IBM-LES-BUS-MIB :: redundancyAtmAddr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › IBM-LES-BUS-MIB › redundancyAtmAddr

redundancyAtmAddr

Module: IBM-LES-BUS-MIB

OID (symbolic): IBM-LES-BUS-MIB::redundancyAtmAddr

OID (numeric): 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20

Node type: OBJECT-TYPE

Type: AtmLaneAddress

Access: read-write

Description: ATM Address of Backup LES/BUS. Specifies the ATM address of the backup LES/BUS for the ELAN. Currently, only the private address formats defined by the ATM Forum are supported, there are three private ATM address formats (Data Country Code (DCC) Format, International Code Designator (ICD) Format, and E.164 Format) and all are modeled after the format of an OSI Network Service Access Point (NSAP), all three private address formats are 20 octets (ATM_PRIVATE_ADDR_OCTETS) in length, and the most significant octet contains an Authority and Format Identifier (AFI) field that identifies the address format (see constants ATM_ADDR_DCC_AFI, ATM_ADDR_ICD_AFI, and ATM_ADDR_E164_AFI), the remaining octets of the address are divided into an Initial Domain Identifier (IDI) and a Domain Specific Part (DSP), the IDI has specific encoding rules that may be enforced by the configurator (see Section 5.1.3 of the ATM Forum UNI Specification).

What is redundancyAtmAddr?

The 20-octet ATM address (DCC, ICD, or E.164 private format) of the backup LES/BUS for this ELAN, which an admin configures on the primary so clients know where to fail over to.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20
snmpwalk -v2c -c public <target> IBM-LES-BUS-MIB::redundancyAtmAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20.1
snmpget -v2c -c public <target> IBM-LES-BUS-MIB::redundancyAtmAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20.1 s <value>

Start monitoring IBM ATM switch/router with LES/BUS (LAN Emulation) support with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-LES-BUS-MIB::redundancyAtmAddr OID value, configure state conditions and alerts, and monitor any IBM ATM switch/router with LES/BUS (LAN Emulation) support from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmATM-ADAPTER-MIB
1.3.6.1.4.1.2.6ibmProdATM-ADAPTER-MIB
1.3.6.1.4.1.2.6.118nwaysMSSFECLIENT827x-MIB
1.3.6.1.4.1.2.6.118.1mssCommonNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2mssCmnSrvrsNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2.1mssServerLanENWAYSMSS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.118.1.2.1.1ibmLesBusMIBIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1ibmLesBusConfGroupIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1.1ibmLesBusConfTableIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1ibmLesBusConfEntryIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.20redundancyAtmAddrIBM-LES-BUS-MIB