IBM-LES-BUS-MIB :: controlDirectMaxReservedBw

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › IBM-LES-BUS-MIB › controlDirectMaxReservedBw

controlDirectMaxReservedBw

Module: IBM-LES-BUS-MIB

OID (symbolic): IBM-LES-BUS-MIB::controlDirectMaxReservedBw

OID (numeric): 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9

Node type: OBJECT-TYPE

Type: Bandwidth

Access: read-write

Description: Defines the maximum acceptable Sustained Cell Rate (SCR) for a Control Direct VCC; if SCR is not specified on the incoming call, then this parameter defines the maximum acceptable Peak Cell Rate (PCR) for a Control Direct VCC with reserved bandwidth. This parameter is applied to both forward and backward directions. Calls received with Traffic Parameters specifying higher rates will be released. If SCR is specified on the incoming call, the call will not be rejected due to the PCR or Maximum Burst Size. The constraint imposed by this parameter is not applicable to BEST EFFORT connections.

What is controlDirectMaxReservedBw?

Sets the maximum Sustained (or, if unspecified, Peak) Cell Rate the LES/BUS will accept for a reserved-bandwidth Control Direct VCC in both directions; an incoming call requesting a higher rate than this is released, so an admin raises it to accommodate busier ELAN control traffic.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9
snmpwalk -v2c -c public <target> IBM-LES-BUS-MIB::controlDirectMaxReservedBw

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9.1
snmpget -v2c -c public <target> IBM-LES-BUS-MIB::controlDirectMaxReservedBw.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9.1 s <value>

Start monitoring IBM ATM switch/router with LES/BUS (LAN Emulation) support with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-LES-BUS-MIB::controlDirectMaxReservedBw OID value, configure state conditions and alerts, and monitor any IBM ATM switch/router with LES/BUS (LAN Emulation) support from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmATM-ADAPTER-MIB
1.3.6.1.4.1.2.6ibmProdATM-ADAPTER-MIB
1.3.6.1.4.1.2.6.118nwaysMSSFECLIENT827x-MIB
1.3.6.1.4.1.2.6.118.1mssCommonNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2mssCmnSrvrsNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2.1mssServerLanENWAYSMSS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.118.1.2.1.1ibmLesBusMIBIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1ibmLesBusConfGroupIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1.1ibmLesBusConfTableIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1ibmLesBusConfEntryIBM-LES-BUS-MIB
1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.9controlDirectMaxReservedBwIBM-LES-BUS-MIB