All MIBs › LPO-ROUVIERE-MIB › led3
led3
Module: LPO-ROUVIERE-MIB
OID (symbolic): LPO-ROUVIERE-MIB::led3
OID (numeric): 1.3.6.1.4.1.52900.1.1.1.3
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Led 3 connected to the GPIO.
What is led3?
This controls the on/off state of LED 3, which is wired to a GPIO pin on this small monitoring and control device. Admins use it to remotely turn that specific LED indicator on or off, independent of the device's other LEDs. Setting led3 to 1 turns that LED on, while setting it back to 0 turns it off.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52900.1.1.1.3 snmpwalk -v2c -c public <target> LPO-ROUVIERE-MIB::led3
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52900.1.1.1.3.1 snmpget -v2c -c public <target> LPO-ROUVIERE-MIB::led3.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52900.1.1.1.3.1 i <value>
Start monitoring LPO Rouviere remote I/O / relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LPO-ROUVIERE-MIB::led3 OID value, configure state conditions and alerts, and monitor any LPO Rouviere remote I/O / relay control unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52900 | lpoRouviereMIB | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1 | lprMIBObjects | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.1 | lprSnmpTutorial | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.1.1 | lprSnmpTutorialLeds | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.1.1.3 | led3 | LPO-ROUVIERE-MIB |