LPO-ROUVIERE-MIB

Description: Enterprise MIB for LPO Rouviere equipment providing device-specific management objects for network or power distribution monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

LPO-ROUVIERE-MIB is a small enterprise MIB for LPO Rouviere equipment, appearing to be a remote-control/monitoring module for a device with discrete digital outputs (LEDs), inputs/switches, and relay-style coils, consistent with a remote power/signal control unit rather than a traditional networking device. It exposes simple discrete status/control objects: LED indicator states (led1-led3), switch/input states (sw1-sw3), and coil/relay outputs (coil1-coil3), organized under management objects and conformance branches, with what appears to be tutorial/example object groups (lprSnmpTutorial) included in the module. Its monitoring and control value is at the level of simple hardware I/O status: an operator can read switch/input states to detect physical events (e.g., a door or button) and read or set LED and coil states to control indicators or relays remotely, functioning as basic remote hardware monitoring/control rather than software or performance monitoring. It has no apparent dependency on other standard MIBs, being a small self-contained enterprise module. It is typically deployed in remote SNMP-controlled I/O or signaling equipment, such as small remote control/telemetry units used in power distribution or facility monitoring. Engineers can download the LPO-ROUVIERE-MIB file directly to load it into their MIB browser.

An operator would poll sw1 through sw3 to detect the current state of physical switches/inputs wired to the device, and use SNMP SET on coil1 through coil3 to actuate relays remotely, checking led1 through led3 to confirm the resulting indicator state. An unexpected sw state change could indicate a physical alarm condition (e.g., a door contact or intrusion sensor) wired to that input.

SNMP remote control MIB for LPO Rouviere technical school devices and GPIO control.