All MIBs › LIEBERT-UPSTATION-G-UPS-MIB › lcUpsAlarms
lcUpsAlarms
Module: LIEBERT-UPSTATION-G-UPS-MIB
OID (symbolic): LIEBERT-UPSTATION-G-UPS-MIB::lcUpsAlarms
OID (numeric): 1.3.6.1.4.1.476.1.1.1.1.6.1
Node type: OBJECT-TYPE
Type: Gauge
Access: read-only
Description: The current number of alarm conditions.
What is lcUpsAlarms?
This read-only gauge reports the current number of active alarm conditions on the UPS, a quick health-check value an admin polls to see if anything in the alarm table needs attention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.476.1.1.1.1.6.1 snmpwalk -v2c -c public <target> LIEBERT-UPSTATION-G-UPS-MIB::lcUpsAlarms
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.476.1.1.1.1.6.1.1 snmpget -v2c -c public <target> LIEBERT-UPSTATION-G-UPS-MIB::lcUpsAlarms.1
Start monitoring Liebert UPStation G UPS management card with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LIEBERT-UPSTATION-G-UPS-MIB::lcUpsAlarms OID value, configure state conditions and alerts, and monitor any Liebert UPStation G UPS management card from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.476 | emerson | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1 | liebertCorp | LIEBERT-GP-REGISTRATION-MIB |
| 1.3.6.1.4.1.476.1.1 | liebertUps | LIEBERT-MICRO-UPS-MIB |
| 1.3.6.1.4.1.476.1.1.1 | luExtensions | LIEBERT-MICRO-UPS-MIB |
| 1.3.6.1.4.1.476.1.1.1.1 | luCore | LIEBERT-MICRO-UPS-MIB |
| 1.3.6.1.4.1.476.1.1.1.1.6 | lcUpsAlarm | LIEBERT-MICRO-UPS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.476.1.1.1.1.6.1 | lcUpsAlarms | LIEBERT-UPSTATION-G-UPS-MIB |