmsGrp	1.3.6.1.4.1.629.222.80			OTN alarms
nbsOtnAlarmsTable	1.3.6.1.4.1.629.222.80.3		not-accessible	OTN alarm monitoring scoreboard, showing for each possible alarm if it is currently raised and if it has changed since monitoring began (or was cleared). The latter indicator may be cleared at anytime without affecting normal performance monitoring activity.
nbsOtnAlarmsEntry	1.3.6.1.4.1.629.222.80.3.1		not-accessible	OTN alarm monitoring scoreboard for a specific port/interface.
NUM nbsOtnAlarmsIfIndex	1.3.6.1.4.1.629.222.80.3.1.1	InterfaceIndex	read-only	The mib2 ifIndex
INT nbsOtnAlarmsDate	1.3.6.1.4.1.629.222.80.3.1.5	INTEGER	read-only	The date (UTC) OTN alarm monitoring began (was cleared), represented by an eight digit decimal number: yyyymmdd
INT nbsOtnAlarmsTime	1.3.6.1.4.1.629.222.80.3.1.6	INTEGER	read-only	The time (UTC) OTN alarm monitoring began (was cleared), represented by a six digit decimal number: hhmmss
INT nbsOtnAlarmsSpan	1.3.6.1.4.1.629.222.80.3.1.7	INTEGER	read-only	The amount of time (deci-sec) since nbsOtnAlarmsDate and nbsOtnAlarmsTime.
INT nbsOtnAlarmsState	1.3.6.1.4.1.629.222.80.3.1.8	INTEGER	read-write	This object reads 'notSupported' if the port is not configured with an OTN protocol. Otherwise it reads 'monitoring' to indicate that supported OTN alarms are actively reported in nbsOtnAlarmsRaised and nbsOtnAlarmsChanged. Writing 'clearing' to this object clears nbsOtnAlarmsChanged.
NBS nbsOtnAlarmsSupported	1.3.6.1.4.1.629.222.80.3.1.100	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are supported on this port.
NBS nbsOtnAlarmsRaised	1.3.6.1.4.1.629.222.80.3.1.101	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are currently raised.
NBS nbsOtnAlarmsChanged	1.3.6.1.4.1.629.222.80.3.1.102	NbsOtnAlarmMask	read-only	The mask of OTN alarms that have changed since nbsOtnAlarmsDate and AlarmsTime, i.e. alarms that have transitioned at least once from clear to raised or from raised to clear.
OCT nbsOtnAlarmsRcvdFTFL	1.3.6.1.4.1.629.222.80.3.1.110	OCTET STRING	read-only	The current Fault Type Fault Location information received on the given port. The length will be zero when there is a no fault code in both the forward and backward fields. Otherwise, the full 256 bytes will be provided; see ITU-T G.709, section 15.8.2.5.
nbsOtnStatsGrp	1.3.6.1.4.1.629.222.90			User-controlled OTN alarms and statistics
nbsOtnStatsTable	1.3.6.1.4.1.629.222.90.3		not-accessible	OTN alarms and statistics monitoring managed per user discretion. This monitoring may be started, stopped, and cleared as desired without affecting the normal performance monitoring activity.
nbsOtnStatsEntry	1.3.6.1.4.1.629.222.90.3.1		not-accessible	User-controlled OTN monitoring for a specific port/interface.
NUM nbsOtnStatsIfIndex	1.3.6.1.4.1.629.222.90.3.1.1	InterfaceIndex	read-only	The mib2 ifIndex
INT nbsOtnStatsDate	1.3.6.1.4.1.629.222.90.3.1.5	INTEGER	read-only	The date (UTC) OTN statistics collection began, represented by an eight digit decimal number: yyyymmdd
INT nbsOtnStatsTime	1.3.6.1.4.1.629.222.90.3.1.6	INTEGER	read-only	The time (UTC) OTN statistics collection began, represented by a six digit decimal number: hhmmss
INT nbsOtnStatsSpan	1.3.6.1.4.1.629.222.90.3.1.7	INTEGER	read-only	The amount of time (deci-sec) statistics collection has been underway since nbsOtnStatsDate and nbsOtnStatsTime, or if stopped, the duration of the prior collection.
INT nbsOtnStatsState	1.3.6.1.4.1.629.222.90.3.1.8	INTEGER	read-write	Writing 'stopped' to this object stops (pauses) OTN statistics collection. Re-configuring this port to a non-OTN protocol sets this object to 'stopped' automatically. Writing 'counting' to this object starts (resumes) OTN statistics collection if this port is configured with an OTN protocol. Writing 'clearing' to this object clears all statistical counters.
C64 nbsOtnStatsErrCntSectBEI	1.3.6.1.4.1.629.222.90.3.1.21	Counter64	read-only	The count of section Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntPathBEI	1.3.6.1.4.1.629.222.90.3.1.22	Counter64	read-only	The count of path Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm1BEI	1.3.6.1.4.1.629.222.90.3.1.23	Counter64	read-only	The count of TCM1 Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm2BEI	1.3.6.1.4.1.629.222.90.3.1.24	Counter64	read-only	The count of TCM2 Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm3BEI	1.3.6.1.4.1.629.222.90.3.1.25	Counter64	read-only	The count of TCM3 Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm4BEI	1.3.6.1.4.1.629.222.90.3.1.26	Counter64	read-only	The count of TCM4 Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm5BEI	1.3.6.1.4.1.629.222.90.3.1.27	Counter64	read-only	The count of TCM5 Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm6BEI	1.3.6.1.4.1.629.222.90.3.1.28	Counter64	read-only	The count of TCM6 Backward Error Indication errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntSectBIP8	1.3.6.1.4.1.629.222.90.3.1.31	Counter64	read-only	The count of section Bit Interleave Parity errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntPathBIP8	1.3.6.1.4.1.629.222.90.3.1.32	Counter64	read-only	The count of path Bit Interleave Parity errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm1BIP8	1.3.6.1.4.1.629.222.90.3.1.33	Counter64	read-only	The count of TCM1 Bit Interleave Parity errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm2BIP8	1.3.6.1.4.1.629.222.90.3.1.34	Counter64	read-only	The count of TCM2 Bit Interleave Parity errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm3BIP8	1.3.6.1.4.1.629.222.90.3.1.35	Counter64	read-only	The count of TCM3 Bit Interleave Parity errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm4BIP8	1.3.6.1.4.1.629.222.90.3.1.36	Counter64	read-only	The count of TCM4 Bit Interleave Parity errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm5BIP8	1.3.6.1.4.1.629.222.90.3.1.37	Counter64	read-only	The count of TCM5 Bit Interleave Parity errors detected since OTN statistics collection began.
C64 nbsOtnStatsErrCntTcm6BIP8	1.3.6.1.4.1.629.222.90.3.1.38	Counter64	read-only	The count of TCM6 Bit Interleave Parity errors detected since OTN statistics collection began.
NBS nbsOtnStatsAlarmsSupported	1.3.6.1.4.1.629.222.90.3.1.100	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are supported.
NBS nbsOtnStatsAlarmsRaised	1.3.6.1.4.1.629.222.90.3.1.101	NbsOtnAlarmMask	read-only	The mask of OTN alarms that are currently raised.
NBS nbsOtnStatsAlarmsChanged	1.3.6.1.4.1.629.222.90.3.1.102	NbsOtnAlarmMask	read-only	The mask of OTN alarms that have changed since OTN statistics collection began, i.e. alarms that have transitioned at least once from clear to raised or from raised to clear.
nbsOtnpmEventsGrp	1.3.6.1.4.1.629.222.100			Threshold crossing events
nbsOtnpmTraps	1.3.6.1.4.1.629.222.100.0			Threshold crossing Traps or Notifications
NTF nbsOtnpmTrapsEs	1.3.6.1.4.1.629.222.100.0.10			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsEs is non-zero and less than or equal to nbsOtnpmCurrentEs.
NTF nbsOtnpmTrapsEsr	1.3.6.1.4.1.629.222.100.0.11			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsEsr is non-zero and less than or equal to nbsOtnpmCurrentEsr.
NTF nbsOtnpmTrapsSes	1.3.6.1.4.1.629.222.100.0.12			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsSes is non-zero and less than or equal to nbsOtnpmCurrentSes.
NTF nbsOtnpmTrapsSesr	1.3.6.1.4.1.629.222.100.0.13			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsSesr is non-zero and less than or equal to nbsOtnpmCurrentSesr.
NTF nbsOtnpmTrapsBbe	1.3.6.1.4.1.629.222.100.0.14			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsBbe is non-zero and less than or equal to nbsOtnpmCurrentBbe.
NTF nbsOtnpmTrapsBber	1.3.6.1.4.1.629.222.100.0.15			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsBber is non-zero and less than or equal to nbsOtnpmCurrentBber.
NTF nbsOtnpmTrapsUas	1.3.6.1.4.1.629.222.100.0.16			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsUas is non-zero and less than or equal to nbsOtnpmCurrentUas.
NTF nbsOtnpmTrapsFc	1.3.6.1.4.1.629.222.100.0.17			Sent at the conclusion of an nbsOtnpmThresholdsInterval if nbsOtnpmThresholdsFc is non-zero and less than or equal to nbsOtnpmCurrentFc.

RFC description

OTN performance monitoring and statistics MIB, tracking optical transport network alarms and performance thresholds.

Start monitoring NBS optical transport/OTN chassis equipment (performance monitoring) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NBS-OTNPM-MIB