LIEBERT-UPSTATION-G-UPS-MIB

All MIBs › LIEBERT-UPSTATION-G-UPS-MIB

Category: Domain: Power/UPS, Vendor: Liebert

Description: SNMP management objects for the Liebert UPStation G series UPS, providing battery, load, and power quality monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LIEBERT-UPSTATION-G-UPS-MIB?

LIEBERT-UPSTATION-G-UPS-MIB is a legacy Liebert (enterprise OID 476) proprietary MIB for the UPStation G UPS management card, reporting battery, input, and output status. Its objects cover manufacturer/model/software version/specific identity, battery time-remaining/temperature/voltage/current/capacity, input frequency and per-line table (voltage, current, VA), output frequency and line count, inverter status/temperature, and an alarm table (ID). As a performance/status MIB it lets an administrator watch battery runtime and input/output line conditions, and review active alarms, on a Liebert UPStation G UPS. It is deployed on Liebert UPStation G UPS management cards. Engineers can download the LIEBERT-UPSTATION-G-UPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LIEBERT-UPSTATION-G-UPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Liebert UPStation G UPS management cards

Monitoring Examples

An administrator checks lcUpsBatTimeRemaining and lcUpsAlarmTable to watch battery runtime and active alarms on a Liebert UPStation G UPS.

What Can Be Monitored

battery runtime, input/output conditions, and active alarms

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From RFC1213-MIB

DisplayString
sysUpTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
emerson	1.3.6.1.4.1.476
lcUpsAlarm	1.3.6.1.4.1.476.1.1.1.1.6
lcUpsAlarmBatteryBad	1.3.6.1.4.1.476.1.1.1.1.6.3.9
lcUpsAlarmConditions	1.3.6.1.4.1.476.1.1.1.1.6.3
OID lcUpsAlarmDescr	1.3.6.1.4.1.476.1.1.1.1.6.2.1.2	OBJECT IDENTIFIER	read-only	A reference to an alarm description object. The object referenced should not be accessible, but rather be used to provide a unique description of the alarm condition.
lcUpsAlarmEntry	1.3.6.1.4.1.476.1.1.1.1.6.2.1		not-accessible
INT lcUpsAlarmId	1.3.6.1.4.1.476.1.1.1.1.6.2.1.1	INTEGER	read-only	A unique identifier for an alarm condition. This value must remain constant between agent initializations.
lcUpsAlarmInputOverVoltage	1.3.6.1.4.1.476.1.1.1.1.6.3.8
lcUpsAlarmLowBatteryShutdown	1.3.6.1.4.1.476.1.1.1.1.6.3.2
lcUpsAlarmLowBatteryWarning	1.3.6.1.4.1.476.1.1.1.1.6.3.1
lcUpsAlarmOnBattery	1.3.6.1.4.1.476.1.1.1.1.6.3.10
lcUpsAlarmOutputOverloadShutdown	1.3.6.1.4.1.476.1.1.1.1.6.3.7
lcUpsAlarmOverTempShutdown	1.3.6.1.4.1.476.1.1.1.1.6.3.5
lcUpsAlarmOverTempWarning	1.3.6.1.4.1.476.1.1.1.1.6.3.4
GAU lcUpsAlarms	1.3.6.1.4.1.476.1.1.1.1.6.1	Gauge	read-only	The current number of alarm conditions.
lcUpsAlarmStopNoticeIssued	1.3.6.1.4.1.476.1.1.1.1.6.3.11
lcUpsAlarmTable	1.3.6.1.4.1.476.1.1.1.1.6.2		not-accessible
TIK lcUpsAlarmTime	1.3.6.1.4.1.476.1.1.1.1.6.2.1.3	TimeTicks	read-only	The value of sysUpTime when the alarm condition occured.
NTF lcUpsAlarmTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.11			An Alarm condition has occurred and is being reported in the lcUpsAlarmTable.
lcUpsAlarmUpsOff	1.3.6.1.4.1.476.1.1.1.1.6.3.12
lcUpsAlarmUtilFailed	1.3.6.1.4.1.476.1.1.1.1.6.3.3
INT lcUpsBatCapacity	1.3.6.1.4.1.476.1.1.1.1.2.6	INTEGER	read-only	The current battery capacity in percentage of total available.
INT lcUpsBatCurrent	1.3.6.1.4.1.476.1.1.1.1.2.4	INTEGER	read-only	The current battery discharging/charging current. (Unit of measure: Amp)
INT lcUpsBatTemperature	1.3.6.1.4.1.476.1.1.1.1.2.2	INTEGER	read-only	The battery temperature. (Unit of measure: Degree, Centigrade)
lcUpsBattery	1.3.6.1.4.1.476.1.1.1.1.2
INT lcUpsBatTimeRemaining	1.3.6.1.4.1.476.1.1.1.1.2.1	INTEGER	read-only	The estimated time to depletion of battery charge. (Unit of measure: Minute)
INT lcUpsBatVoltage	1.3.6.1.4.1.476.1.1.1.1.2.3	INTEGER	read-only	The current battery voltage. (Unit of measure: volt)
lcUpsControl	1.3.6.1.4.1.476.1.1.1.1.8
INT lcUpsControlCancelCommands	1.3.6.1.4.1.476.1.1.1.1.8.7	INTEGER	read-write	Setting this variable to 'cancel' will cause the agent to issue instructions to the UPS to cancel all outstanding commands, such as lcUpsControlOutputOff, lcUpsControlOutputOn, lcUpsControlUnixShutdown.
INT lcUpsControlOutputOffDelay	1.3.6.1.4.1.476.1.1.1.1.8.1	INTEGER	read-write	Setting this object causes the agent to instruct the UPS to turn off the output after the indicated number of seconds. The agent counts down the number of seconds until the event will take place. The agent issues an lcUpsOutputOffTrap when the countdown finishes. Note that different models have different clock resolutions, usually greater than 1 second. As a result, the command will only be accurate to the resolution of the UPS's clock. The command can be cancelled by setting lcUpsControlCancelCommand to the value cancel.
INT lcUpsControlOutputOffTrapDelay	1.3.6.1.4.1.476.1.1.1.1.8.3	INTEGER	read-write	When 'lcUpsControlOutputOffDelay' reaches a value less than or equal to this object's value, an lcUpsOutputOffWarningTrap will be produced and this object will be reset to 0.
INT lcUpsControlOutputOnDelay	1.3.6.1.4.1.476.1.1.1.1.8.2	INTEGER	read-write	Setting this object causes the agent to instruct the UPS to turn on the output after the indicated number of seconds. The agent counts down the number of seconds until the event will take place. The agent issues an lcUpsOutputOnTrap when the countdown finishes. Note that different models have different clock resolutions, usually greater than 1 second. As a result, the command will only be accurate to the resolution of the UPS's clock. The command can be cancelled by setting lcUpsControlCancelCommand to the value cancel.
INT lcUpsControlOutputOnTrapDelay	1.3.6.1.4.1.476.1.1.1.1.8.4	INTEGER	read-write	When 'lcUpsControlOutputOnDelay' reaches a value less than or equal to this object's value, an lcUpsOutputOnWarningTrap will be produced and this object will be reset to 0.
INT lcUpsControlRebootAgentDelay	1.3.6.1.4.1.476.1.1.1.1.8.8	INTEGER	read-write	Setting this object causes the agent to reboot after the indicated number of seconds have expired. The value will count down until the event takes place. The command can be cancelled by setting lcUpsControlCancleCommand to the value cancel.
INT lcUpsControlUnixShutdownDelay	1.3.6.1.4.1.476.1.1.1.1.8.5	INTEGER	read-write	Setting this object causes the agent to instruct the UPS to perform a UNIX Shutdown in the indicated number of seconds. The agent counts down the number of seconds until the event will take place. A Unix shutdown is only valid if the UPS is on Battery. During a UNIX Shutdown, the UPS will turn off the output even if the Utility comes back on line before the shutdown time arrives. Note that different models have different clock resolutions, usually greater than 1 second. As a result, the command will only be accurate to the resolution of the UPS's clock. The command can be cancelled by setting lcUpsControlCancelCommand to the value 'cancel'.
INT lcUpsControlUnixShutdownTrapDelay	1.3.6.1.4.1.476.1.1.1.1.8.6	INTEGER	read-write	When 'lcUpsControlUnixShutdownDelay' reaches a value less than or equal to this object's value, an lcUpsUnixShutdownWarningTrap will be produced and this object will be reset to 0.
lcUpsIdent	1.3.6.1.4.1.476.1.1.1.1.1
STR lcUpsIdentManufacturer	1.3.6.1.4.1.476.1.1.1.1.1.1	DisplayString	read-only	The UPS manufacturer.
STR lcUpsIdentModel	1.3.6.1.4.1.476.1.1.1.1.1.2	DisplayString	read-write	The UPS Model designation.
STR lcUpsIdentSoftwareVersion	1.3.6.1.4.1.476.1.1.1.1.1.3	DisplayString	read-only	The UPS SNMP Agent software version.
OID lcUpsIdentSpecific	1.3.6.1.4.1.476.1.1.1.1.1.4	OBJECT IDENTIFIER	read-only	A reference to MIB definitions specific to the particular UPS being managed. This object is used to locate the product-specific MIB for this device. If this information is not present, its value should be the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
lcUpsInput	1.3.6.1.4.1.476.1.1.1.1.3
INT lcUpsInputCurrent	1.3.6.1.4.1.476.1.1.1.1.3.6.1.3	INTEGER	read-only	The input current. (Unit of measure: Amp)
lcUpsInputEntry	1.3.6.1.4.1.476.1.1.1.1.3.6.1		not-accessible
INT lcUpsInputFrequency	1.3.6.1.4.1.476.1.1.1.1.3.1	INTEGER	read-only	The current input frequency. (Unit of measure: Hertz)
INT lcUpsInputLine	1.3.6.1.4.1.476.1.1.1.1.3.6.1.1	INTEGER	read-only	The input Line.
INT lcUpsInputNumLines	1.3.6.1.4.1.476.1.1.1.1.3.5	INTEGER	read-only	The number of input lines utilized in this device. This entry indicates the number of rows in the input table.
NTF lcUpsInputOverVoltageTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.8			An lcUpsInputOverVoltageTrap signifies that the UPS has detected a high input voltage condition.
lcUpsInputTable	1.3.6.1.4.1.476.1.1.1.1.3.6		not-accessible
INT lcUpsInputVA	1.3.6.1.4.1.476.1.1.1.1.3.6.1.4	INTEGER	read-only	The input volt-amps.
INT lcUpsInputVoltage	1.3.6.1.4.1.476.1.1.1.1.3.6.1.2	INTEGER	read-only	The input voltage. (Unit of measure: Volt)
lcUpsInverter	1.3.6.1.4.1.476.1.1.1.1.5
INT lcUpsInverterStatus	1.3.6.1.4.1.476.1.1.1.1.5.1	INTEGER	read-only	The state of the inverter. Unknown is returned if the state can not be determined.
INT lcUpsInverterTemp	1.3.6.1.4.1.476.1.1.1.1.5.2	INTEGER	read-only	The temperature of the inverter. (Unit of measure: degree, Centigrade)
NTF lcUpsLowBatteryShutdownTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.5			An lcUpsLowBatteryShutdownTrap signifies that the UPS has shut off the output due to a Low Battery state.
NTF lcUpsLowBatteryWarningTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.4			An lcUpsLowBatteryWarningTrap signifies that the UPS has entered a Low Battery state.
lcUpsNominal	1.3.6.1.4.1.476.1.1.1.1.9
INT lcUpsNominalInputFreq	1.3.6.1.4.1.476.1.1.1.1.9.6	INTEGER	read-write	The nominal input frequency. (Unit of measure: Hertz)
INT lcUpsNominalInputVoltage	1.3.6.1.4.1.476.1.1.1.1.9.2	INTEGER	read-write	The nominal input voltage. (Unit of measure: volt)
INT lcUpsNominalOutputFreq	1.3.6.1.4.1.476.1.1.1.1.9.5	INTEGER	read-write	The nominal output frequency. (Unit of measure: Hertz)
INT lcUpsNominalOutputVA	1.3.6.1.4.1.476.1.1.1.1.9.3	INTEGER	read-write	The nominal Volt-Amp rating.
INT lcUpsNominalOutputVoltage	1.3.6.1.4.1.476.1.1.1.1.9.1	INTEGER	read-write	The nominal output voltage. (Unit of measure: volt)
NTF lcUpsOnBatteryTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.3			An lcUpsOnBatteryTrap signifies that the UPS is currently on Battery Power.
lcUpsOutput	1.3.6.1.4.1.476.1.1.1.1.4
INT lcUpsOutputFrequency	1.3.6.1.4.1.476.1.1.1.1.4.1	INTEGER	read-only	The current output frequency. (Unit of measure: Hertz)
INT lcUpsOutputNumLines	1.3.6.1.4.1.476.1.1.1.1.4.3	INTEGER	read-only	The number of output lines utilized in this device. This entry indicates the number of rows in the output table.
NTF lcUpsOutputOffTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.12			An lcUpsOutputOffTrap is sent when the UPS turns all of its output off, either at the inverter or via a relay.
NTF lcUpsOutputOffWarningTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.13			An lcUpsOutputOffWarningTrap is sent when the lcUpsControlOutputOffDelay reaches the value of lcUpsControlOutputOffTrapDelay.
NTF lcUpsOutputOnTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.14			An lcUpsOutputOnTrap is sent when the UPS turns all of its output back on, either at the inverter or via a relay.
NTF lcUpsOutputOnWarningTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.15			An lcUpsOutputOnWarningTrap is sent when the lcUpsControlOutputOnDelay reaches the value of lcUpsControlOutputOnTrapDelay.
NTF lcUpsOverloadShutdownTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.2			An lcUpsOverloadShutdownTrap signifies that the UPS has detected an Overload condition where the output load has exceeded the UPS's rated capacity and has shut off the output.
NTF lcUpsOverTempShutdownTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.10			An lcUpsOverTempShutdownTrap signifies that the UPS has detected a excessive temperature condition and shut off the output.
NTF lcUpsOverTempWarningTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.9			An lcUpsOverTempWarningTrap signifies that the UPS has detected a excessive temperature condition.
lcUpsTest	1.3.6.1.4.1.476.1.1.1.1.7
INT lcUpsTestBattery	1.3.6.1.4.1.476.1.1.1.1.7.1	INTEGER	read-write	Setting this variable to 'start' will initiate the battery test. Setting this variable to 'abort' will stop the battery test if the test is in- progress, otherwise it has no effect. Setting this variable to 'unknown' has no effect. Reading this variable will always result in a return value of 'unknown'. If 'lcUpsTestBatteryStatus' is 'failed' the test may not be performed again and the status will remain in the failure state.
INT lcUpsTestBatteryStatus	1.3.6.1.4.1.476.1.1.1.1.7.2	INTEGER	read-only	The status of the battery test.
INT lcUpsTestDiag	1.3.6.1.4.1.476.1.1.1.1.7.3	INTEGER	read-write	Setting this variable to 'start' will initiate the diagnostics test. Setting this variable to 'abort' will stop the diagnostics test if the test is in-progress, otherwise it has no effect. Setting this variable to 'unknown' has no effect. Reading this variable will always result in a return value of 'unknown'.
INT lcUpsTestDiagStatus	1.3.6.1.4.1.476.1.1.1.1.7.4	INTEGER	read-only	The status of the diagnostics test.
lcUpsTraps	1.3.6.1.4.1.476.1.1.1.1.11
NTF lcUpsUnixShutdownTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.16			An lcUpsUnixShutodwnTrap is sent 2 seconds before the UPS is scheduled to perform a Unix Shutdown.
NTF lcUpsUnixShutdownWarningTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.17			An lcUpsUnixShutdownWarningTrap is sent when the lcUpsControlUnixShudownDelay reaches the value of lcUpsControlUnixShutdownTrapDelay.
NTF lcUpsUtilPowerFailedTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.6			An lcUpsUtilPowerFailedTrap signifies that the utility power input to the UPS has been lost.
NTF lcUpsUtilPowerRestoredTrap	1.3.6.1.4.1.476.1.1.1.1.11.0.7			An lcUpsUtilPowerRestoredTrap signifies that the utility power has been restored to the UPS.
lgUpsAlarm	1.3.6.1.4.1.476.1.1.1.4.6
lgUpsAlarmConditions	1.3.6.1.4.1.476.1.1.1.4.6.1
lgUpsAlarmDCOverVoltageShutdown	1.3.6.1.4.1.476.1.1.1.4.6.1.1
lgUpsAlarmInputUVOnStartup	1.3.6.1.4.1.476.1.1.1.4.6.1.5
lgUpsAlarmLNReversedShutdown	1.3.6.1.4.1.476.1.1.1.4.6.1.3
lgUpsAlarmOutputShortShutdown	1.3.6.1.4.1.476.1.1.1.4.6.1.2
lgUpsAlarmPFCFailedOnStartup	1.3.6.1.4.1.476.1.1.1.4.6.1.6
lgUpsAlarmRemoteShutdown	1.3.6.1.4.1.476.1.1.1.4.6.1.4
NTF lgUpsDCOverVoltageShutdownTrap	1.3.6.1.4.1.476.1.1.1.4.11.0.1			An lgUpsDCOverVoltageShutdownTrap signifies that the UPS has detected that battery voltage is over the nominal level.
NTF lgUpsInputUVOnStartupTrap	1.3.6.1.4.1.476.1.1.1.4.11.0.4			An lgUpsInputUVOnStartupTrap signifies that the UPS detected a low voltage condition upon system startup.
NTF lgUpsLNReversedShutdownTrap	1.3.6.1.4.1.476.1.1.1.4.11.0.3			An lgUpsLNReversedShutdownTrap signifies that the UPS has detected that Line and Neutral have been reversed.
NTF lgUpsOutputShortShutdownTrap	1.3.6.1.4.1.476.1.1.1.4.11.0.2			An lgUpsOutputShortShutdownTrap signifies that the UPS has detected a short circuit across the output.
lgUpsTraps	1.3.6.1.4.1.476.1.1.1.4.11
liebertCorp	1.3.6.1.4.1.476.1
liebertUps	1.3.6.1.4.1.476.1.1
luCore	1.3.6.1.4.1.476.1.1.1.1
luExperimental	1.3.6.1.4.1.476.1.1.2
luExtensions	1.3.6.1.4.1.476.1.1.1
luPrivate	1.3.6.1.4.1.476.1.1.3
luUPStationG	1.3.6.1.4.1.476.1.1.1.4

RFC description

Monitors Liebert Upstation G UPS status, battery, and power supply metrics.

Start monitoring Liebert UPStation G UPS management card with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LIEBERT-UPSTATION-G-UPS-MIB

What Is LIEBERT-UPSTATION-G-UPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description