LUM-IFBASIC-MIB

All MIBs › LUM-IFBASIC-MIB

Organization: Infinera Corporation

Last Updated: 2019-06-28

Category: Optical Networking

Description: Manages basic interface configuration and status on Infinera network elements.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LUM-IFBASIC-MIB?

LUM-IFBASIC-MIB is an Infinera proprietary module for managing basic port and interface objects on Infinera optical/network elements. It exposes general interface information (names, table sizes, and last-change timestamps), administrative configuration state, and signal-related status for each interface, organized into General, If, Admin, and Signal groups. Its monitoring value is primarily interface and configuration status: it lets an operator see how many interfaces exist, when their configuration or operational state last changed, and the current administrative/signal condition of each port. It works alongside Infinera's broader family of element-management MIBs, complementing standard IF-MIB-style interface concepts with vendor-specific detail. It is typically deployed on Infinera transport/optical network elements where operators track interface configuration churn and signal health as part of network element monitoring. Engineers can download the LUM-IFBASIC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LUM-IFBASIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Infinera optical network elements

Monitoring Examples

An operator would poll ifBasicIfTable/ifBasicIfEntry alongside ifBasicGeneralIfBasicIfConfigLastChangeTime and ifBasicGeneralIfBasicIfStateLastChangeTime to see which ports have recently changed configuration or operational state. An unexpected recent state-change timestamp on a port, combined with the ifBasicGeneralIfBasicSignalStateLastChangeTime, would flag a signal flap or interface state transition worth investigating.

What Can Be Monitored

interface table size and count
interface configuration last-change time
interface operational state last-change time
admin table configuration status
signal table configuration/state

Imported Objects

From LUM-REG

lumIfBasicMIB	OBJECT-IDENTITY
lumModules	OBJECT-IDENTITY

From LUM-TC

AdminStatusWithNA
AutoAlarmStatus
CommandString
ConnectorType
DisplayStringWithNA
EnabledDisabledWithNA
FaultStatusWithNA
InterfaceStatus
InterfaceType
Layer
MgmtNameString
OperStatusWithNA
OpticalLayerMappingType
PhysicalLayerMappingType
ResetWithNA
SignalDirection
SignalFormat
SignalStatusWithNA
Time7200min
Time7200minNo0
TribPortIdType
TruthValueWithNA
Unsigned32WithNA

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ADM ifBasicAdminAdminStatus	1.3.6.1.4.1.8708.2.46.2.3.1.1.8	AdminStatusWithNA	read-write	The administrative state of the ifBasic interface. down - The interface is de-activated. service - The interface is activated but alarms are suppressed. Intended for use during service or re-configuration. When service is concluded adminStatus should be set to 'up' again. Note that there is no difference between 'up' and 'service', if no alarms can be raised from this object. up - The interface will be activated when available. Alarms are not suppressed.
RES ifBasicAdminAutoAlarmEnableReset	1.3.6.1.4.1.8708.2.46.2.3.1.1.11	ResetWithNA	read-only	When the attribute is set to reset the auto-alarm enable function is re-initialised. Then the attribute is set to normal again automatically. reset - Re-initialises the auto-alarm enable function normal - The auto-alarm enable function is in normal state
AUT ifBasicAdminAutoAlarmEnableStatus	1.3.6.1.4.1.8708.2.46.2.3.1.1.10	AutoAlarmStatus	read-only	The state of auto alarm enable for the interface. suppressTrxAndSignal - Both signal alarms and trx alarms are suppressed suppressSignal - Only signal alarms are suppressed suppressNone - Neither trx nor signal alarms are suppressed
STR ifBasicAdminDescr	1.3.6.1.4.1.8708.2.46.2.3.1.1.3	DisplayStringWithNA	read-write	User configurable label.
ifBasicAdminEntry	1.3.6.1.4.1.8708.2.46.2.3.1.1		not-accessible	An entry in the ifBasic admin list.
ifBasicAdminGroupV1	1.3.6.1.4.1.8708.2.46.1.1.3			The ifBasic admin objects (R20.0).
ifBasicAdminGroupV2	1.3.6.1.4.1.8708.2.46.1.1.11			The ifBasic admin objects (R28.0).
ifBasicAdminGroupV3	1.3.6.1.4.1.8708.2.46.1.1.13			The ifBasic admin objects (R31.0).
ifBasicAdminGroupV4	1.3.6.1.4.1.8708.2.46.1.1.15			The ifBasic admin objects (R32.0).
UNS ifBasicAdminIfNo	1.3.6.1.4.1.8708.2.46.2.3.1.1.13	Unsigned32WithNA	read-create	The physical interface number of the actual multi-connector port.
NUM ifBasicAdminIfType	1.3.6.1.4.1.8708.2.46.2.3.1.1.14	InterfaceType	read-create	Type of interface (Individual or bundled).
U32 ifBasicAdminIndex	1.3.6.1.4.1.8708.2.46.2.3.1.1.1	Unsigned32	read-only	An index assigned to each entry.
NUM ifBasicAdminInterfaceStatus	1.3.6.1.4.1.8708.2.46.2.3.1.1.12	InterfaceStatus	read-only	The status of the traffic interface. outOfService - No PM and no alarms. autoInService - No PM and no alarms. Changes to 'inService' when OK. inService - Reports PM and alarms. maintenance - Maintenance mode.
ifBasicAdminList	1.3.6.1.4.1.8708.2.46.2.3
STR ifBasicAdminName	1.3.6.1.4.1.8708.2.46.2.3.1.1.2	MgmtNameString	read-only	The management name of the interface, for example 'admin:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.
TRU ifBasicAdminNotAvailableForUse	1.3.6.1.4.1.8708.2.46.2.3.1.1.15	TruthValueWithNA	read-only	Is the interface not available for use. The interface may be created in order to show some physical properties but may otherwise be unavailable for service depending on setup and available resources.
OPE ifBasicAdminOperStatus	1.3.6.1.4.1.8708.2.46.2.3.1.1.9	OperStatusWithNA	read-only	The operational state for the interface. notPresent - The interface is not available. down - The interface is de-activated or there are faults preventing its transition to the 'up' state. up - The interface is active.
UNS ifBasicAdminRxPort	1.3.6.1.4.1.8708.2.46.2.3.1.1.7	Unsigned32WithNA	read-create	The receiving physical port that this interface is bound to.
UNS ifBasicAdminSlot	1.3.6.1.4.1.8708.2.46.2.3.1.1.5	Unsigned32WithNA	read-create	The slot of the physical port that this interface is bound to.
UNS ifBasicAdminSubrack	1.3.6.1.4.1.8708.2.46.2.3.1.1.4	Unsigned32WithNA	read-create	The subrack of the physical port that this interface is bound to.
ifBasicAdminTable	1.3.6.1.4.1.8708.2.46.2.3.1		not-accessible	The if basic admin interface list.
UNS ifBasicAdminTxPort	1.3.6.1.4.1.8708.2.46.2.3.1.1.6	Unsigned32WithNA	read-create	The transmitting physical port that this interface is bound to.
ifBasicGeneral	1.3.6.1.4.1.8708.2.46.2.1
DAT ifBasicGeneralConfigLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.1	DateAndTime	read-only	The time when the configuration of the MIB was last changed.
ifBasicGeneralGroupV1	1.3.6.1.4.1.8708.2.46.1.1.1			The general objects.
DAT ifBasicGeneralIfBasicAdminConfigLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.7	DateAndTime	read-only	The time when the configuration of the table was last changed.
DAT ifBasicGeneralIfBasicAdminStateLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.8	DateAndTime	read-only	The time when the state and/or configuration of the table was last changed.
U32 ifBasicGeneralIfBasicAdminTableSize	1.3.6.1.4.1.8708.2.46.2.1.6	Unsigned32	read-only	Size of admin table
DAT ifBasicGeneralIfBasicIfConfigLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.4	DateAndTime	read-only	The time when the configuration of the table was last changed.
DAT ifBasicGeneralIfBasicIfStateLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.5	DateAndTime	read-only	The time when the state and/or configuration of the table was last changed.
U32 ifBasicGeneralIfBasicIfTableSize	1.3.6.1.4.1.8708.2.46.2.1.3	Unsigned32	read-only	Size of if table
DAT ifBasicGeneralIfBasicSignalConfigLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.10	DateAndTime	read-only	The time when the configuration of the table was last changed.
DAT ifBasicGeneralIfBasicSignalStateLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.11	DateAndTime	read-only	The time when the state and/or configuration of the table was last changed.
U32 ifBasicGeneralIfBasicSignalTableSize	1.3.6.1.4.1.8708.2.46.2.1.9	Unsigned32	read-only	Size of signal table
DAT ifBasicGeneralStateLastChangeTime	1.3.6.1.4.1.8708.2.46.2.1.2	DateAndTime	read-only	The time when the state of the MIB was last changed.
STR ifBasicIfAid	1.3.6.1.4.1.8708.2.46.2.2.1.1.6	DisplayString	read-only	The access identifier (AID) of the interface. The format is according to GR-833.
ifBasicIfEntry	1.3.6.1.4.1.8708.2.46.2.2.1.1		not-accessible	An entry in the ifBasic if list.
ifBasicIfGroupV1	1.3.6.1.4.1.8708.2.46.1.1.2			The ifBasic if objects (R20.0).
ifBasicIfGroupV2	1.3.6.1.4.1.8708.2.46.1.1.8			The ifBasic if objects (R26.0).
ifBasicIfGroupV3	1.3.6.1.4.1.8708.2.46.1.1.12			The ifBasic if objects (R28.0).
U32 ifBasicIfIndex	1.3.6.1.4.1.8708.2.46.2.2.1.1.1	Unsigned32	read-only	An index assigned to each entry.
ifBasicIfList	1.3.6.1.4.1.8708.2.46.2.2
STR ifBasicIfName	1.3.6.1.4.1.8708.2.46.2.2.1.1.2	MgmtNameString	read-only	The management name of the interface, for example 'client:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.
STR ifBasicIfPhysicalLocation	1.3.6.1.4.1.8708.2.46.2.2.1.1.7	DisplayString	read-only	The physical location of the if. The format is according to GR-833.
SIG ifBasicIfRxSignalStatus	1.3.6.1.4.1.8708.2.46.2.2.1.1.4	SignalStatusWithNA	read-only	The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
ifBasicIfTable	1.3.6.1.4.1.8708.2.46.2.2.1		not-accessible	The if basic if interface list.
SIG ifBasicIfTxSignalStatus	1.3.6.1.4.1.8708.2.46.2.2.1.1.3	SignalStatusWithNA	read-only	The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.
U32 ifBasicIfUpId	1.3.6.1.4.1.8708.2.46.2.2.1.1.5	Unsigned32	read-only	Identity in the UP for the interface. The upId is used internally between CU and TU to define a certain interface in the TU.
OPT ifBasicSignalActualOpticalLayerMapping	1.3.6.1.4.1.8708.2.46.2.4.1.1.15	OpticalLayerMappingType	read-only	The actual optical layer mapping.
FAU ifBasicSignalConfigurationMismatch	1.3.6.1.4.1.8708.2.46.2.4.1.1.14	FaultStatusWithNA	read-only	The inserted transceiver does not support the configuration of the optical layer mapping. alarm: A transceiver with other supported optical layer mapping than the requested mapping is inserted. ok: The transceiver with the non-requested optical layer mapping is removed, or the object is reconfigured.
CON ifBasicSignalConnectorType	1.3.6.1.4.1.8708.2.46.2.4.1.1.27	ConnectorType	read-only	The connector type.
SIG ifBasicSignalDirection	1.3.6.1.4.1.8708.2.46.2.4.1.1.17	SignalDirection	read-only	The direction in which this object is referred to. rx - In bound direction. (1) tx - out bound direction. (2) biDir - the interface has one connector used for both rx and tx. (3) txRx - the interface has two connectors one for tx and one for rx. (4) Not Available - the direction is not available.
ifBasicSignalEntry	1.3.6.1.4.1.8708.2.46.2.4.1.1		not-accessible	An entry in the ifBasic signal list.
ENA ifBasicSignalFacilityLoopback	1.3.6.1.4.1.8708.2.46.2.4.1.1.21	EnabledDisabledWithNA	read-write	The facility loopback setting. Rx is looped to Tx. The purpose of facility loopback is to test the line interface termination. disabled - Facility loopback is not set. This is the default setting. enabled - Facility loopback is set.
FAU ifBasicSignalFacilityLoopbackEnabled	1.3.6.1.4.1.8708.2.46.2.4.1.1.23	FaultStatusWithNA	read-only	Facility loopback is enabled. alarm: Facility loopback is enabled. ok: Facility loopback is disabled.
TIM ifBasicSignalFacilityLoopbackTimeout	1.3.6.1.4.1.8708.2.46.2.4.1.1.22	Time7200minNo0	read-write	Timeout for facility loopback to make sure connection to node is not lost if ppp link is broken. The unit is minutes. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU.
ENA ifBasicSignalFarEndLoopback	1.3.6.1.4.1.8708.2.46.2.4.1.1.6	EnabledDisabledWithNA	read-write	The far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) setting. disabled - Far end loopback is not set. This is the default setting. enabled - Far end loopback is set.
FAU ifBasicSignalFarEndLoopbackEnabled	1.3.6.1.4.1.8708.2.46.2.4.1.1.11	FaultStatusWithNA	read-only	Far end end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) is enabled. alarm: Far end loopback is enabled. ok: Far end loopback is disabled.
LAY ifBasicSignalFarEndLoopbackTerminatingLayer	1.3.6.1.4.1.8708.2.46.2.4.1.1.5	Layer	read-only	The layer where the far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interface) is done. This is coded in a bitmask
TIM ifBasicSignalFarEndLoopbackTimeout	1.3.6.1.4.1.8708.2.46.2.4.1.1.7	Time7200min	read-write	Timeout for far end loopback (a.k.a. terminal loopback for a client interface and facility loopback for a line interfac) to make sure connection to node is not lost if ppp link is broken. The unit is minutes. The value 0 is used in SNMP to indicate that the setting will last forever. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU.
INT ifBasicSignalFormatConfigurable	1.3.6.1.4.1.8708.2.46.2.4.1.1.18	INTEGER	read-only	This atttribute indicates if the interface is format configurable or not true - The interface is format configurable false - The interface is not format configurable
UNS ifBasicSignalFormatConfigurationSharedWithInterface	1.3.6.1.4.1.8708.2.46.2.4.1.1.19	Unsigned32WithNA	read-only	This attribute specifies whether this object instances shares the format configuration with another object instance. value == 0: it is not shared value != 0: it is shared with the interface object with index = value in IfBasicIfEntry If it is shared, it means that updating the format (and optionally speed) will affect the configuration of the other object instance
ifBasicSignalGroupV1	1.3.6.1.4.1.8708.2.46.1.1.4			The ifBasic signal objects (R20.0).
ifBasicSignalGroupV2	1.3.6.1.4.1.8708.2.46.1.1.5			The ifBasic signal objects (R22.0).
ifBasicSignalGroupV3	1.3.6.1.4.1.8708.2.46.1.1.6			The ifBasic signal objects (R23.0).
ifBasicSignalGroupV4	1.3.6.1.4.1.8708.2.46.1.1.7			The ifBasic signal objects (R26.0).
ifBasicSignalGroupV5	1.3.6.1.4.1.8708.2.46.1.1.9			The ifBasic signal objects (R26.1).
ifBasicSignalGroupV6	1.3.6.1.4.1.8708.2.46.1.1.10			The ifBasic signal objects (R28.0).
ifBasicSignalGroupV7	1.3.6.1.4.1.8708.2.46.1.1.14			The ifBasic signal objects (R31.0).
U32 ifBasicSignalIndex	1.3.6.1.4.1.8708.2.46.2.4.1.1.1	Unsigned32	read-only	An index assigned to each entry.
ifBasicSignalList	1.3.6.1.4.1.8708.2.46.2.4
STR ifBasicSignalName	1.3.6.1.4.1.8708.2.46.2.4.1.1.2	MgmtNameString	read-only	The management name of the interface, for example 'signal:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.
ENA ifBasicSignalNearEndLoopback	1.3.6.1.4.1.8708.2.46.2.4.1.1.9	EnabledDisabledWithNA	read-write	The near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) setting. disabled - Near end loopback is not set. This is the default setting. enabled - Near end loopback is set.
FAU ifBasicSignalNearEndLoopbackEnabled	1.3.6.1.4.1.8708.2.46.2.4.1.1.12	FaultStatusWithNA	read-only	Near end end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) is enabled. alarm: Near end loopback is enabled. ok: Near end loopback is disabled.
LAY ifBasicSignalNearEndLoopbackTerminatingLayer	1.3.6.1.4.1.8708.2.46.2.4.1.1.8	Layer	read-only	The layer where the near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) is done. This is coded in a bitmask.
TIM ifBasicSignalNearEndLoopbackTimeout	1.3.6.1.4.1.8708.2.46.2.4.1.1.10	Time7200min	read-write	Timeout for near end loopback (a.k.a. terminal loopback for a line interface and facility loopback for a client interface) to make sure connection to node is not lost if ppp link is broken. The unit is minutes. The value 0 is used in SNMP to indicate that the setting will last forever. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU.
OPT ifBasicSignalOpticalLayerMapping	1.3.6.1.4.1.8708.2.46.2.4.1.1.13	OpticalLayerMappingType	read-write	The optical layer mapping.
PHY ifBasicSignalPhysicalLayerMapping	1.3.6.1.4.1.8708.2.46.2.4.1.1.20	PhysicalLayerMappingType	read-write	The expected physical layer mapping.
SIG ifBasicSignalSignalFormat	1.3.6.1.4.1.8708.2.46.2.4.1.1.4	SignalFormat	read-write	The signal format.
C64 ifBasicSignalSignalStructure	1.3.6.1.4.1.8708.2.46.2.4.1.1.3	Counter64	read-only	The signal structure used. Bitfield 64 bit wide. For internal use. Bit 0 tells if mib ifBasicPhysicalTrx is loaded, bit 1 ifBasicOpticalTranssection, etc according to list below. Add new items last. ifPhysicalTrx ifOpticalTranssection ifOpticalChannel ifOpticalDigitalSignalRate ifEthPhysical ifEthMac ifOtnOdu ifOtnOtu ifOtnOpu ifOtnMonSm ifOtnMonPm ifOtnMonTcm ifOtnMonTrace ifSdhRs ifSdhMs ifSonetSection ifSonetLine ifPerfFec ifPerfAdmin ifPerfG826 ifPerfL2Error ifPerfL1 ifPerfL0 ifOpticalFec ifFcPhysical ifOtnTp ifOpticalTransportLaneCarrier ifOpticalTransportLaneCarrierGroup ifPerfL2Stat ifIwdmRs ifIwdmMS ifAmplifierAmplifier ifAmplifierModule ifAmplifierRaman ifAmplifierEdfa ifIwdmPath ifFhCpri ifFhObsai ifPhysicalCage ifEthRsFec ifPerfDelay ifOtdr
UNS ifBasicSignalSpeed	1.3.6.1.4.1.8708.2.46.2.4.1.1.16	Unsigned32WithNA	read-write	The expected signal bit rate in units of 10,000 bits (0.01 Mb) per second.
ifBasicSignalTable	1.3.6.1.4.1.8708.2.46.2.4.1		not-accessible	The if basic signal interface list.
ENA ifBasicSignalTerminalLoopback	1.3.6.1.4.1.8708.2.46.2.4.1.1.24	EnabledDisabledWithNA	read-write	The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux stage, or similar) and execute the loop close to the outgoing interface. disabled - Terminal loopback is not set. This is the default setting. enabled - Terminal loopback is set.
FAU ifBasicSignalTerminalLoopbackEnabled	1.3.6.1.4.1.8708.2.46.2.4.1.1.26	FaultStatusWithNA	read-only	Terminal loopback is enabled. alarm: Terminal loopback is enabled. ok: Terminal loopback is disabled.
TIM ifBasicSignalTerminalLoopbackTimeout	1.3.6.1.4.1.8708.2.46.2.4.1.1.25	Time7200minNo0	read-write	Timeout for terminal loopback to make sure connection to node is not lost if ppp link is broken. The unit is minutes. Note! This attribute is not saved in backup, meaning the loopback will be set to disabled when rebooting CU.
lumIfBasicBasicComplV1	1.3.6.1.4.1.8708.2.46.1.2.1			Basic implementation requirements for the ifBasic MIB. (R20.0)
lumIfBasicBasicComplV2	1.3.6.1.4.1.8708.2.46.1.2.2			Basic implementation requirements for the ifBasic MIB. (R22.0)
lumIfBasicBasicComplV3	1.3.6.1.4.1.8708.2.46.1.2.3			Basic implementation requirements for the ifBasic MIB. (R23.0)
lumIfBasicBasicComplV4	1.3.6.1.4.1.8708.2.46.1.2.4			Basic implementation requirements for the ifBasic MIB. (R26.0)
lumIfBasicBasicComplV5	1.3.6.1.4.1.8708.2.46.1.2.5			Basic implementation requirements for the ifBasic MIB. (R26.1)
lumIfBasicBasicComplV6	1.3.6.1.4.1.8708.2.46.1.2.6			Basic implementation requirements for the ifBasic MIB. (R28.0)
lumIfBasicBasicComplV7	1.3.6.1.4.1.8708.2.46.1.2.7			Basic implementation requirements for the ifBasic MIB. (R31.0)
lumIfBasicBasicComplV8	1.3.6.1.4.1.8708.2.46.1.2.8			Basic implementation requirements for the ifBasic MIB. (R32.0)
lumIfBasicCompl	1.3.6.1.4.1.8708.2.46.1.2
lumIfBasicConfs	1.3.6.1.4.1.8708.2.46.1
lumIfBasicGroups	1.3.6.1.4.1.8708.2.46.1.1
lumIfBasicMIBModule	1.3.6.1.4.1.8708.1.1.46			The MIB module for management of basic port objects. The tables contained in this MIB are: (1) The General group contains some general attributes as time stamps and tables sizes. (2) The If group contains information about the name of the port that is used in GUI. (2) The Admin group contains information and configuration for all interfaces available for If Basic Admin objects. (3) The Signal group contains information and configuration for all interfaces available for If Basic Signal objects.
lumIfBasicMIBObjects	1.3.6.1.4.1.8708.2.46.2

RFC description

Basic port management for Infinera optical transport interfaces including admin and signal configuration.

Start monitoring Infinera optical network element (basic port/interface objects) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LUM-IFBASIC-MIB

What Is LUM-IFBASIC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description