All MIBs › LUM-IFBASIC-MIB › ifBasicSignalTerminalLoopback
ifBasicSignalTerminalLoopback
Module: LUM-IFBASIC-MIB
OID (symbolic): LUM-IFBASIC-MIB::ifBasicSignalTerminalLoopback
OID (numeric): 1.3.6.1.4.1.8708.2.46.2.4.1.1.24
Node type: OBJECT-TYPE
Type: EnabledDisabledWithNA
Access: read-write
Description: The terminal loopback setting. Tx is looped to Rx. The purpose of a terminal loopback is to test the path through the equipment (a cross-connect, mux/demux stage, or similar) and execute the loop close to the outgoing interface.
disabled - Terminal loopback is not set. This is the default setting.
enabled - Terminal loopback is set.
What is ifBasicSignalTerminalLoopback?
This OID enables or disables a terminal loopback on this signal, which loops transmitted (Tx) traffic back into receive (Rx) to test the path through internal equipment such as a cross-connect or mux/demux stage, defaulting to disabled. A technician uses it to isolate whether a fault is in the equipment path itself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8708.2.46.2.4.1.1.24 snmpwalk -v2c -c public <target> LUM-IFBASIC-MIB::ifBasicSignalTerminalLoopback
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.8708.2.46.2.4.1.1.24.1 snmpget -v2c -c public <target> LUM-IFBASIC-MIB::ifBasicSignalTerminalLoopback.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.8708.2.46.2.4.1.1.24.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ifBasicSignalTerminalLoopback.1
Start monitoring Infinera optical network element (basic port/interface objects) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LUM-IFBASIC-MIB::ifBasicSignalTerminalLoopback OID value, configure state conditions and alerts, and monitor any Infinera optical network element (basic port/interface objects) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.8708 | lumentis | LUM-REG |
| 1.3.6.1.4.1.8708.2 | lumGeneric | LUM-REG |
| 1.3.6.1.4.1.8708.2.46 | lumIfBasicMIB | LUM-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.8708.2.46.2 | lumIfBasicMIBObjects | LUM-IFBASIC-MIB |
| 1.3.6.1.4.1.8708.2.46.2.4 | ifBasicSignalList | LUM-IFBASIC-MIB |
| 1.3.6.1.4.1.8708.2.46.2.4.1 | ifBasicSignalTable | LUM-IFBASIC-MIB |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1 | ifBasicSignalEntry | LUM-IFBASIC-MIB |
| 1.3.6.1.4.1.8708.2.46.2.4.1.1.24 | ifBasicSignalTerminalLoopback | LUM-IFBASIC-MIB |