All MIBs › LUM-IFPERF-MIB › ifPerfL1MaxUtilization
ifPerfL1MaxUtilization
Module: LUM-IFPERF-MIB
OID (symbolic): LUM-IFPERF-MIB::ifPerfL1MaxUtilization
OID (numeric): 1.3.6.1.4.1.8708.2.56.2.5.1.1.6
Node type: OBJECT-TYPE
Type: Unsigned32WithNA
Access: read-only
Description: The maximum bandwidth utilization of the received or transmitted signal during a particular 15 minute or 24 hour interval.
What is ifPerfL1MaxUtilization?
The peak bandwidth utilization observed on the received or transmitted signal during the 15-minute or 24-hour interval, which an admin checks to spot brief traffic spikes that an average figure would smooth over.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.56.2.5.1.1.6 snmpwalk -v2c -c public <target> LUM-IFPERF-MIB::ifPerfL1MaxUtilization
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.56.2.5.1.1.6.1 snmpget -v2c -c public <target> LUM-IFPERF-MIB::ifPerfL1MaxUtilization.1
Start monitoring Infinera optical/DWDM network element (interface performance/FEC/G.826) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-IFPERF-MIB::ifPerfL1MaxUtilization OID value, configure state conditions and alerts, and monitor any Infinera optical/DWDM network element (interface performance/FEC/G.826) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8708 | lumentis | LUM-REG |
| 1.3.6.1.4.1.8708.2 | lumGeneric | LUM-REG |
| 1.3.6.1.4.1.8708.2.56 | lumIfPerfMIB | LUM-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8708.2.56.2 | lumIfPerfMIBObjects | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.5 | ifPerfL1List | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.5.1 | ifPerfL1Table | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.5.1.1 | ifPerfL1Entry | LUM-IFPERF-MIB |
| 1.3.6.1.4.1.8708.2.56.2.5.1.1.6 | ifPerfL1MaxUtilization | LUM-IFPERF-MIB |