All MIBs › IBM-LES-BUS-MIB › leArpResponseDest
leArpResponseDest
Module: IBM-LES-BUS-MIB
OID (symbolic): IBM-LES-BUS-MIB::leArpResponseDest
OID (numeric): 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: When the value is ALL_CLIENTS, LE_ARP_RESPONSE frames initiated or forwarded by the LES are sent to all clients on the Point-to-Multipoint Control Distribute VCC(s). When the value is ONE_CLIENT, LE_ARP_RESPONSE frames are sent solely to the client that originated the associated LE_ARP_REQUEST over the Control Direct VCC to that client. The primary advantage of sending LE_ARP_RESPONSE frames to all clients is that the clients are provided an opportunity to learn new {LAN Destination, ATM Address} mappings by 'eavesdropping' (secondary effects include lower LES processing requirements and less latency introduced by the LES). The potential disadvantage is that the benefits of eavesdropping, if it is even performed, may not compensate for the additional client overhead.
What is leArpResponseDest?
Controls whether LE_ARP_RESPONSE frames go to allClients(1) on the point-to-multipoint Control Distribute VCC (so other clients can eavesdrop and learn address mappings, at some added overhead) or solely to oneClient(0), the client that originated the request; an admin trades off client-side learning against control-plane load with this setting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5 snmpwalk -v2c -c public <target> IBM-LES-BUS-MIB::leArpResponseDest
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5.1 snmpget -v2c -c public <target> IBM-LES-BUS-MIB::leArpResponseDest.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> leArpResponseDest.1
Start monitoring IBM ATM switch/router with LES/BUS (LAN Emulation) support with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-LES-BUS-MIB::leArpResponseDest OID value, configure state conditions and alerts, and monitor any IBM ATM switch/router with LES/BUS (LAN Emulation) support from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6.118 | nwaysMSS | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.1 | mssCommon | NWAYSMSS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2 | mssCmnSrvrs | NWAYSMSS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1 | mssServerLanE | NWAYSMSS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.118.1.2.1.1 | ibmLesBusMIB | IBM-LES-BUS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1 | ibmLesBusConfGroup | IBM-LES-BUS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1 | ibmLesBusConfTable | IBM-LES-BUS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1 | ibmLesBusConfEntry | IBM-LES-BUS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.1.1.1.1.5 | leArpResponseDest | IBM-LES-BUS-MIB |