All MIBs › LPO-ROUVIERE-MIB › coil2
coil2
Module: LPO-ROUVIERE-MIB
OID (symbolic): LPO-ROUVIERE-MIB::coil2
OID (numeric): 1.3.6.1.4.1.52900.1.2.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Coil that drives the second device.
What is coil2?
This controls a relay coil output that drives a second connected external device. Admins use it to remotely switch that external device on or off, independent of the device's other relay outputs. Setting coil2 to 1 energizes the second relay, turning on whatever external device is connected to that output.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52900.1.2.1.2 snmpwalk -v2c -c public <target> LPO-ROUVIERE-MIB::coil2
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52900.1.2.1.2.1 snmpget -v2c -c public <target> LPO-ROUVIERE-MIB::coil2.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52900.1.2.1.2.1 i <value>
Start monitoring LPO Rouviere remote I/O / relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LPO-ROUVIERE-MIB::coil2 OID value, configure state conditions and alerts, and monitor any LPO Rouviere remote I/O / relay control unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52900 | lpoRouviereMIB | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1 | lprMIBObjects | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.2 | lprPointCast | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.2.1 | lprPointCastCoils | LPO-ROUVIERE-MIB |
| 1.3.6.1.4.1.52900.1.2.1.2 | coil2 | LPO-ROUVIERE-MIB |