BayNetworks-BPKG-MIB

All MIBs › BayNetworks-BPKG-MIB

Category: Device Management, Vendor: Avaya

Description: Manages Bay Networks (Nortel) software package installation and version tracking on router platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BayNetworks-BPKG-MIB?

BayNetworks-BPKG-MIB is a Bay Networks (later Nortel) enterprise MIB for managing software package installation and version tracking on Bay/Nortel router and switch platforms. No module description or sample objects were available in the source, but based on its name and vendor context it would expose an inventory-style table of installed software packages/images along with their version identifiers and installation status. Its monitoring relevance would be primarily software-status oriented: confirming which software packages and versions are currently installed and active on a device, useful for verifying a firmware/feature-package upgrade completed successfully across a fleet. It would sit within the broader Bay Networks/Nortel enterprise MIB tree and depend on that vendor's general chassis/module identification conventions for indexing packages to hardware slots. It was typically deployed on legacy Bay Networks/Nortel routing and switching platforms in enterprise and carrier networks during software upgrade and inventory audits. Engineers can download the BayNetworks-BPKG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BayNetworks-BPKG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Bay Networks/Nortel router and switch platform

Monitoring Examples

No sample objects were provided for this module, so specific object names cannot be cited, but based on its stated purpose an administrator would expect to poll a package/version inventory table to confirm the installed software package version matches the intended release after an upgrade on Bay Networks/Nortel equipment.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfBacPktGenGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfBacPktGenBase	1.3.6.1.4.1.18.3.3.2.4.1.1
INT wfBacPktGenDelete	1.3.6.1.4.1.18.3.3.2.4.1.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen.
INT wfBacPktGenDisable	1.3.6.1.4.1.18.3.3.2.4.1.1.2	INTEGER	read-write	Enable/Disable parameter. Default is disabled. Users perform a set operation on this object in order to enable/disable BAC PktGen.
INT wfBacPktGenState	1.3.6.1.4.1.18.3.3.2.4.1.1.3	INTEGER	read-only	The current state of the entire BAC PktGen: up - BAC PktGen is sending and receiving frames; down - BAC PktGen is disabled; init - BAC PktGen is initializing; notpresent - BAC PktGen is not present.
CTR wfBacPktGenTxTabSum	1.3.6.1.4.1.18.3.3.2.4.1.1.4	Counter	read-only	Total number of TXTAB records added to CXP's.
CTR wfBacPktGenRxTabSum	1.3.6.1.4.1.18.3.3.2.4.1.1.5	Counter	read-only	Total number of RXTAB records added to CXP's.
wfBacPktGenCxpTable	1.3.6.1.4.1.18.3.3.2.4.1.2		not-accessible	The BAC PktGen CXP table contains relevant information concerning packet generation on each CXP. Note that, the processing of PktGen CXP entries supercedes that of wfBacPktGenCxpGlobal MIB record.
wfBacPktGenCxpEntry	1.3.6.1.4.1.18.3.3.2.4.1.2.1		not-accessible	Information concerning packet generation on the CXP.
INT wfBacPktGenCxpDelete	1.3.6.1.4.1.18.3.3.2.4.1.2.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen CXP table entry.
INT wfBacPktGenCxpId	1.3.6.1.4.1.18.3.3.2.4.1.2.1.2	INTEGER	read-only	Uniquely identifies the CXP from which test packets are generated. Currently, the CXP is identified by its slot number, which must be between 6 and 8.
CTR wfBacPktGenStreamMask	1.3.6.1.4.1.18.3.3.2.4.1.2.1.3	Counter	read-write	Bit mask for generating test packets on the CXP streams 1-31. The least significant bit is ignored. The second least significant bit represents stream 1, the next least significant bit represents stream 2, and so forth. The most significant bit represents stream 31.
wfBacPktGenPktSeed	1.3.6.1.4.1.18.3.3.2.4.1.3
INT wfBacPktGenSeedPkts	1.3.6.1.4.1.18.3.3.2.4.1.3.1	INTEGER	read-write	Seed/Unseed packet parameter. Default is unseedpackets. Users perform a set operation on this object in order to seed/unseed test packets.
INT wfBacPktGenPktSeedState	1.3.6.1.4.1.18.3.3.2.4.1.3.2	INTEGER	read-only	Based on the set operation performed on the Seed/Unseed packet parameter, this object reflects the status of the operation. Default is idle. This object goes to the operationstarted state as soon as the BAC PktGen application detects the set operation on the Seed/Unseed parameter. The object remains in this state until the operation is completed, and the appropriate state is registered.
wfBacPktGenCxpGlobal	1.3.6.1.4.1.18.3.3.2.4.1.4
INT wfBacPktGenCxpGlobalDelete	1.3.6.1.4.1.18.3.3.2.4.1.4.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen CXP Global record. Note that, the PktGen Global record is processed as long as no wfBacPktGenCxpEntry MIB records exist. When one or more wfBacPktGenCxpEntry MIB records are configured, the PktGen CXP Global record is ignored and its processing is disabled.
CTR wfBacPktGenGlobalStreamMask	1.3.6.1.4.1.18.3.3.2.4.1.4.2	Counter	read-write	Bit mask for generating test packets on all CXP streams 1-31. The least significant bit is ignored. The second least significant bit represents stream 1, the next least significant bit represents stream 2, and so forth. The most significant bit represents stream 31.
INT wfBacPktGenGlobalRecActive	1.3.6.1.4.1.18.3.3.2.4.1.4.3	INTEGER	read-only	Indicates if the processing of this MIB record is active. It is active only when NO wfBacPktGenCxpEntry MIB record is configured.
wfBacPktGenCctTable	1.3.6.1.4.1.18.3.3.2.4.1.5		not-accessible	The BAC PktGen Circuit table.
wfBacPktGenCctEntry	1.3.6.1.4.1.18.3.3.2.4.1.5.1		not-accessible	Information concerning a BAC PktGen circuit table entry.
INT wfBacPktGenCctDelete	1.3.6.1.4.1.18.3.3.2.4.1.5.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete BAC PktGen Circuit table entry.
INT wfBacPktGenCctNumber	1.3.6.1.4.1.18.3.3.2.4.1.5.1.2	INTEGER	read-only	BAC PktGen circuit number.
INT wfBacPktGenCctState	1.3.6.1.4.1.18.3.3.2.4.1.5.1.3	INTEGER	read-only	The current state of the BAC PktGen circuit: up - The circuit is up; down - The circuit is down; init - The circuit is initializing; notpresent - The circuit is not present.
STR wfBacPktGenCctName	1.3.6.1.4.1.18.3.3.2.4.1.5.1.4	DisplayString	read-write	BAC PktGen circuit name.
wfBacPktGenPktFile	1.3.6.1.4.1.18.3.3.2.4.1.6
INT wfBacPktGenPktFileAppend	1.3.6.1.4.1.18.3.3.2.4.1.6.1	INTEGER	read-only	Append disable/enable parameter. Default is to release previous table contents instead of appending to previously processed pkt files. This feature is currently not supported.
STR wfBacPktGenPktFileName	1.3.6.1.4.1.18.3.3.2.4.1.6.2	DisplayString	read-write	The user-defined name of the pktfile to process.
wfBacPktGenPktGrpTable	1.3.6.1.4.1.18.3.3.2.4.1.7		not-accessible	The BAC PktGen packet group table.
wfBacPktGenPktGrpEntry	1.3.6.1.4.1.18.3.3.2.4.1.7.1		not-accessible	Information concerning a BAC PktGen packet group table entry.
INT wfBacPktGenPktGrpNumber	1.3.6.1.4.1.18.3.3.2.4.1.7.1.1	INTEGER	read-only	Uniquely identifies the packet group number.
INT wfBacPktGenPktGrpDelay1	1.3.6.1.4.1.18.3.3.2.4.1.7.1.2	INTEGER	read-write	Delay parameter 1 for this packet group.
INT wfBacPktGenPktGrpDelay2	1.3.6.1.4.1.18.3.3.2.4.1.7.1.3	INTEGER	read-write	Delay parameter 2 for this packet group.
INT wfBacPktGenPktGrpDelay3	1.3.6.1.4.1.18.3.3.2.4.1.7.1.4	INTEGER	read-write	Delay parameter 3 for this packet group.
INT wfBacPktGenPktGrpDelay4	1.3.6.1.4.1.18.3.3.2.4.1.7.1.5	INTEGER	read-write	Delay parameter 4 for this packet group.
INT wfBacPktGenPktGrpCount1	1.3.6.1.4.1.18.3.3.2.4.1.7.1.6	INTEGER	read-write	Count parameter 1 for this packet group.
INT wfBacPktGenPktGrpCount2	1.3.6.1.4.1.18.3.3.2.4.1.7.1.7	INTEGER	read-write	Count parameter 2 for this packet group.
INT wfBacPktGenPktGrpCount3	1.3.6.1.4.1.18.3.3.2.4.1.7.1.8	INTEGER	read-write	Count parameter 3 for this packet group.
INT wfBacPktGenPktGrpCount4	1.3.6.1.4.1.18.3.3.2.4.1.7.1.9	INTEGER	read-write	Count parameter 4 for this packet group.
CTR wfBacPktGenPktSeedSum	1.3.6.1.4.1.18.3.3.2.4.1.7.1.10	Counter	read-only	Total number of packet seeds that belong to this packet group.
INT wfBacPktGenPktGrpCxp	1.3.6.1.4.1.18.3.3.2.4.1.7.1.11	INTEGER	read-only	The eligible CXP slot number on which this packet group can be thrown.
wfBacPktGenStrmCtrlTable	1.3.6.1.4.1.18.3.3.2.4.1.8		not-accessible	The BAC PktGen stream control table.
wfBacPktGenStrmCtrlEntry	1.3.6.1.4.1.18.3.3.2.4.1.8.1		not-accessible	Information concerning a BAC PktGen stream control table entry.
INT wfBacPktGenStrmNumber	1.3.6.1.4.1.18.3.3.2.4.1.8.1.1	INTEGER	read-only	Uniquely identifies the PktGen stream number on each CXP.
INT wfBacPktGenStrmCxp	1.3.6.1.4.1.18.3.3.2.4.1.8.1.2	INTEGER	read-only	Uniquely identifies the CXP.
INT wfBacPktGenStrmState	1.3.6.1.4.1.18.3.3.2.4.1.8.1.3	INTEGER	read-only	The current state of this PktGen stream: pktgen - Stream is transmitting test packets; killed - Stream is being killed; notpresent - Stream is not present.
INT wfBacPktGenSetStrmPktGrp	1.3.6.1.4.1.18.3.3.2.4.1.8.1.4	INTEGER	read-write	Set the packet group to be thrown by this PktGen stream.
INT wfBacPktGenStrmPktGrp	1.3.6.1.4.1.18.3.3.2.4.1.8.1.5	INTEGER	read-only	The packet group which will be thrown by this PktGen stream.

RFC description

Bay Networks packet generator state, transmission and reception statistics for BAC.

Start monitoring Bay Networks/Nortel (Wellfleet BayRS) routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BayNetworks-BPKG-MIB

What Is BayNetworks-BPKG-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description