All MIBs › LPO-ROUVIERE-MIB › led1
led1
Module: LPO-ROUVIERE-MIB
OID (symbolic): LPO-ROUVIERE-MIB::led1
OID (numeric): 1.3.6.1.4.1.52900.1.1.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Led 1 connected to the GPIO.
What is led1?
This controls the on/off state of LED 1, which is wired to a GPIO pin on this small monitoring and control device. Admins use it to remotely turn that specific LED indicator on or off, useful for visual status signaling or simple remote control demonstrations. Setting led1 to 1 turns that LED on, while setting it back to 0 turns it off.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52900.1.1.1.1 snmpwalk -v2c -c public <target> LPO-ROUVIERE-MIB::led1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52900.1.1.1.1.1 snmpget -v2c -c public <target> LPO-ROUVIERE-MIB::led1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52900.1.1.1.1.1 i <value>
Start monitoring LPO Rouviere remote I/O / relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LPO-ROUVIERE-MIB::led1 OID value, configure state conditions and alerts, and monitor any LPO Rouviere remote I/O / relay control unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52900 | lpoRouviereMIB | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1 | lprMIBObjects | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.1 | lprSnmpTutorial | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.1.1 | lprSnmpTutorialLeds | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.1.1.1 | led1 | LPO-ROUVIERE-MIB |