HUAWEI-CONFIG-MAN-MIB

All MIBs › HUAWEI-CONFIG-MAN-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-04-27

Category: Device Management, Domain: Network Management, Vendor: Huawei

Description: Huawei configuration management MIB for managing device configuration files, configuration save/load operations, and change history tracking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-CONFIG-MAN-MIB?

HUAWEI-CONFIG-MAN-MIB is a Huawei-proprietary configuration-management MIB used across the Huawei router and switch product lines to represent the model of configuration data held on the device and its peripherals. It exposes objects for querying and manipulating configuration files, triggering save/load/backup operations, and reading a change-history log of configuration modifications made on the system. Its primary monitoring value is tracking configuration-management software status: whether a save or load operation completed successfully, what the current active configuration state is, and a historical audit trail of who or what changed device configuration and when, which is a software/process health signal rather than a hardware sensor. The module description notes it has no built-in constraints, implying it is meant to be paired with other Huawei management MIBs (and standard SNMP SET/GET semantics) to actually drive configuration changes. It is typically deployed wherever an NMS needs to remotely back up, restore, or audit configuration changes on Huawei network devices, such as centralized configuration-compliance or change-management systems, and a HUAWEI-CONFIG-MAN-MIB download is available for administrators who need to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-CONFIG-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers
Huawei switches

Monitoring Examples

An NMS would poll the configuration change-log objects to retrieve a history of configuration modifications and correlate them with a device outage or unexpected behavior, or trigger a configuration save/backup operation and then check its completion status object. No sample object names were provided for this module, so specific table names cannot be cited, but the module description explicitly confirms change-log query and configuration save/load operations as the exposed functionality. A failed or stalled save/load status would indicate a configuration-management operation did not complete as expected.

What Can Be Monitored

configuration save/load operation status
configuration change history log
active configuration state
peripheral device configuration data

Imported Objects

From HUAWEI-MIB

huaweiUtility

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hwCfgLogDeletedEntries OID:

Select a Huawei router or switch (configuration save/load/backup management) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwCfgLogDeletedEntries into the Find box to locate it in the OID tree, then select it and click OK. The total number of rows deleted from hwCfgLogTable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
NTF hwCfgB2SOperate	1.3.6.1.4.1.2011.6.10.2.6			When the system begin to backup current configuration to servers, this trap will generate.
NTF hwCfgB2STransferFail	1.3.6.1.4.1.2011.6.10.2.5			When the system failed to backup current configuration to specified server, this trap will generate to indicates the details information.
hwCfgBackup2ServerEntry	1.3.6.1.4.1.2011.6.10.1.3.7.1		not-accessible	An operate request entry.
hwCfgBackup2ServerTable	1.3.6.1.4.1.2011.6.10.1.3.7		not-accessible	A table of config-operation requests.
I32 hwCfgBackupIndex	1.3.6.1.4.1.2011.6.10.1.3.7.1.1	Integer32	accessible-for-notify	The unique index value of a row in this table.
OCT hwCfgBackupPassword	1.3.6.1.4.1.2011.6.10.1.3.7.1.5	OCTET STRING	read-create	The password can be plain text or encripted text. If the password is plain text, its length should range from 0 to 255. If the password is in cipher text, its length is 24 or from 32 to 392. When get the value of the field, the device will return a zero-length string. When set the field, its value cannot be a string that contains no character.
INT hwCfgBackupProtocol	1.3.6.1.4.1.2011.6.10.1.3.7.1.3	INTEGER	read-create	The protocol used to backup configuration to server automatically.
STR hwCfgBackupResult	1.3.6.1.4.1.2011.6.10.1.3.7.1.8	DisplayString	read-only	This object is only for trap information, and does not support get and get-next operation.
ROW hwCfgBackupRowStatus	1.3.6.1.4.1.2011.6.10.1.3.7.1.7	RowStatus	read-create	The status of this table entry.
IP hwCfgBackupServerIp	1.3.6.1.4.1.2011.6.10.1.3.7.1.2	IpAddress	read-create	The ip address of the FTP/TFTP/SFTP server to which to the device backup configuration automatically. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted.
STR hwCfgBackupServerPath	1.3.6.1.4.1.2011.6.10.1.3.7.1.6	DisplayString	read-create	The length of the path in the backup server should range from 1 to 64.
STR hwCfgBackupUser	1.3.6.1.4.1.2011.6.10.1.3.7.1.4	DisplayString	read-create	The length of the user name should range from 1 to 64.
STR hwCfgBackupVpnInstance	1.3.6.1.4.1.2011.6.10.1.3.7.1.9	DisplayString	read-create	The VPN instance name that through which to transfer the file.
NTF hwCfgInconsistent	1.3.6.1.4.1.2011.6.10.2.3			When the system automatically detects that configurations of the AMB and the SMB are inconsistent, the trap is generated.
NTF hwCfgInconsistentResume	1.3.6.1.4.1.2011.6.10.2.4			When the system automatically detects that configurations of the AMB and the SMB change from inconsistent to consistent, the trap is generated.
hwCfgLock	1.3.6.1.4.1.2011.6.10.1.4
hwCfgLog	1.3.6.1.4.1.2011.6.10.1.1
STR hwCfgLogCfgBaselineTime	1.3.6.1.4.1.2011.6.10.1.1.7.1.16	DisplayString	read-only	Specifies the time of system confiuration was baseline.
IP hwCfgLogCmdSrcAddress	1.3.6.1.4.1.2011.6.10.1.1.7.1.10	IpAddress	read-only	The address from which a request comes when the value of hwCfgLogSrcCmd is 'snmp(2)'. The ip address of the remote system connected when the value of hwCfgLogTerminalType is 'virtual'. Otherwise, the value of the object is 0.0.0.0.
U32 hwCfgLogConfigChangeId	1.3.6.1.4.1.2011.6.10.1.1.7.1.15	Unsigned32	read-only	This is the sequence ID of configuration. When configuration is changed, ID is added.
C32 hwCfgLogDeletedEntriesEx	1.3.6.1.4.1.2011.6.10.1.1.5	Counter32	read-only	The total number of rows deleted from hwCfgLogTable.
INT hwCfgLogDesData	1.3.6.1.4.1.2011.6.10.1.1.7.1.5	INTEGER	read-only	The configuration data destination for the event. unknown unknown running operational data alive commandSource the command source itself startup what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
hwCfgLogEntry	1.3.6.1.4.1.2011.6.10.1.1.7.1		not-accessible	Information about a configuration log in this system.
STR hwCfgLogFile	1.3.6.1.4.1.2011.6.10.1.1.7.1.14	DisplayString	read-only	The remote file name when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string.
I32 hwCfgLogIndex	1.3.6.1.4.1.2011.6.10.1.1.7.1.1	Integer32	not-accessible	The index of hwCfgLogTable, which is a incremental integer. The maximum value of the node is 2147483647.The table should wrap the value to 1 and flush all the existing entries when the maximum value is reached.
I32 hwCfgLogLimitedEntries	1.3.6.1.4.1.2011.6.10.1.1.4	Integer32	read-only	The object shows the maximum number of rows in hwCfgLogTable. The value supported by the system is 10.
IP hwCfgLogServerAddress	1.3.6.1.4.1.2011.6.10.1.1.7.1.13	IpAddress	read-only	The remote server address when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is 0.0.0.0.
INT hwCfgLogSrcCmd	1.3.6.1.4.1.2011.6.10.1.1.7.1.3	INTEGER	read-only	Specifies the source command resulting in the log. Currently we provide the types of source: 1.cmdLine(1):configuration log instigated by command line. 2.snmp(2):configuration log instigated by snmp. 3.other(3):configuration log instigated by other source unknown.
INT hwCfgLogSrcData	1.3.6.1.4.1.2011.6.10.1.1.7.1.4	INTEGER	read-only	The configuration data source for the event. erase erasing destination running operational data alive commandSource the command source itself startup what the system will use next reboot local local NVRAM or flash netFtp FTP network transfer hotPlugging board is inserted or pulled out on line
hwCfgLogTable	1.3.6.1.4.1.2011.6.10.1.1.7		not-accessible	A table of configuration log on this device.
STR hwCfgLogTerminalLocation	1.3.6.1.4.1.2011.6.10.1.1.7.1.9	DisplayString	read-only	The available location of the terminal when hwCfgLogSrcCmd is 'cmdLine'. Otherwise, it is a zero length string.
I32 hwCfgLogTerminalNum	1.3.6.1.4.1.2011.6.10.1.1.7.1.8	Integer32	read-only	Specifies the terminal number. If hwCfgLogSrcCmd variable is not 'cmdLine'(such as 'snmp'or 'other'), the value of the object is '-1'. If hwCfgLogSrcCmd variable is 'cmdLine', the value '-1' means that it is not the active terminal user.
INT hwCfgLogTerminalType	1.3.6.1.4.1.2011.6.10.1.1.7.1.6	INTEGER	read-only	Specifies the terminal type. If hwCfgLogSrcData is not 'cmdLine', the value of the object is 'notApplicable'. The value list: notApplicable(1): no meaning at this time. unknown(2): unknown terminal type. console(3): terminal(4) virtual(5) auxiliary(6)
STR hwCfgLogTerminalUser	1.3.6.1.4.1.2011.6.10.1.1.7.1.7	DisplayString	read-only	The name of a logging user which is available when hwCfgLogSrcCmd is 'cmdLine'. When hwCfgLogTerminalType is 'virtual' and user login in authentication, the object will be the name of the user. Otherwise, it is a zero length string.
TIK hwCfgLogTime	1.3.6.1.4.1.2011.6.10.1.1.7.1.2	TimeTicks	read-only	Specifies the sysUpTime when the configuration log was generated.
STR hwCfgLogUserName	1.3.6.1.4.1.2011.6.10.1.1.7.1.12	DisplayString	read-only	The user name used when hwCfgLogSrcData or hwCfgLogDesData has the value of 'netFtp'. Otherwise, the value of the object is a zero length string.
STR hwCfgLogVirHost	1.3.6.1.4.1.2011.6.10.1.1.7.1.11	DisplayString	read-only	The available host name of the remote system connected if hwCfgLogTerminalType has the value of 'virtual'. Otherwise, the value of the object is a zero length string.
T/F hwCfgLogWantBackup	1.3.6.1.4.1.2011.6.10.1.1.6	TruthValue	read-write	Decides whether or not to backup the configuration log information. If the value is true, the data of configuration log on the master will be sent to slave. Otherwise the data of log will be lost when master switches to slave. Default value is true.
NTF hwCfgManEventlog	1.3.6.1.4.1.2011.6.10.2.1			If the system configuration is changed, a notification is generated.
hwCfgManLogGroup	1.3.6.1.4.1.2011.6.10.3.2.1			A collection of objects configuration log group.
hwCfgManNotificationGroup	1.3.6.1.4.1.2011.6.10.3.2.3			Collection of notification objects.
TIK hwCfgModuleChangeTime	1.3.6.1.4.1.2011.6.10.1.2.6.1.11	TimeTicks	read-only	Time on changes of the module.
hwCfgModuleChangeTimeEntry	1.3.6.1.4.1.2011.6.10.1.2.6.1		not-accessible	Time entity on changes of the configuration module.
hwCfgModuleChangeTimeTable	1.3.6.1.4.1.2011.6.10.1.2.6		not-accessible	Table on changes of configuration.
I32 hwCfgModuleId	1.3.6.1.4.1.2011.6.10.1.2.6.1.1	Integer32	not-accessible	Module index. It is an integer without enumeration. This is because the enumeration may expose the classification methods of modules. In addition, this field is uncertain in the beginning stage and once the value is determined, it cannot be modified.
hwCfgOperate	1.3.6.1.4.1.2011.6.10.1.2
INT hwCfgOperateCompareConfig	1.3.6.1.4.1.2011.6.10.1.2.7	INTEGER	read-write	compare configuration of the files
NTF hwCfgOperateCompletion	1.3.6.1.4.1.2011.6.10.2.2			When a configuration operation has been done, a notification may be generated.
T/F hwCfgOperateEndNotificationSwitch	1.3.6.1.4.1.2011.6.10.1.2.4.1.8	TruthValue	read-create	Specifies whether or not a notification should be issued on the completion of the operation.
TIK hwCfgOperateEndTime	1.3.6.1.4.1.2011.6.10.1.2.5.1.6	TimeTicks	read-only	The value of sysUpTime when the configuration operation is finished.
hwCfgOperateEntry	1.3.6.1.4.1.2011.6.10.1.2.4.1		not-accessible	An operate request entry.
I32 hwCfgOperateEntryAgeOutTime	1.3.6.1.4.1.2011.6.10.1.2.2	Integer32	read-write	This value indicates the primary reference time of the hwCfgOperateEntry saved in the hwCfgOperateTable.This value is not valid if there is extra space in the hwCfgOperateTable, that is, the hwCfgOperateEntry is not deleted periodically. If there is no space in the hwCfgOperateTable to save a new hwCfgOperateEntry, the expired hwCfgOperateEntry that is unactivated or the hwCfgOperateEntry that is processed may be deleted. Default value is 5.
STR hwCfgOperateErrorReason	1.3.6.1.4.1.2011.6.10.1.2.5.1.8	DisplayString	read-only	The failure reason of configuration operation.
STR hwCfgOperateFileName	1.3.6.1.4.1.2011.6.10.1.2.4.1.4	DisplayString	read-create	When the object of hwCfgOperateType has the value of net2Startup, net2Running or running2Net, the value must be specified. The file name may include the path if applicable. If the value of hwCfgOperateType is net2Startup or net2Running, this node specifies the source file name of transfers. If the value of hwCfgOperateType is running2Net, this node specifies the destination file name of transfers. If the value of hwCfgOperateType is running2Startup, this node specifies the saved file name of current running configuration. When hwCfgOperateType has the value of startup2Net or startup2Running, the object may not be created instead of using the file name of startup configuration file.
I32 hwCfgOperateGlobalEntryLimit	1.3.6.1.4.1.2011.6.10.1.2.1	Integer32	read-only	The maximum number of copy entries that may be held in hwCfgOperateTable. A particular setting does not guarantee that much data can be held.
hwCfgOperateGroup	1.3.6.1.4.1.2011.6.10.3.2.2			A group of configuration operation.
I32 hwCfgOperateIndex	1.3.6.1.4.1.2011.6.10.1.2.4.1.1	Integer32	not-accessible	The unique index value of a row in this table.
hwCfgOperateLevelUsersEntry	1.3.6.1.4.1.2011.6.10.1.4.2.1		not-accessible	Users entity on lock or level of the configuration module.
STR hwCfgOperateLevelUsersIPAddr	1.3.6.1.4.1.2011.6.10.1.4.2.1.5	DisplayString	read-only	IP Address of users who have the configuration level or have locked the configuration.
STR hwCfgOperateLevelUsersLastCfgTime	1.3.6.1.4.1.2011.6.10.1.4.2.1.6	DisplayString	read-only	The last configurate Time of users who have the configuration level or have locked the configuration.
STR hwCfgOperateLevelUsersLockedTime	1.3.6.1.4.1.2011.6.10.1.4.2.1.4	DisplayString	read-only	LoginTime of users who have the configuration level or have locked the configuration.
STR hwCfgOperateLevelUsersName	1.3.6.1.4.1.2011.6.10.1.4.2.1.3	DisplayString	read-only	UserName of users who have the configuration level or have locked the configuration.
STR hwCfgOperateLevelUsersSessionDesc	1.3.6.1.4.1.2011.6.10.1.4.2.1.2	DisplayString	read-only	Description of users who have the configuration level or have locked the configuration.
I32 hwCfgOperateLevelUsersSessionID	1.3.6.1.4.1.2011.6.10.1.4.2.1.1	Integer32	read-only	SessionID of users who have the configuration level or have locked the configuration.
hwCfgOperateLevelUsersTable	1.3.6.1.4.1.2011.6.10.1.4.2		not-accessible	Table on users of configuration lock or level.
I32 hwCfgOperateLevelUsersTimeout	1.3.6.1.4.1.2011.6.10.1.4.2.1.7	Integer32	read-only	Unlock without configuration seconds, 1-7200, the default is 30
INT hwCfgOperateLockConfigDataStore	1.3.6.1.4.1.2011.6.10.1.4.1	INTEGER	read-write	Config data unit lock/unlock controller,if set active(2),the lock will be locked if no one locked it before. if set inactive(1),the lock will be unlocked if the currunt user locked it before.
INT hwCfgOperateOnError	1.3.6.1.4.1.2011.6.10.1.2.4.1.13	INTEGER	read-create	This object specifies the action when a configuration command fails to be executed. continueOnError: skips the failed configuration command and continues to run other configuration commands. stopOnError: stops running the failed configuration command and does not run other configuration commands. rollbackOnError: rolls back the configuration to that before the configuration file is executed.
INT hwCfgOperateProtocol	1.3.6.1.4.1.2011.6.10.1.2.4.1.3	INTEGER	read-create	If the value of hwCfgOperateType is running2Net,net2Running,net2Startup or startup2net, this object specifies the protocol which is used for file transfer . The default protocol is ftp if no protocol is specified. And for other value of hwCfgOperateType , this object may be ignored by the implementation. When hwCfgOperateProtocol is specified as SFTP, only password authentication-type is valid.
hwCfgOperateResultEntry	1.3.6.1.4.1.2011.6.10.1.2.5.1		not-accessible	The result entries of configuration operation requests.
I32 hwCfgOperateResultGlobalEntryLimit	1.3.6.1.4.1.2011.6.10.1.2.3	Integer32	read-write	The maximum number of copy entries that may be held in hwCfgOperateResultTable. A particular setting does not guarantee that much data can be held. Default value is 5.
I32 hwCfgOperateResultIndex	1.3.6.1.4.1.2011.6.10.1.2.5.1.1	Integer32	not-accessible	The index of Table, which is an incremental integer. The maximum value of the node is 2147483647.The agent should wrap the value to 1 and flush all the existing entries when the maximum value is reached.
I32 hwCfgOperateResultOptIndex	1.3.6.1.4.1.2011.6.10.1.2.5.1.2	Integer32	read-only	The operation index in the hwCfgOperateTable.
CON hwCfgOperateResultOpType	1.3.6.1.4.1.2011.6.10.1.2.5.1.3	ConfigOperationType	read-only	The operation type in the hwCfgOperateTable.
hwCfgOperateResultTable	1.3.6.1.4.1.2011.6.10.1.2.5		not-accessible	A table of config-operation requests result.
ROW hwCfgOperateRowStatus	1.3.6.1.4.1.2011.6.10.1.2.4.1.9	RowStatus	read-create	The status of this table entry. When the status is active : (1) In the situation that the specified transfer operation by ftp/tftp is in progress, the transfer operation will be aborted if the status is set to notInService. (2) In any other situations, the specified operation will not be aborted even if the status is set to notInService.
IP hwCfgOperateServerAddress	1.3.6.1.4.1.2011.6.10.1.2.4.1.5	IpAddress	read-create	When the operation type is running2Net,net2Running,net2Startup or startup2net , the ip address of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. Values of 0.0.0.0 or FF.FF.FF.FF are not permitted.
IP hwCfgOperateServerAddressNet	1.3.6.1.4.1.2011.6.10.1.2.4.1.18	InetAddress	read-create	Address or host name of the FTP/TFTP/SFTP server from/to which to download/upload must be specified.
IPt hwCfgOperateServerAddressType	1.3.6.1.4.1.2011.6.10.1.2.4.1.17	InetAddressType	read-create	The ip address type of the FTP/TFTP/SFTP server from/to which to download/upload must be specified. 1 is used for ipv4, 2 is used for ipv6.
I32 hwCfgOperateServerPort	1.3.6.1.4.1.2011.6.10.1.2.4.1.10	Integer32	read-create	This object specifies the SFTP/FTP server port that is used for file transfer only if the value of hwCfgOperateProtocol is sftp/ftp. The default SFTP server port is 22 if no port is specified. The default FTP server port is 21 if no port is specified. If the value of hwCfgOperateProtocol is not sftp/ftp, this object is ignored by the implementation.
IP hwCfgOperateSourceAddress	1.3.6.1.4.1.2011.6.10.1.2.4.1.11	IpAddress	read-create	The source IP address. When the operation type is running2Net, net2Running, net2Startup or startup2net, the source IP address of the client may be specified or not. Default is 0.0.0.0 . If the source type is set to both of IP address and interface, the former has the priority.
OCT hwCfgOperateSourceInterface	1.3.6.1.4.1.2011.6.10.1.2.4.1.12	OCTET STRING	read-create	The name of the interface.When the operation type is running2Net, net2Running,net2Startup or startup2net, the source interface of the FTP/TFTP client may be specified or not. If the source type is set to both of IP address and interface,the former has the priority.
INT hwCfgOperateState	1.3.6.1.4.1.2011.6.10.1.2.5.1.4	INTEGER	read-only	The status of the specified operation. opInProgress : specified operation is active opOperationSuccess : specified operation is supported and completed successfully opInvalidOperation : command invalid or command/protocol/device combination unsupported opInvalidProtocol : invalid protocol specified opInvalidSourceName : invalid source file name specified. opInvalidDestName : invalid target name specified. opInvalidServerAddress : invalid server address specified opDeviceBusy : specified device is in use and locked by another process opDeviceOpenError : invalid device name opDeviceError : device read, write or erase error opDeviceNotProgrammable : device is read-only but a write or erase operation was specified opDeviceFull : device is filled to capacity opFileOpenError : invalid file name; file not found in partition opFileTransferError : file transfer was unsuccessfull; network failure opFileChecksumError : file checksum in Flash failed opNoMemory : system running low on memory opAuthFail: invalid user name or password opTimeOut : file transfer was timeout opUnknownFailure : failure unknown opAbort : transfer operation has been aborted opInvalidSourceAdress : invalid source address specified. opInvalidSourceInterface : invalid source interface specified. opCmdExecuteFail : execute command return error.
hwCfgOperateTable	1.3.6.1.4.1.2011.6.10.1.2.4		not-accessible	A table of config-operation requests.
TIK hwCfgOperateTime	1.3.6.1.4.1.2011.6.10.1.2.5.1.5	TimeTicks	read-only	Records the time taken for the operation. This object will be like a stopwatch, starting when the operation starts, and stopping when the operation completes.
I32 hwCfgOperateTransferProgress	1.3.6.1.4.1.2011.6.10.1.2.5.1.7	Integer32	read-only	This object indicates progress of file transfer in the hwCfgOperateTable. When hwCfgOperateProtocol is specified as 2(tftp) or 3(sftp), and hwCfgOperateType is specified as net2Running or net2Startup, this object will be set as 65535, which indicates the progress can not be calculated.
CON hwCfgOperateType	1.3.6.1.4.1.2011.6.10.1.2.4.1.2	ConfigOperationType	read-create	Specifies the type of an operation on configuration. For detailed information, please see the ConfigOperationType definition.
STR hwCfgOperateUserName	1.3.6.1.4.1.2011.6.10.1.2.4.1.6	DisplayString	read-create	When the operation type is running2Net,net2Running,net2Startup or startup2net , the user name for the FTP/SFTP server from/to which to download/upload should be specified. The object must be created if hwCfgOperateProtocol has the value of 'ftp'.
STR hwCfgOperateUserPassword	1.3.6.1.4.1.2011.6.10.1.2.4.1.7	DisplayString	read-create	When the operation type is running2Net,net2Running,net2Startup or startup2net , the user password for the FTP/SFTP server from/to which to download/upload should be specified. The object must be created if hwCfgOperateProtocol has the value of 'ftp'. When get the value of the field, the device will return a zero-length string. When set the field, its value cannot be a string that contains no character.
STR hwCfgOperateVpnInstance	1.3.6.1.4.1.2011.6.10.1.2.4.1.19	DisplayString	read-create	The VPN instance name that through which to transfer the file.
INT hwCfgRestoreErrCode	1.3.6.1.4.1.2011.6.10.1.2.8	INTEGER	accessible-for-notify	ErrorCode: cause of an alarm.(1:Failed to restore some configurations. 2:Failed to restore all configurations because of a failure to open the configuration file. 3:Failed to restore all configurations because of the nonexistent configuration file. 4:Failed to restore all configurations because of the nonexistent configuration file. 5: Failed to restore all configurations because of other reasons.)
NTF hwCfgRestoreFail	1.3.6.1.4.1.2011.6.10.2.7			When configuration restoration fails, this trap is generated.
TIK hwCfgRunModifiedLast	1.3.6.1.4.1.2011.6.10.1.1.1	TimeTicks	read-only	The object records the value of sysUpTime when the current configuration running in the system was last modified.
TIK hwCfgRunSavedLast	1.3.6.1.4.1.2011.6.10.1.1.2	TimeTicks	read-only	The object records the value of sysUpTime when the current configuration running in the system was last saved. If the value of the object is smaller than hwCfgRunModifiedLast, the current configuration has been modified but not saved.
hwCfgSave	1.3.6.1.4.1.2011.6.10.1.3
I32 hwCfgSaveAutoCpuLimit	1.3.6.1.4.1.2011.6.10.1.3.4	Integer32	read-write	This object indicates the upper limit of the CPU usage when configurations are automatically saved.If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 50.
I32 hwCfgSaveAutoDelay	1.3.6.1.4.1.2011.6.10.1.3.6	Integer32	read-write	This object indicates the delay minute after some configurations change happens then configurations are automatically saved.If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 5.
I32 hwCfgSaveAutoInterval	1.3.6.1.4.1.2011.6.10.1.3.1	Integer32	read-write	The object records the interval minute of saving configuration automatically. the function of saving configuration automatically is disable when the interval is zero, else it is enable(the default is 30 minutes).
I32 hwCfgSaveAutoNoCfgInterval	1.3.6.1.4.1.2011.6.10.1.3.5	Integer32	read-write	This object indicates the interval from the time configurations are automatically saved to now.If the function of saving configuration automatically is not enabled, the value is insignificant. Default value is 30.
DAT hwCfgSaveAutoTime	1.3.6.1.4.1.2011.6.10.1.3.2	DateAndTime	read-only	The object records the latest date and time when the current configurations were saved automatically in the system.
hwCfgSaveGroup	1.3.6.1.4.1.2011.6.10.3.2.4			A group of configuration operation.
DAT hwCfgSaveManualTime	1.3.6.1.4.1.2011.6.10.1.3.3	DateAndTime	read-only	The object records the latest date and time when the current configurations were saved manually in the system.
TIK hwCfgStartModifiedLast	1.3.6.1.4.1.2011.6.10.1.1.3	TimeTicks	read-only	The object records the value of sysUpTime when the saved configuration used currently was last modified. It may have been changed by a save of the current configuration running in the system or other methods such as copy.
hwConfig	1.3.6.1.4.1.2011.6.10			The HUAWEI-CONFIG-MAN-MIB contains objects to manage the system configuration. It defines the model used to represent configuration data that exists elsewhere in the system and in peripheral devices. The MIB is proper for system configuration. NMS can query configuration change log information and operate configuration. There are no constraints on this MIB.
NTF hwConfigConsistent	1.3.6.1.4.1.2011.6.10.2.9			When system automatically detects that configurations of the main board and the slave board change from inconsistent to consistent, this trap is generated.
NTF hwConfigInconsistent	1.3.6.1.4.1.2011.6.10.2.8			When system automatically detects that configurations of the main board and the slave board are inconsistent, this trap is generated.
hwConfigManCompliance	1.3.6.1.4.1.2011.6.10.3.1.1			The compliance statement for entities implementing the Huawei Configuration Management MIB
hwConfigManCompliances	1.3.6.1.4.1.2011.6.10.3.1
hwConfigManConformance	1.3.6.1.4.1.2011.6.10.3
hwConfigManGroups	1.3.6.1.4.1.2011.6.10.3.2
hwConfigManNotifications	1.3.6.1.4.1.2011.6.10.2
hwConfigManObjects	1.3.6.1.4.1.2011.6.10.1

RFC description

Vendor-private Huawei MIB for configuration management; defines objects for managing device configuration, backups, and configuration change notifications on Huawei network equipment.

Start monitoring Huawei router or switch (configuration save/load/backup management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-CONFIG-MAN-MIB