All MIBs › Hub-facs-prvt › fmDiagDebug
fmDiagDebug
Module: Hub-facs-prvt
OID (symbolic): Hub-facs-prvt::fmDiagDebug
OID (numeric): 1.3.6.1.4.1.22.51.5.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is for factory use only. Users must not write into this variable or improper operation can occur.
What is fmDiagDebug?
This OID switches the agent between normal-mode(1) and debug-mode(2), and the description explicitly warns it is for factory use only and that improper writes can cause incorrect operation. An admin should leave this at normal-mode(1) and only change it under vendor guidance during deep troubleshooting.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.22.51.5.4 snmpwalk -v2c -c public <target> Hub-facs-prvt::fmDiagDebug
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.22.51.5.4.1 snmpget -v2c -c public <target> Hub-facs-prvt::fmDiagDebug.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.22.51.5.4.1 i <value>
Start monitoring Legacy Fibronics hub equipment (trap-destination/system config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Hub-facs-prvt::fmDiagDebug OID value, configure state conditions and alerts, and monitor any Legacy Fibronics hub equipment (trap-destination/system config) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.22 | fibronics | EDB-snmp |
| 1.3.6.1.4.1.22.51 | fm800 | EDB-snmp |
| 1.3.6.1.4.1.22.51.5 | fmdiag | EDB-snmp |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.22.51.5.4 | fmDiagDebug | Hub-facs-prvt |