| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ibmLesBusMIB | 1.3.6.1.4.1.2.6.118.1.2.1.1 | | | |
| ibmLesBusConfGroup | 1.3.6.1.4.1.2.6.118.1.2.1.1.1 | | | |
| ibmLesBusConfTable | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1 | | not-accessible | This table contains configuration information
for the LESs within the scope of the agent. |
| ibmLesBusConfEntry | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1 | | not-accessible | Each entry in this table represents a
LES. The parameters in each entry apply
to one emulated LAN served by one LES.
Objects lesLanType and lesMaxFrameSize
are also required besides lesRowStatus
during row creation. |
| INT atmDevNum | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.1 | INTEGER | read-write | Identifies ATM device to be used by LES/BUS. |
| T/F useBurnedInEsi | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.2 | TruthValue | read-write | Specifies whether a MAC Address burned into the ATM
device should be used as the End System Identifier
component of the LES/BUS ATM Address. |
| ATM configuredEsi | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.3 | AtmPrivateAddrEsi | read-only | Locally Administered End System Identifier that is to be
used as the ESI component of the LES/BUS ATM Address.
If this object is used do not use the ATM Forum elanLecAtmMask.
If both are used the last object set will take affect. |
| ATM configuredSelector | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.4 | AtmSelector | read-only | Specifies value to be used as Selector field component
of LES/BUS ATM Address.
If this object is used do not use the ATM Forum elanLecAtmMask.
If both are used the last object set will take affect. |
| INT leArpResponseDest | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5 | INTEGER | read-write | When the value is ALL_CLIENTS, LE_ARP_RESPONSE
frames initiated or forwarded by the LES are
sent to all clients on the Point-to-Multipoint
Control Distribute VCC(s). When the value is
ONE_CLIENT, LE_ARP_RESPONSE frames are sent
solely to the client that originated the
associated LE_ARP_REQUEST over the Control
Direct VCC to that client. The primary advantage
of sending LE_ARP_RESPONSE frames to all clients
is that the clients are provided an opportunity
to learn new {LAN Destination, ATM Address}
mappings by 'eavesdropping' (secondary effects
include lower LES processing requirements and
less latency introduced by the LES). The
potential disadvantage is that the benefits of
eavesdropping, if it is even performed, may not
compensate for the additional client overhead. |
| T/F use2ControlDistributeVccs | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.6 | TruthValue | read-write | When TRUE, proxy clients are placed on one
Point-to-Multipoint Control Distribute VCC
and all other clients are placed on another
Point-to-Multipoint Control Distribute VCC.
When FALSE, all clients are placed on a single
Point-to-Multipoint Control Distribute VCC.
The advantage of using two Control Distribute VCCs
is that non-proxy clients are not perturbed by
LE_ARP_REQUESTs for unregistered LAN Destinations
(the LES answers LE_ARP_REQUESTs for registered
LAN Destinations). The disadvantage is that
Control Frames destined for all clients
(LE_TOPOLOGY_REQUEST, LE_NARP_REQUEST, and
possibly LE_ARP_RESPONSE depending upon LES-BUS-12)
must be transmitted on 2 VCCs (as a related aside,
note that LE_FLUSH_RESPONSEs are sent solely to
the originator of the corresponding LE_FLUSH_REQUEST
over the Control Direct VCC to that client). |
| T/F use2MulticastForwardVccs | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.7 | TruthValue | read-write | When TRUE:
- proxy clients are placed on one Point-to-Multipoint
Multicast Forward VCC and all other clients are
placed on another Point-to-Multipoint Multicast
Forward VCC,
- all 'unknown' unicast frames and all unicast frames
for LAN Destinations registered by proxy clients
are forwarded on the Proxy Multicast Forward VCC
('unknown' unicast frames are not forwarded to
non-proxy clients),
- all unicast frames for LAN Destinations registered
by non-proxy clients are forwarded on the Multicast
Send VCC to that client, and
- multicast and broadcast frames are transmitted on
both Multicast Forward VCCs.
When FALSE:
- all clients are placed on a single
Point-to-Multipoint Multicast Forward VCC, and
- the BUS functions as a simple forwarding device
(efficient, but 'dumb') with respect to unicast
frames.
One advantage of enabling this option is a reduction in
client pertubation due to 'nuisance' unicast frames (i.e.,
unicast frames not destined for the client); proxy clients
do not receive unicast frames destined for non-proxy
clients, and non-proxy clients never receive nuisance
unicast frames. Another advantage is the reduction in
network bandwidth devoted to nuisance frames. The
potential disadvantage is that the increased processing
requirements result in a degradation of overall system
performance. |
| T/F validateBestEffortPcr | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.8 | TruthValue | read-write | When false, Best Effort Control Direct or Multicast Send
VCCs will be accepted without regard to the signalled
forward Peak Cell Rate (PCR). When true, Best Effort
VCCs will be rejected if the signalled forward PCR
exceeds the line rate of the LES/BUS ATM device.
Calls will not be rejected due to the backward PCR.
The signalled backward PCR will be honored if it does
not exceed the line rate; otherwise, transmissions to
the caller will be at line rate. |
| BAN controlDirectMaxReservedBw | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9 | Bandwidth | read-write | Defines the maximum acceptable Sustained Cell Rate (SCR)
for a Control Direct VCC; if SCR is not specified on the
incoming call, then this parameter defines the maximum
acceptable Peak Cell Rate (PCR) for a Control Direct VCC
with reserved bandwidth. This parameter is applied to
both forward and backward directions. Calls received
with Traffic Parameters specifying higher rates will be
released. If SCR is specified on the incoming call,
the call will not be rejected due to the PCR or Maximum
Burst Size. The constraint imposed by this parameter is
not applicable to BEST EFFORT connections. |
| BAN multicastSendMaxReservedBw | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.10 | Bandwidth | read-write | Defines the maximum acceptable Sustained Cell Rate (SCR)
for a Multicast Send VCC; if SCR is not specified on the
incoming call, then this parameter defines the maximum
acceptable Peak Cell Rate (PCR) for a Multicast Send VCC
with reserved bandwidth. This parameter is applied to
both forward and backward directions. Calls received
with Traffic Parameters specifying higher rates will be
released. If SCR is specified on the incoming call,
the call will not be rejected due to the PCR or Maximum
Burst Size. The constraint imposed by this parameter is
not applicable to BEST EFFORT connections. |
| ATM controlDistributeVccType | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.11 | AtmVccTrafficType | read-write | Specifies type of traffic characteristics
to be associated with Control Distribute VCC(s).
Bandwidth is not reserved for best effort traffic. |
| BAN controlDistributePcr | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.12 | Bandwidth | read-write | Specifies the Peak Cell Rate (PCR) Traffic Parameter
for the Control Distribute VCC(s). Since the Control
Distribute is a point-to-multipoint VCC, the
specified rate applies to the forward direction only. |
| BAN controlDistributeScr | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.13 | Bandwidth | read-write | Specifies the Sustained Cell Rate (SCR) Traffic
Parameter for the Control Distribute VCC(s).
Since the Control Distribute is a point-to-multipoint
VCC, the specified rate applies to the forward
direction only. If the SCR equals the PCR specified
in LES-BUS-19, the call is signalled with PCR only.
If SCR is signalled, the Maximum Burst Size traffic
parameter is set to accomodate the maximum control
frame size of 1516 bytes. |
| ATM multicastForwardVccType | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.14 | AtmVccTrafficType | read-write | Specifies type of traffic characteristics
to be associated with Multicast Forward VCC(s).
Bandwidth is not reserved for best effort traffic. |
| BAN multicastForwardPcr | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.15 | Bandwidth | read-write | Specifies the Peak Cell Rate (PCR) Traffic Parameter
for the Multicast Forward VCC(s). Since the Multicast
Multicast Forward is a point-to-multipoint
VCC, the specified rate applies to the forward
direction only. |
| BAN multicastForwardScr | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.16 | Bandwidth | read-write | Specifies the Sustained Cell Rate (SCR) Traffic
Parameter for the Multicast Forward VCC(s). Since
the Multicast Forward is a point-to-multipoint
VCC, the specified rate applies to the forward
direction only. If the SCR equals the PCR
specified in LES-BUS-22, the call is signalled
with PCR only. If SCR is signalled, the Maximum
Burst Size traffic parameter is set to accomodate
the maximum data frame size specified in
maxDataFrameSize. |
| T/F validateJoinsWithLecs | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.17 | TruthValue | read-write | Specifies whether clients that attempt to join
the ELAN must be validated by the LECS. The default
value is taken from the corresponding object in the ELAN MIB,
and it overrides the ELAN value. |
| T/F redundancyEnabled | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.18 | TruthValue | read-write | Redundancy support allows clients to be assigned to
a backup LES/BUS in the event that the primary LES/BUS
for the ELAN fails. |
| INT redundancyRole | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.19 | INTEGER | read-write | Redundancy Protocol Role. Specifies whether this LES/BUS instance
is to serve as the primary or backup LES/BUS for the ELAN. This
object is only valid when redundancyEnabled is true. If this object
is never set and redundancyEnabled has never been set to true
redundancyRole will have a value of 0. |
| ADR redundancyAtmAddr | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20 | AtmLaneAddress | read-write | ATM Address of Backup LES/BUS. Specifies the ATM address of the
backup LES/BUS for the ELAN. Currently, only the private
address formats defined by the ATM Forum are supported, there
are three private ATM address formats (Data Country Code (DCC)
Format, International Code Designator (ICD) Format, and E.164 Format)
and all are modeled after the format of an OSI Network Service Access
Point (NSAP), all three private address formats are 20 octets
(ATM_PRIVATE_ADDR_OCTETS) in length, and the most significant octet
contains an Authority and Format Identifier (AFI) field that identifies
the address format (see constants ATM_ADDR_DCC_AFI, ATM_ADDR_ICD_AFI,
and ATM_ADDR_E164_AFI), the remaining octets of the address are divided
into an Initial Domain Identifier (IDI) and a Domain Specific Part
(DSP), the IDI has specific encoding rules that may be enforced by the
configurator (see Section 5.1.3 of the ATM Forum UNI Specification). |
| T/F bmonEnabled | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.21 | TruthValue | read-write | Enable BUS Monitor for ELAN. When TRUE, host usage of the
Broadcast and Unknown Server is monitored. Periodic sampling
is performed to provide information on the top N heaviest
users of the BUS. Here, a user is defined as any MAC
address originating data frames to the BUS. Information is
available on the last sample interval. When FALSE, BUS
Monitoring is not performed. |
| INT numTopMacs | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.22 | INTEGER | read-write | Number of Top MAC Addresses to Record. Specifies the number
of MACs to be recorded with the highest quantity of sampled
frames sent to the BUS in a sample interval. |
| INT sampleDuration | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.23 | INTEGER | read-write | Number of seconds in each Sample Interval. Specifies the number
of seconds in each BUS Monitor sample interval. |
| INT interSampleTime | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.24 | INTEGER | read-write | Minutes between start of one sample and the next sample.
Specifies the number of minutes between the start of
one BUS Monitor sample interval and the start of the
next sample interval. |
| INT sampleRate | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.25 | INTEGER | read-write | Specifies the rate at which the BUS Monitor samples
frames sent to the BUS during a sample interval.
A value of 1 indicates that every frame sent to the
BUS is sampled. A value of 100 indicates that 1
out of every 100 frames sent to the BUS is sampled. |
| INT busMode | 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.26 | INTEGER | read-write | With the Fast Bus Feature the BUS can run now run in one of
three modes:
systemBusMode(1) - Frames from BUS are buffered into system memory.
All intelligent BUS mode are available in this mode.
adapterBusMode(2) - Frames received for the BUS are kept in adapter memory.
BCM is not available in this mode. On Token-Ring
all data frames are counted as multicast frames.
vccSpliceBusMode(3) - The BUS ties all Multicast Send VCCs into the
Multicast Forward VCC. Frames received for the
BUS are immediately forwarded onto the Multicast
Foward VCC without notifying the BUS. Statistics
related to frame rec/transmit are not maintained
when the Bus mode is VCC Splice. |
| ibmLesBusStatGroup | 1.3.6.1.4.1.2.6.118.1.2.1.1.2 | | | |
| ibmLesBusStatTable | 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1 | | not-accessible | This table contains all counters ???. |
| ibmLesBusStatEntry | 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1 | | not-accessible | Each entry in this table contains a LES and its counters. |
| C32 redundancyVccRefused | 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.1 | Counter32 | read-only | Number of Redundancy VCC call setup requests
rejected by the LES for any reason. |
| C32 redundancyVccReleased | 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.2 | Counter32 | read-only | Number of times a Redundancy VCC has been
released by LEC/network for any reason. |
| C32 redundancyVccFailure | 1.3.6.1.4.1.2.6.118.1.2.1.1.2.1.1.3 | Counter32 | read-only | Number of Redundancy VCC requests made by LES that failed. |
| ibmBusMonStatGroup | 1.3.6.1.4.1.2.6.118.1.2.1.1.3 | | | |
| bmonSampleInfoTable | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1 | | not-accessible | This table contains the BUS Monitor (BMON) information for the
last complete sample processed. The following information is
maintained for each BUS instance using BMON:
- Time that the last complete sample interval started.
- Duration of the sample interval.
- Number of top hosts actually recorded in the sample.
- Number of frames received during the sample interval.
- Number of frames sampled in the sample interval.
- Frame sampling rate (i.e., 1 out of N frames sampled).
Each BUS instance may have a BMON. This table is indexed by
lesConfIndex. |
| bmonSampleInfoEntry | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1 | | not-accessible | Each entry in this table contains BMON information for the
last complete sample processed for a specific BUS instance. |
| TIM bmonSampleStartTime | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.1 | TimeStamp | read-only | Timestamp for the start of the last complete BUS Monitor
sample interval. |
| C32 bmonSampleDuration | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.2 | Counter32 | read-only | Duration of the last complete sample interval. |
| C32 bmonNumTopMacs | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.3 | Counter32 | read-only | The number of top hosts actually recorded during the
last complete sample interval. |
| C32 bmonReceivedFrames | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.4 | Counter32 | read-only | The total number of frames received during the last
complete sample interval. |
| C32 bmonSampledFrames | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.5 | Counter32 | read-only | The number of frames actually sampled during the last
complete sample interval. |
| C32 bmonSamplingRate | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.1.1.6 | Counter32 | read-only | The frame sampling rate given as N where the rate
is 1 out of every N frames will be sampled. |
| bmonStatTable | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2 | | not-accessible | This table contains the BUS Monitor (BMON) counters for the top N
heaviest users of a BUS (i.e., the N MAC addresses that originate
the most data frames. Each BUS instance may have a BMON. This
table augments the bmonConfTable. |
| bmonStatEntry | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1 | | not-accessible | Each entry in this table contains BMON statistics for the top
users of the indicated BUS instance. |
| C32 bmonTopNRank | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.1 | Counter32 | read-only | Rank for the indicated host (i.e., MAC address) given
as N where 1 is the host originating the most frames. |
| MAC bmonTopNSrcMacAddr | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.2 | MacAddress | read-only | Source MAC Address for this host. |
| ADR bmonTopNLecAtmAddr | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.3 | AtmLaneAddress | read-only | Associated LEC ATM Address for this host. |
| C32 bmonTopNFramesSampled | 1.3.6.1.4.1.2.6.118.1.2.1.1.3.2.1.4 | Counter32 | read-only | Number of frames sampled from this host during last
complete sample interval. |
| ibmLesBusMIBConformance | 1.3.6.1.4.1.2.6.118.1.2.1.1.4 | | | |
| ibmLesBusMIBGroups | 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1 | | | |
| ibmLesBusCConfGroup | 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.1 | | | |
| ibmLesBusCStatGroup | 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.2 | | | |
| ibmBusMonCStatGroup | 1.3.6.1.4.1.2.6.118.1.2.1.1.4.1.3 | | | |
| ibmLesBusMIBCompliances | 1.3.6.1.4.1.2.6.118.1.2.1.1.4.2 | | | |
| ibmLesBusMIBCompliance | 1.3.6.1.4.1.2.6.118.1.2.1.1.4.2.1 | | | |
