LPO-ROUVIERE-MIB DEFINITIONS ::= BEGIN

-- MIB of the LPO Rouviere (Technical High School, Toulon, France)

IMPORTS
    enterprises, Integer32, MODULE-IDENTITY, OBJECT-TYPE
        FROM SNMPv2-SMI;

--
-- A brief description and update information about this mib.
--
lpoRouviereMIB MODULE-IDENTITY
    LAST-UPDATED "201810300000Z"            -- 30 October 2018, midnight
    ORGANIZATION "LPO Rouviere"
    CONTACT-INFO "postal:   rue Henri Sainte-Claire Deville
                            83100 Toulon
                            France

                  email:    0831616f@ac-nice.fr
                 "
    DESCRIPTION  "MIB for remote control by SNMP.
                 "
    ::= { enterprises 52900 }

-- Define typical mib nodes, like where the objects are going to lie.
-- we'll prefix everything in this mib with lpr (LPO Rouviere)
lprMIBObjects     OBJECT IDENTIFIER ::= { lpoRouviereMIB 1 }
lprMIBConformance OBJECT IDENTIFIER ::= { lpoRouviereMIB 2 }


-- Define the list of projects
lprSnmpTutorial   OBJECT IDENTIFIER ::= { lprMIBObjects 1 }
lprPointCast   OBJECT IDENTIFIER ::= { lprMIBObjects 2 }

-- lprSnmpTutorial Module
lprSnmpTutorialLeds   OBJECT IDENTIFIER ::= { lprSnmpTutorial 1 }
lprSnmpTutorialButtons   OBJECT IDENTIFIER ::= { lprSnmpTutorial 2 }

--
-- 3 LEDs connected to the GPIO
--

--
-- LED 0 connected to GPIO
--
led1            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
  "Led 1 connected to the GPIO."
    DEFVAL { 0 }
    ::= { lprSnmpTutorialLeds 1 }

--
-- LED 1 connected to GPIO
--
led2            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
  "Led 2 connected to the GPIO."
    DEFVAL { 0 }
    ::= { lprSnmpTutorialLeds 2 }

--
-- LED 2 connected to GPIO
--
led3            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
  "Led 3 connected to the GPIO."
    DEFVAL { 0 }
    ::= { lprSnmpTutorialLeds 3 }

--
-- 3 buttons connected to the GPIO
--

--
-- BUTTON 1 connected to GPIO
--
sw1            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
  "Button 1 connected to the GPIO."
    DEFVAL { 0 }
    ::= { lprSnmpTutorialButtons 1 }

--
-- BUTTON 2 connected to GPIO
--
sw2            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
  "Button 2 connected to the GPIO."
    DEFVAL { 0 }
    ::= { lprSnmpTutorialButtons 2 }

--
-- BUTTON 3 connected to GPIO
--
sw3            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
  "Button 3 connected to the GPIO."
    DEFVAL { 0 }
    ::= { lprSnmpTutorialButtons 3 }

-- lprPointCast Module
lprPointCastCoils   OBJECT IDENTIFIER ::= { lprPointCast 1 }
lprPointCastDiscreteInputs   OBJECT IDENTIFIER ::= { lprPointCast 2 }
lprPointCastInputRegisters   OBJECT IDENTIFIER ::= { lprPointCast 3 }

coil1            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
  "Coil that drives the first device."
    DEFVAL { 0 }
    ::= { lprPointCastCoils 1 }

coil2            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
  "Coil that drives the second device."
    DEFVAL { 0 }
    ::= { lprPointCastCoils 2 }

coil3            OBJECT-TYPE
    SYNTAX      Integer32 (0..1)
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
  "Coil that drives the third device."
    DEFVAL { 0 }
    ::= { lprPointCastCoils 3 }

-- END:  Don't forget this!
END