All MIBs › INTEL-IPX-MIB
Category: Vendor: Intel
Description: Intel IPX protocol MIB providing SNMP objects for Novell IPX routing, SAP, and RIP configuration and monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is INTEL-IPX-MIB?
INTEL-IPX-MIB is a vendor-specific MIB for configuring and monitoring Novell IPX routing, SAP, and RIP behavior on Intel routing/access equipment. It exposes a per-link IPX configuration table covering routing protocol, network number, frame type, and RIP update/trigger timers. Its monitoring emphasis is on protocol/software configuration state rather than hardware sensors, letting an admin confirm that IPX routing links are correctly configured, numbered, and actively exchanging routes. It depends on interface-indexing conventions similar to IF-MIB, since IPX link configuration entries are keyed by a link index tied to the physical/logical interface. It is deployed on legacy Intel routers/gateways operating in Novell NetWare IPX network environments, largely of historical interest today. Engineers can download the INTEL-IPX-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in INTEL-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Intel router/access equipment running legacy Novell IPX routing
Monitoring Examples
ipxLinkConfTable/ipxLinkConfEntry keyed by ipxLinkConfIpxLinkIndex exposes ipxLinkConfRoutingProtocol, ipxLinkConfFrameType, and ipxLinkConfNet to verify a link is configured with the correct IPX network number and frame type. ipxLinkConfRipUpdateInterval and ipxLinkConfRipTrigger reveal RIP timer settings, and a frame-type mismatch between two ends of a link (visible by comparing ipxLinkConfFrameType values) would explain an IPX routing adjacency failure.
What Can Be Monitored
- IPX link routing protocol
- IPX network number and frame type
- RIP update interval
- RIP trigger updates
- numbered vs unnumbered link configuration
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ipx | 1.3.6.1.4.1.343.6.22 | |||
| ipxControl | 1.3.6.1.4.1.343.6.22.1 | |||
| INT ipxControlCommand | 1.3.6.1.4.1.343.6.22.1.1 | INTEGER | write-only | Control register : - Write 1 to flush routing table. (Affects ipxRipTable & ipxSapTable) - Write 2 to update RIP & SAP tables. (Affects ipxRipTable & ipxSapTable) |
| ipxConf | 1.3.6.1.4.1.343.6.22.2 | |||
| ipxLinkConfTable | 1.3.6.1.4.1.343.6.22.2.1 | not-accessible | This table contains link-specific configuration parameters. | |
| ipxLinkConfEntry | 1.3.6.1.4.1.343.6.22.2.1.1 | not-accessible | ||
| INT ipxLinkConfIpxLinkIndex | 1.3.6.1.4.1.343.6.22.2.1.1.1 | INTEGER | read-only | IPX Link index. This is a number that uniquely identifies an IPX interface. |
| INT ipxLinkConfRoutingProtocol | 1.3.6.1.4.1.343.6.22.2.1.1.2 | INTEGER | read-write | Determines if dynamic routing using RIP and SAP is enabled or if only static routes and services are used. |
| INT ipxLinkConfNumbered | 1.3.6.1.4.1.343.6.22.2.1.1.3 | INTEGER | read-write | Determines if a WAN link is numbered. |
| OCT ipxLinkConfNet | 1.3.6.1.4.1.343.6.22.2.1.1.4 | OCTET STRING | read-write | The IPX net number defines a unique network number. This object is not relevant for unnumbered WANs. |
| INT ipxLinkConfFrameType | 1.3.6.1.4.1.343.6.22.2.1.1.5 | INTEGER | read-write | The Frame type parameter specifies the encapsulation method to use. Type(1) is also called Ethernet II. |
| OCT ipxLinkConfFrameParam | 1.3.6.1.4.1.343.6.22.2.1.1.6 | OCTET STRING | read-only | The actual frame format for ipx2ConfFrameType. |
| INT ipxLinkConfIpxWanNegotiation | 1.3.6.1.4.1.343.6.22.2.1.1.7 | INTEGER | read-write | IPX WAN 2 Protocol |
| INT ipxLinkConfRipUpdateInterval | 1.3.6.1.4.1.343.6.22.2.1.1.8 | INTEGER | read-write | Time between RIP updates in seconds. |
| INT ipxLinkConfRipTrigger | 1.3.6.1.4.1.343.6.22.2.1.1.9 | INTEGER | read-write | Use triggered RIP updates. |
| INT ipxLinkConfSapUpdateInterval | 1.3.6.1.4.1.343.6.22.2.1.1.10 | INTEGER | read-write | Time between SAP updates in seconds. |
| INT ipxLinkConfSapTrigger | 1.3.6.1.4.1.343.6.22.2.1.1.11 | INTEGER | read-write | Use triggered SAP updates. |
| INT ipxLinkConfAutomaticDelay | 1.3.6.1.4.1.343.6.22.2.1.1.12 | INTEGER | read-write | Specifies if the delay associated with use of the LAN or WAN Link is determined automatically or is manually defined. |
| INT ipxLinkConfDelay | 1.3.6.1.4.1.343.6.22.2.1.1.13 | INTEGER | read-write | The configured delay in ticks (1 tick = 55 ms) |
| INT ipxLinkConfSpxSpoofing | 1.3.6.1.4.1.343.6.22.2.1.1.14 | INTEGER | read-write | SPX Spoofing is used to answer SPX keep-alive packets on behalf of a remote client when the WAN Link is in timecut mode. |
| INT ipxLinkConfSpxSessionTimeout | 1.3.6.1.4.1.343.6.22.2.1.1.15 | INTEGER | read-write | Defines the time limit for spoofing SPX keep-alive packets from the LAN on behalf of remote clients. |
| INT ipxLinkConfType20Broadcast | 1.3.6.1.4.1.343.6.22.2.1.1.16 | INTEGER | read-write | Type 20 packets are used to propogate broadcasts using different protocols through the network. |
| INT ipxLinkConfWatchdogSpoofing | 1.3.6.1.4.1.343.6.22.2.1.1.17 | INTEGER | read-write | Watchdog Spoofing is used to answer IPX watchdog (keep-alive) packets from a local server on behalf of a remote client when the WAN Link is in timecut mode. |
| FLT ipxLinkConfRipFltRxDefaultAction | 1.3.6.1.4.1.343.6.22.2.1.1.18 | FltAction | read-write | Default action for RIP Receive Filters. |
| FLT ipxLinkConfRipFltTxDefaultAction | 1.3.6.1.4.1.343.6.22.2.1.1.19 | FltAction | read-write | Default action for RIP Transmit Filters. |
| FLT ipxLinkConfSapFltRxDefaultAction | 1.3.6.1.4.1.343.6.22.2.1.1.20 | FltAction | read-write | Default action for SAP Receive Filters. |
| FLT ipxLinkConfSapFltTxDefaultAction | 1.3.6.1.4.1.343.6.22.2.1.1.21 | FltAction | read-write | Default action for SAP Transmit Filters. |
| FLT ipxLinkConfDataFltRxDefaultAction | 1.3.6.1.4.1.343.6.22.2.1.1.22 | FltAction | read-write | Default action for Data Receive Filters. |
| FLT ipxLinkConfDataFltTxDefaultAction | 1.3.6.1.4.1.343.6.22.2.1.1.23 | FltAction | read-write | Default action for Data Transmit Filters. |
| INT ipxLinkConfDataFilters | 1.3.6.1.4.1.343.6.22.2.1.1.24 | INTEGER | read-write | Configuration status of Data Filters |
| OCT ipxLinkConfCreateObj | 1.3.6.1.4.1.343.6.22.2.1.1.25 | OCTET STRING | read-write | Create a non existing table entry. If the entry already exist, genError is returned. Binary format (big-endian): 2 bytes : ipxLinkMonMplIndex 1 byte : ipxLinkConfRoutingProtocol 1 byte : ipxLinkConfNumbered 4 bytes : ipxLinkConfNet 2 bytes : ipxLinkConfFrameType 1 byte : ipxLinkConfIpxWanNegotiation 4 bytes : ipxLinkConfRipUpdateInterval 1 byte : ipxLinkConfRipTrigger 4 bytes : ipxLinkConfSapUpdateInterval 1 byte : ipxLinkConfSapTrigger 1 byte : ipxLinkConfAutomaticDelay 1 byte : ipxLinkConfDelay 1 byte : ipxLinkConfSpxSpoofing 1 byte : ipxLinkConfSpxSessionTimeout 1 byte : ipxLinkConfType20Broadcast 1 byte : ipxLinkConfWatchdogSpoofing 1 byte : ipxLinkConfRipFltRxDefaultAction 1 byte : ipxLinkConfRipFltTxDefaultAction 1 byte : ipxLinkConfSapFltRxDefaultAction 1 byte : ipxLinkConfSapFltTxDefaultAction 1 byte : ipxLinkConfDataFltRxDefaultAction 1 byte : ipxLinkConfDataFltTxDefaultAction 1 byte : ipxLinkConfDataFilters |
| INT ipxLinkConfDeleteObj | 1.3.6.1.4.1.343.6.22.2.1.1.26 | INTEGER | read-write | |
| ipxRipFltTable | 1.3.6.1.4.1.343.6.22.2.2 | not-accessible | RIP Filters | |
| ipxRipFltEntry | 1.3.6.1.4.1.343.6.22.2.2.1 | not-accessible | ||
| INT ipxRipFltIpxLinkIndex | 1.3.6.1.4.1.343.6.22.2.2.1.1 | INTEGER | read-only | IPX Link index |
| FLT ipxRipFltDirection | 1.3.6.1.4.1.343.6.22.2.2.1.2 | FltDirection | read-only | Filter direction |
| INT ipxRipFltNumber | 1.3.6.1.4.1.343.6.22.2.2.1.3 | INTEGER | read-only | Filter number |
| FLT ipxRipFltAction | 1.3.6.1.4.1.343.6.22.2.2.1.4 | FltAction | read-only | Action to perform on packet if filter matches. |
| OCT ipxRipFltNetworkAddress | 1.3.6.1.4.1.343.6.22.2.2.1.5 | OCTET STRING | read-only | Network number or group of networks. If ipxRipFltNetworkAddress is 0x00000000 and ipxRipFltNetworkMask is 0xFFFFFFFF then filtering is disabled. |
| OCT ipxRipFltNetworkMask | 1.3.6.1.4.1.343.6.22.2.2.1.6 | OCTET STRING | read-only | Network mask. See also ipxRipFltNetworkAddress |
| ipxSapFltTable | 1.3.6.1.4.1.343.6.22.2.3 | not-accessible | SAP Filters | |
| ipxSapFltEntry | 1.3.6.1.4.1.343.6.22.2.3.1 | not-accessible | ||
| INT ipxSapFltIpxLinkIndex | 1.3.6.1.4.1.343.6.22.2.3.1.1 | INTEGER | read-only | IPX Link index |
| FLT ipxSapFltDirection | 1.3.6.1.4.1.343.6.22.2.3.1.2 | FltDirection | read-only | Filter direction |
| INT ipxSapFltNumber | 1.3.6.1.4.1.343.6.22.2.3.1.3 | INTEGER | read-only | Filter number |
| FLT ipxSapFltAction | 1.3.6.1.4.1.343.6.22.2.3.1.4 | FltAction | read-only | Action to perform on packet if filter matches. |
| OCT ipxSapFltNetworkAddress | 1.3.6.1.4.1.343.6.22.2.3.1.5 | OCTET STRING | read-only | Network number or group of networks. If ipxSapFltNetworkAddress is 0x00000000 and ipxSapFltNetworkMask is 0xFFFFFFFF then filtering is disabled. |
| OCT ipxSapFltNetworkMask | 1.3.6.1.4.1.343.6.22.2.3.1.6 | OCTET STRING | read-only | Network mask |
| OCT ipxSapFltNodeAddress | 1.3.6.1.4.1.343.6.22.2.3.1.7 | OCTET STRING | read-only | If node is 0x00000000 filtering is disabled. |
| INT ipxSapFltServiceType | 1.3.6.1.4.1.343.6.22.2.3.1.8 | INTEGER | read-only | Service type |
| OCT ipxSapFltServerName | 1.3.6.1.4.1.343.6.22.2.3.1.9 | OCTET STRING | read-only | Server name |
| ipxDataFltTable | 1.3.6.1.4.1.343.6.22.2.4 | not-accessible | Data Filters | |
| ipxDataFltEntry | 1.3.6.1.4.1.343.6.22.2.4.1 | not-accessible | ||
| INT ipxDataFltIpxLinkIndex | 1.3.6.1.4.1.343.6.22.2.4.1.1 | INTEGER | read-only | IPX Link index |
| FLT ipxDataFltDirection | 1.3.6.1.4.1.343.6.22.2.4.1.2 | FltDirection | read-only | Filter direction |
| INT ipxDataFltNumber | 1.3.6.1.4.1.343.6.22.2.4.1.3 | INTEGER | read-only | Filter number |
| FLT ipxDataFltAction | 1.3.6.1.4.1.343.6.22.2.4.1.4 | FltAction | read-only | Action to perform on packet if filter matches. |
| OCT ipxDataFltDstNetworkAddress | 1.3.6.1.4.1.343.6.22.2.4.1.5 | OCTET STRING | read-only | Network number or group of networks. If ipxDataFltDstNetworkAddress is 0x00000000 and ipxDataFltDstNetworkMask is 0xFFFFFFFF then filtering is disabled. |
| OCT ipxDataFltDstNetworkMask | 1.3.6.1.4.1.343.6.22.2.4.1.6 | OCTET STRING | read-only | Destination network mask |
| OCT ipxDataFltDstNodeAddress | 1.3.6.1.4.1.343.6.22.2.4.1.7 | OCTET STRING | read-only | If node is 0x00000000 filtering is disabled. |
| INT ipxDataFltDstSocketFilter | 1.3.6.1.4.1.343.6.22.2.4.1.8 | INTEGER | read-only | Determines if filtering on destination socket is enabled. |
| INT ipxDataFltDstSocket | 1.3.6.1.4.1.343.6.22.2.4.1.9 | INTEGER | read-only | Destination socket |
| OCT ipxDataFltSrcNetworkAddress | 1.3.6.1.4.1.343.6.22.2.4.1.10 | OCTET STRING | read-only | Network number or group of networks. If ipxDataFltDstNetworkAddress is 0x00000000 and ipxDataFltDstNetworkMask is 0xFFFFFFFF then filtering is disabled. |
| OCT ipxDataFltSrcNetworkMask | 1.3.6.1.4.1.343.6.22.2.4.1.11 | OCTET STRING | read-only | Source network mask |
| OCT ipxDataFltSrcNodeAddress | 1.3.6.1.4.1.343.6.22.2.4.1.12 | OCTET STRING | read-only | If node is 0x00000000 filtering is disabled. |
| INT ipxDataFltSrcSocketFilter | 1.3.6.1.4.1.343.6.22.2.4.1.13 | INTEGER | read-only | Determines if filtering on source socket is enabled. |
| INT ipxDataFltSrcSocket | 1.3.6.1.4.1.343.6.22.2.4.1.14 | INTEGER | read-only | Source socket |
| INT ipxDataFltPacketTypeFilter | 1.3.6.1.4.1.343.6.22.2.4.1.15 | INTEGER | read-only | Determines if filtering on packet type is enabled. |
| INT ipxDataFltPacketType | 1.3.6.1.4.1.343.6.22.2.4.1.16 | INTEGER | read-only | Packet Type |
| CTR ipxDataFltHits | 1.3.6.1.4.1.343.6.22.2.4.1.17 | Counter | read-only | Number of matches for this filter |
| INT ipxConfAutoIntNetNumber | 1.3.6.1.4.1.343.6.22.2.5 | INTEGER | read-write | Specifies if the Internal Network Number should be defined automatically (which means that the 4 lower bytes of the MAC address are used. |
| OCT ipxConfIntNetNumber | 1.3.6.1.4.1.343.6.22.2.6 | OCTET STRING | read-write | Internal Network Number |
| ipxStatus | 1.3.6.1.4.1.343.6.22.3 | |||
| ipxLinkMonTable | 1.3.6.1.4.1.343.6.22.3.1 | not-accessible | This table contains link-specific parameters. | |
| ipxLinkMonEntry | 1.3.6.1.4.1.343.6.22.3.1.1 | not-accessible | ||
| CTR ipxLinkMonIpxLinkIndex | 1.3.6.1.4.1.343.6.22.3.1.1.1 | Counter | read-only | IPX Link index. |
| INT ipxLinkMonIfIndex | 1.3.6.1.4.1.343.6.22.3.1.1.2 | INTEGER | read-only | Interface index for layer below. |
| INT ipxLinkMonState | 1.3.6.1.4.1.343.6.22.3.1.1.3 | INTEGER | read-only | Link state |
| INT ipxLinkMonDelay | 1.3.6.1.4.1.343.6.22.3.1.1.4 | INTEGER | read-only | Link Delay in ticks (1 tick = 55 ms). The delay can be calculated automatically or configured manuallly. |
| INT ipxLinkMonMtuSize | 1.3.6.1.4.1.343.6.22.3.1.1.5 | INTEGER | read-only | MTU Size is maximum packet size that can be received and transmitted |
| TIK ipxStatusConfigTimeStamp | 1.3.6.1.4.1.343.6.22.3.2 | TimeTicks | read-only | Last configuration time in time ticks (like sysUpTime). |
| CTR ipxStatusReachableNets | 1.3.6.1.4.1.343.6.22.3.3 | Counter | read-only | Number of reachable networks in RIP Table. |
| CTR ipxStatusDeadNets | 1.3.6.1.4.1.343.6.22.3.4 | Counter | read-only | Number of dead networks in RIP Table. |
| CTR ipxStatusReachableServices | 1.3.6.1.4.1.343.6.22.3.5 | Counter | read-only | Number of reachable networks in SAP Table. |
| CTR ipxStatusDeadServices | 1.3.6.1.4.1.343.6.22.3.6 | Counter | read-only | Number of dead (hops=16) networks in SAP Table. |
| TIK ipxStatusLinkTimeStamp | 1.3.6.1.4.1.343.6.22.3.7 | TimeTicks | read-only | Last change in a link state in time ticks (like sysUpTime). |
| ipxCount | 1.3.6.1.4.1.343.6.22.4 | |||
| ipxLinkCntTable | 1.3.6.1.4.1.343.6.22.4.1 | not-accessible | This table contains link-specific counters. | |
| ipxLinkCntEntry | 1.3.6.1.4.1.343.6.22.4.1.1 | not-accessible | ||
| INT ipxLinkCntIpxLinkIndex | 1.3.6.1.4.1.343.6.22.4.1.1.1 | INTEGER | read-only | IPX Link index. |
| CTR ipxLinkCntRxTotal | 1.3.6.1.4.1.343.6.22.4.1.1.2 | Counter | read-only | Total number of received IPX packets. |
| CTR ipxLinkCntTxTotal | 1.3.6.1.4.1.343.6.22.4.1.1.3 | Counter | read-only | Total number of transmitted IPX packets. |
| CTR ipxLinkCntTxFailed | 1.3.6.1.4.1.343.6.22.4.1.1.4 | Counter | read-only | Number of packets that could not be transmitted. |
| CTR ipxLinkCntRxFiltered | 1.3.6.1.4.1.343.6.22.4.1.1.5 | Counter | read-only | Total number of received packets that were filtered. |
| CTR ipxLinkCntTxFiltered | 1.3.6.1.4.1.343.6.22.4.1.1.6 | Counter | read-only | Total number of packets to be transmitted that were filtered. |
| CTR ipxLinkCntRxTooManyHops | 1.3.6.1.4.1.343.6.22.4.1.1.7 | Counter | read-only | Total number of IPX packets that have exceeded the maximum hop count. |
| CTR ipxLinkCntRxHeaderErr | 1.3.6.1.4.1.343.6.22.4.1.1.8 | Counter | read-only | Total number of IPX packets with bad length. |
| CTR ipxLinkCntRxSapReq | 1.3.6.1.4.1.343.6.22.4.1.1.9 | Counter | read-only | Total number of IPX SAP request packets received. |
| CTR ipxLinkCntTxSapReq | 1.3.6.1.4.1.343.6.22.4.1.1.10 | Counter | read-only | Total number of IPX SAP request packets transmitted. |
| CTR ipxLinkCntRxSapResp | 1.3.6.1.4.1.343.6.22.4.1.1.11 | Counter | read-only | Total number of IPX SAP response packets received. |
| CTR ipxLinkCntTxSapReply | 1.3.6.1.4.1.343.6.22.4.1.1.12 | Counter | read-only | Total number of IPX SAP reply packets transmitted. |
| CTR ipxLinkCntRxSapInvalid | 1.3.6.1.4.1.343.6.22.4.1.1.13 | Counter | read-only | Number of invalid IPX SAP request packets. |
| CTR ipxLinkCntRxRipReq | 1.3.6.1.4.1.343.6.22.4.1.1.14 | Counter | read-only | Total number of IPX RIP request packets received. |
| CTR ipxLinkCntTxRipReq | 1.3.6.1.4.1.343.6.22.4.1.1.15 | Counter | read-only | Total number of IPX RIP request packets transmitted. |
| CTR ipxLinkCntRxRipResp | 1.3.6.1.4.1.343.6.22.4.1.1.16 | Counter | read-only | Total number of IPX RIP response packets received. |
| CTR ipxLinkCntTxRipReply | 1.3.6.1.4.1.343.6.22.4.1.1.17 | Counter | read-only | Total number of IPX RIP reply packets transmitted. |
| CTR ipxLinkCntRxRipInvalid | 1.3.6.1.4.1.343.6.22.4.1.1.18 | Counter | read-only | Number of invalid IPX RIP request packets. |
| CTR ipxLinkCntRxType20 | 1.3.6.1.4.1.343.6.22.4.1.1.19 | Counter | read-only | Total number of Type 20 propagation packet received. |
| CTR ipxLinkCntTxType20 | 1.3.6.1.4.1.343.6.22.4.1.1.20 | Counter | read-only | Total number of Type 20 propagation packet transmitted. |
| CTR ipxLinkCntType20Disc | 1.3.6.1.4.1.343.6.22.4.1.1.21 | Counter | read-only | Number of Type 20 Propagation discarded. |
| CTR ipxLinkCntNoRoute | 1.3.6.1.4.1.343.6.22.4.1.1.22 | Counter | read-only | Total number of IPX packets dropped due to unknown net number. |
| CTR ipxLinkCntRxDiscarded | 1.3.6.1.4.1.343.6.22.4.1.1.23 | Counter | read-only | Total number of discarded IPX packets. |
| CTR ipxLinkCntSpxSpoofed | 1.3.6.1.4.1.343.6.22.4.1.1.24 | Counter | read-only | Number of SPX packets spoofed. |
| CTR ipxLinkCntWatchdogSpoofed | 1.3.6.1.4.1.343.6.22.4.1.1.25 | Counter | read-only | Number of Watchdog packets spoofed. |
| CTR ipxLinkCntForwarded | 1.3.6.1.4.1.343.6.22.4.1.1.26 | Counter | read-only | Number of packets sent that were received on another interface. |
| CTR ipxLinkCntCacheHits | 1.3.6.1.4.1.343.6.22.4.1.1.27 | Counter | read-only | Number of packets that were cache forwarded. |
| CTR ipxLinkCntSPXCacheHits | 1.3.6.1.4.1.343.6.22.4.1.1.28 | Counter | read-only | Number of cache hits in SPX Spoofing Table. |
| CTR ipxLinkCntRxDefDataFltHits | 1.3.6.1.4.1.343.6.22.4.1.1.29 | Counter | read-only | Number of times a packet did not match any receive filters and the default action was used. |
| CTR ipxLinkCntTxDefDataFltHits | 1.3.6.1.4.1.343.6.22.4.1.1.30 | Counter | read-only | Number of times a packet did not match any transmit filters and the default action was used. |
| ipxLinkByteCntTable | 1.3.6.1.4.1.343.6.22.4.2 | not-accessible | This table contains link-specific byte counters. | |
| ipxLinkByteCntEntry | 1.3.6.1.4.1.343.6.22.4.2.1 | not-accessible | ||
| INT ipxLinkByteCntIpxLinkIndex | 1.3.6.1.4.1.343.6.22.4.2.1.1 | INTEGER | read-only | IPX Link index. |
| CTR ipxLinkByteCntRxTotal | 1.3.6.1.4.1.343.6.22.4.2.1.2 | Counter | read-only | Number of bytes received in total for link. |
| CTR ipxLinkByteCntTxTotal | 1.3.6.1.4.1.343.6.22.4.2.1.3 | Counter | read-only | Number of bytes transmitted in total for link. |
| CTR ipxLinkByteCntRxOther | 1.3.6.1.4.1.343.6.22.4.2.1.4 | Counter | read-only | Number of bytes received of unknown types. |
| CTR ipxLinkByteCntTxOther | 1.3.6.1.4.1.343.6.22.4.2.1.5 | Counter | read-only | Number of bytes transmitted of unknown types. |
| CTR ipxLinkByteCntRxNcp | 1.3.6.1.4.1.343.6.22.4.2.1.6 | Counter | read-only | Number of NCP bytes received. |
| CTR ipxLinkByteCntTxNcp | 1.3.6.1.4.1.343.6.22.4.2.1.7 | Counter | read-only | Number of NCP bytes transmitted. |
| CTR ipxLinkByteCntRxSpx | 1.3.6.1.4.1.343.6.22.4.2.1.8 | Counter | read-only | Number of SPX bytes received. |
| CTR ipxLinkByteCntTxSpx | 1.3.6.1.4.1.343.6.22.4.2.1.9 | Counter | read-only | Number of SPX bytes transmitted. |
| CTR ipxLinkByteCntRxRip | 1.3.6.1.4.1.343.6.22.4.2.1.10 | Counter | read-only | Number of RIP bytes received. |
| CTR ipxLinkByteCntTxRip | 1.3.6.1.4.1.343.6.22.4.2.1.11 | Counter | read-only | Number of RIP bytes transmitted. |
| CTR ipxLinkByteCntRxSap | 1.3.6.1.4.1.343.6.22.4.2.1.12 | Counter | read-only | Number of SAP bytes received. |
| CTR ipxLinkByteCntTxSap | 1.3.6.1.4.1.343.6.22.4.2.1.13 | Counter | read-only | Number of SAP bytes transmitted. |
| CTR ipxLinkByteCntRxType20 | 1.3.6.1.4.1.343.6.22.4.2.1.14 | Counter | read-only | Number of Type 20 bytes received. |
| CTR ipxLinkByteCntTxType20 | 1.3.6.1.4.1.343.6.22.4.2.1.15 | Counter | read-only | Number of Type 20 bytes transmitted. |
| CTR ipxCountRxTotal | 1.3.6.1.4.1.343.6.22.4.3 | Counter | read-only | Total number of received IPX packets. |
| CTR ipxCountTxTotal | 1.3.6.1.4.1.343.6.22.4.4 | Counter | read-only | Total number of transmitted IPX packets. |
| CTR ipxCountTxFailed | 1.3.6.1.4.1.343.6.22.4.5 | Counter | read-only | Number of packets that could not be transmitted. |
| CTR ipxCountRxFiltered | 1.3.6.1.4.1.343.6.22.4.6 | Counter | read-only | Total number of received packets that were filtered. |
| CTR ipxCountTxFiltered | 1.3.6.1.4.1.343.6.22.4.7 | Counter | read-only | Total number of packets to be transmitted that were filtered. |
| CTR ipxCountRxTooManyHops | 1.3.6.1.4.1.343.6.22.4.8 | Counter | read-only | Total number of IPX packets that have exceeded the maximum hop count. |
| CTR ipxCountRxHeaderErr | 1.3.6.1.4.1.343.6.22.4.9 | Counter | read-only | Total number of IPX packets with bad length. |
| CTR ipxCountRxSapReq | 1.3.6.1.4.1.343.6.22.4.10 | Counter | read-only | Total number of IPX SAP request packets received. |
| CTR ipxCountTxSapReq | 1.3.6.1.4.1.343.6.22.4.11 | Counter | read-only | Total number of IPX SAP request packets transmitted. |
| CTR ipxCountRxSapResp | 1.3.6.1.4.1.343.6.22.4.12 | Counter | read-only | Total number of IPX SAP response packets received. |
| CTR ipxCountTxSapReply | 1.3.6.1.4.1.343.6.22.4.13 | Counter | read-only | Total number of IPX SAP reply packets transmitted. |
| CTR ipxCountRxSapInvalid | 1.3.6.1.4.1.343.6.22.4.14 | Counter | read-only | Number of invalid IPX SAP request packets. |
| CTR ipxCountRxRipReq | 1.3.6.1.4.1.343.6.22.4.15 | Counter | read-only | Total number of IPX RIP request packets received. |
| CTR ipxCountTxRipReq | 1.3.6.1.4.1.343.6.22.4.16 | Counter | read-only | Total number of IPX RIP request packets transmitted. |
| CTR ipxCountRxRipResp | 1.3.6.1.4.1.343.6.22.4.17 | Counter | read-only | Total number of IPX RIP response packets received. |
| CTR ipxCountTxRipReply | 1.3.6.1.4.1.343.6.22.4.18 | Counter | read-only | Total number of IPX RIP reply packets transmitted. |
| CTR ipxCountRxRipInvalid | 1.3.6.1.4.1.343.6.22.4.19 | Counter | read-only | Number of invalid IPX RIP request packets. |
| CTR ipxCountRxType20 | 1.3.6.1.4.1.343.6.22.4.20 | Counter | read-only | Total number of Type 20 propagation packet received. |
| CTR ipxCountTxType20 | 1.3.6.1.4.1.343.6.22.4.21 | Counter | read-only | Total number of Type 20 propagation packet transmitted. |
| CTR ipxCountType20Disc | 1.3.6.1.4.1.343.6.22.4.22 | Counter | read-only | Number of Type 20 Propagation discarded. |
| CTR ipxCountNoRoute | 1.3.6.1.4.1.343.6.22.4.23 | Counter | read-only | Total number of IPX packets dropped due to unknownnet number. |
| CTR ipxCountRxDiscarded | 1.3.6.1.4.1.343.6.22.4.24 | Counter | read-only | Total number of discarded IPX packets. |
| CTR ipxCountSpxSpoofed | 1.3.6.1.4.1.343.6.22.4.25 | Counter | read-only | Number of SPX packets spoofed. |
| CTR ipxCountWatchdogSpoofed | 1.3.6.1.4.1.343.6.22.4.26 | Counter | read-only | Number of Watchdog packets spoofed. |
| CTR ipxCountForwarded | 1.3.6.1.4.1.343.6.22.4.27 | Counter | read-only | Number of packets sent that were received onanother interface. |
| CTR ipxCountCacheHits | 1.3.6.1.4.1.343.6.22.4.28 | Counter | read-only | Number of packets that were cache forwarded. |
| CTR ipxCountSPXCacheHits | 1.3.6.1.4.1.343.6.22.4.29 | Counter | read-only | Number of cache hits in SPX Spoofing Table. |
| ipxRip | 1.3.6.1.4.1.343.6.22.5 | |||
| ipxRipTable | 1.3.6.1.4.1.343.6.22.5.1 | not-accessible | RIP table - supplement to table in Novells MIB | |
| ipxRipEntry | 1.3.6.1.4.1.343.6.22.5.1.1 | not-accessible | ||
| OCT ipxRipNetwork | 1.3.6.1.4.1.343.6.22.5.1.1.1 | OCTET STRING | read-only | |
| INT ipxRipIpxLinkIndex | 1.3.6.1.4.1.343.6.22.5.1.1.2 | INTEGER | read-only | Network received on interface with this IPX Link index. |
| INT ipxRipIfIndex | 1.3.6.1.4.1.343.6.22.5.1.1.3 | INTEGER | read-only | Network received on interface with this interface index. |
| INT ipxRipProtocol | 1.3.6.1.4.1.343.6.22.5.1.1.4 | INTEGER | read-only | Specifies where the network entry came from. Note: local is the same as direct. |
| INT ipxRipDelay | 1.3.6.1.4.1.343.6.22.5.1.1.5 | INTEGER | read-only | Delay to destination measured in ticks (1 tick = 55 ms). |
| INT ipxRipHops | 1.3.6.1.4.1.343.6.22.5.1.1.6 | INTEGER | read-only | Number of hops to route. |
| INT ipxRipAge | 1.3.6.1.4.1.343.6.22.5.1.1.7 | INTEGER | read-only | Time in milliseconds since (re)insertion. |
| IPX ipxRipIpxAddr | 1.3.6.1.4.1.343.6.22.5.1.1.8 | IpxAddr | read-only | The route was learned from this IPX address. |
| INT ipxRipStaticCount | 1.3.6.1.4.1.343.6.22.5.1.1.9 | INTEGER | read-only | Number of other static route to this network. |
| ipxSap | 1.3.6.1.4.1.343.6.22.6 | |||
| ipxSapTable | 1.3.6.1.4.1.343.6.22.6.1 | not-accessible | SAP table - supplement to table in Novells MIB | |
| ipxSapEntry | 1.3.6.1.4.1.343.6.22.6.1.1 | not-accessible | ||
| IPX ipxSapServerAddr | 1.3.6.1.4.1.343.6.22.6.1.1.1 | IpxAddr | read-only | Address of server |
| INT ipxSapServerType | 1.3.6.1.4.1.343.6.22.6.1.1.2 | INTEGER | read-only | Service type |
| OCT ipxSapServerName | 1.3.6.1.4.1.343.6.22.6.1.1.3 | OCTET STRING | read-only | |
| INT ipxSapIpxLinkIndex | 1.3.6.1.4.1.343.6.22.6.1.1.4 | INTEGER | read-only | Service received on interface with this IPX Link index. |
| INT ipxSapIfIndex | 1.3.6.1.4.1.343.6.22.6.1.1.5 | INTEGER | read-only | Service received on interface with this interface index. |
| INT ipxSapAge | 1.3.6.1.4.1.343.6.22.6.1.1.6 | INTEGER | read-only | Time in milliseconds since (re)insertion. |
| INT ipxSapProtocol | 1.3.6.1.4.1.343.6.22.6.1.1.7 | INTEGER | read-only | Specifies how the service was learned. |
| INT ipxSapHops | 1.3.6.1.4.1.343.6.22.6.1.1.8 | INTEGER | read-only | |
| INT ipxSapStaticCount | 1.3.6.1.4.1.343.6.22.6.1.1.9 | INTEGER | read-only | Number of other static services with this name and type. |
RFC description
Manages IPX protocol configuration and statistics including routing tables, service advertising protocol, and link-specific parameters.
Start monitoring Intel routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.