LJ4200-MIB :: hold_job_timeout

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsLJ4200-MIBhold_job_timeout

hold_job_timeout

Module: LJ4200-MIB

OID (symbolic): LJ4200-MIB::hold_job_timeout

OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The time, in minutes, that the printer will wait before automatically deleting a held job. This allows the printer to automatically clean up jobs that have been forgotten (held but never released). Additional information: This only applies to temporary held jobs, i.e., HOLD=ON or PROOF. This is a global timer that only affects the jobs that are sent after it is set. A value of 0 means never delete the jobs. Setting it to an unsupported value causes the printer to substitute a value (listed below) and to return status. LaserJet 4600 supports values of 0, 60, 240, 1440, and 10080 The values are as follows: <=0 snap to 0 (disabled) >=1 and <=150 snap to 60 (60 minutes) >=151 and <=840 snap to 240 (4 hours) >=841 and <=2880 snap to 1440 (1 day) >=2881 snap to 10080 (1 week)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10
snmpwalk -v2c -c public <target> LJ4200-MIB::hold_job_timeout

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10.1
snmpget -v2c -c public <target> LJ4200-MIB::hold_job_timeout.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10.1 i <value>

Start monitoring HP LaserJet 4200 series printer with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ4200-MIB::hold_job_timeout OID value, configure state conditions and alerts, and monitor any HP LaserJet 4200 series printer from a single console.

OID Breakdown

Upper-level ancestors (16 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4netdmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2dmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1deviceCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.1systemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.1.6jobCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1settings_jobCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.4.2.1.1.6.1.10hold_job_timeoutLJ4200-MIB