All MIBs › HUAWEI-PWE3-MIB
Organization: Huawei Technologies Co., Ltd.
Last Updated: 2007-04-12
Category: MPLS and Traffic Engineering, Pseudowire, Vendor: Huawei
Description: Huawei PWE3 (Pseudowire Emulation Edge-to-Edge) MIB for managing pseudowire connections, labels, and service parameters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-PWE3-MIB?
HUAWEI-PWE3-MIB is a Huawei enterprise MIB for managing Pseudowire Emulation Edge-to-Edge (PWE3), a technology that carries Layer 2 services (such as Ethernet, ATM, or Frame Relay) transparently over an MPLS or IP packet-switched network. No sample objects were available in the source, but based on standard PWE3 modeling it would typically expose pseudowire configuration (peer address, VC ID/label, encapsulation type) and per-pseudowire operational status and traffic counters. Administrators use it to monitor the software/service status of individual pseudowire connections, such as whether a PW is up or down and how much traffic it is carrying, which is critical for detecting a broken Layer 2 VPN service. It conceptually aligns with the IETF PW-STD-MIB/PW-TC-MIB framework though implemented as a Huawei proprietary module. It is deployed on Huawei MPLS-capable routers/switches providing Layer 2 VPN pseudowire services to carrier or enterprise customers. Engineers can download the HUAWEI-PWE3-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-PWE3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei MPLS router/switch (PWE3-capable)
Monitoring Examples
Without concrete sample object names available for this module, a specific grounded monitoring scenario referencing real objects cannot be constructed; typically an admin would poll a pseudowire table for operational status, VC label, and peer address per pseudowire entry to confirm each PW is up and passing traffic, with a down status indicating a PW failure affecting the Layer 2 VPN service.
What Can Be Monitored
- pseudowire operational status
- VC label/ID
- peer PE address
- pseudowire traffic counters
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| hwDatacomm | OBJECT-IDENTITY |
From HUAWEI-VPLS-EXT-MIB
| HWEnableValue | |
| HWL2VpnStateChangeReason | |
| HWL2VpnVcEncapsType |
From IF-MIB
| InterfaceIndexOrZero | |
| ifName | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddressType |
From P-BRIDGE-MIB
| EnabledStatus |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-MIB
| sysUpTime | OBJECT-TYPE |
From SNMPv2-SMI
| BITS | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwL2Vpn | 1.3.6.1.4.1.2011.5.25.119 | |||
| hwL2VpnPwe3 | 1.3.6.1.4.1.2011.5.25.119.4 | The HUAWEI-PWE3-MIB contains objects to manage PWE3. | ||
| hwPwe3MIBObjects | 1.3.6.1.4.1.2011.5.25.119.4.1 | |||
| hwPwe3Objects | 1.3.6.1.4.1.2011.5.25.119.4.1.1 | |||
| hwPWVcTable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1 | not-accessible | This table is the VC configuration table. Users can create or delete a VC by it. | |
| hwPWVcEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1 | not-accessible | Provides the information of a VC entry. | |
| U32 hwPWVcID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1 | Unsigned32 | not-accessible | Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. |
| HWL hwPWVcType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2 | HWL2VpnVcEncapsType | not-accessible | The type of the Virtual Circuit.This value indicate the service to be carried over this PW. |
| IPt hwPWVcPeerAddrType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3 | InetAddressType | read-create | Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only. |
| IP hwPWVcPeerAddr | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4 | IpAddress | read-create | This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcPeerAddrType is 'unknown'). |
| INT hwPWVcStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5 | INTEGER | read-only | Indicates the status of the PW in the local node. Currently, can't support 'plugout'. |
| U32 hwPWVcInboundLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6 | Unsigned32 | read-create | For ldp vc, the value will be created by system automatically. |
| U32 hwPWVcOutboundLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7 | Unsigned32 | read-create | For ldp vc, the value will be created by system automatically. |
| INT hwPWVcSwitchSign | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8 | INTEGER | read-only | The sign of switch. |
| U32 hwPWVcSwitchID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9 | Unsigned32 | read-create | Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the switch PW. |
| IPt hwPWVcSwitchPeerAddrType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10 | InetAddressType | read-create | Denotes the address type of the peer node of the switch PW. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only. |
| IP hwPWVcSwitchPeerAddr | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11 | IpAddress | read-create | This object contain the value of the peer node address of the switch PW of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwPWVcSwitchPeerAddrType is 'unknown'). |
| U32 hwPWVcSwitchInboundLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12 | Unsigned32 | read-create | For ldp vc, the value will be created by system automatically. |
| U32 hwPWVcSwitchOutboundLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13 | Unsigned32 | read-create | For ldp vc, the value will be created by system automatically. |
| U32 hwPWVcGroupID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14 | Unsigned32 | read-create | Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if pwVcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise. Currently, this value always be zero. |
| NUM hwPWVcIfIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15 | InterfaceIndexOrZero | read-create | Index of the interface (or the virtual interface) associated with the PW. |
| INT hwPWVcAcStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16 | INTEGER | read-only | Local AC status. Currently, can't support 'plugout'. |
| INT hwPWVcACOAMStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17 | INTEGER | read-only | Denotes the AC's protocol is operational or not. |
| I32 hwPWVcMtu | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18 | Integer32 | read-create | If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW. |
| HWE hwPWVcCtrlWord | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19 | HWEnableValue | read-create | If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW. |
| BIT hwPWVcVCCV | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20 | Bits | read-create | Indicates the optional VCCV capabilities of the PW. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). |
| U32 hwPWVcBandWidth | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.21 | Unsigned32 | read-create | This object indicates the bandwidth. '0' is the default value. |
| U32 hwPWVcMaxAtmCells | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22 | Unsigned32 | read-create | Indicates the max cell supported when vc type is atm. |
| OCT hwPWVcTnlPolicyName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23 | OCTET STRING | read-create | Indicates the tunnel policy name used. |
| U32 hwPWVcQoSBehaviorIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.24 | Unsigned32 | read-create | Indicates the traffic behavior Index when QOS is implemented. Currently,can't support.Return the default value is '0'. |
| STR hwPWVcExplicitPathName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.25 | DisplayString | read-create | Indicates the explicit path name set by the operator.Currently, can't support. |
| OCT hwPWVcTemplateName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26 | OCTET STRING | read-create | Indicates the PW template index referenced. |
| T/F hwPWVcSecondary | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27 | TruthValue | read-create | Indicates whether or not the secondary PW is used. |
| U32 hwPWVcUpTime | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28 | Unsigned32 | read-only | Indicates the duration when the PW keeps Up for the last time, in seconds. |
| T/F hwPWOAMSync | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29 | TruthValue | read-create | Denotes the AC and PSN are enable or not. |
| U32 hwPWVCForBfdIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30 | Unsigned32 | read-only | The index of PW for BFD. |
| U32 hwPWVcDelayTime | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31 | Unsigned32 | read-create | The reroute delay time. |
| INT hwPWVcReroutePolicy | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32 | INTEGER | read-create | Reroute policy. |
| U32 hwPWVcResumeTime | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33 | Unsigned32 | read-create | The reroute resume time. |
| HWL hwPWVcRerouteReason | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34 | HWL2VpnStateChangeReason | read-only | Last reroute reason. |
| U32 hwPWVcLastRerouteTime | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35 | Unsigned32 | read-only | Last reroute time. |
| T/F hwPWVcManualSetFault | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36 | TruthValue | read-create | Denotes the manual has been set fault or not. |
| T/F hwPWVcActive | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37 | TruthValue | read-only | Denotes the current vc is active or not. |
| NUM hwPWVcVrIfIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38 | InterfaceIndexOrZero | read-create | Denotes the VRRP interface this PW binding to. |
| U32 hwPWVcVrID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39 | Unsigned32 | read-create | Denotes the VrID this PW binding to. |
| U32 hwPWBFDDetectMultiplier | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40 | Unsigned32 | read-create | The multiple of detection time. |
| U32 hwPWBFDMinReceiveInterval | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41 | Unsigned32 | read-create | The interval of bfd messages to be received. |
| U32 hwPWBFDMinTransmitInterval | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42 | Unsigned32 | read-create | The interval of bfd messages to be sent. |
| T/F hwPWDynamicBFDDetect | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43 | TruthValue | read-create | This value indicates the capacitability to support dynamic BFD detect. |
| U32 hwPWBFDRemoteVcID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44 | Unsigned32 | read-create | In the multiple-hop model, the value of remote VC id. |
| INT hwPWEthOamType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45 | INTEGER | read-create | This value indicates the type of ETH OAM. |
| U32 hwPWCfmMaIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46 | Unsigned32 | read-only | This value indicates the current CFM MA index. |
| STR hwPWVcUpStartTime | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47 | DisplayString | read-only | Specifies the time this PW status was Up(1). |
| U32 hwPWVcUpSumTime | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48 | Unsigned32 | read-only | Indicates the accumulated time when the VC is Up, in seconds. |
| STR hwPWVcIfName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49 | DisplayString | read-only | Name of the interface (or the virtual interface) associated with the PW. |
| ROW hwPWVcRowStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51 | RowStatus | read-create | RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration. |
| U32 hwPWVcAtmPackOvertime | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52 | Unsigned32 | read-create | Specifies the AtmPackOvertime. |
| U32 hwPWVcPwJitterBufferDepth | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53 | Unsigned32 | read-create | Specifies the PwJitterBufferDepth. |
| U32 hwPWVcPwTdmEncapsulationNum | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54 | Unsigned32 | read-create | Specifies the PwTdmEncapsulationNum. |
| U32 hwPWVcPwIdleCode | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55 | Unsigned32 | read-create | Specifies the PwIdleCode. |
| U32 hwPWVcPwRtpHeader | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56 | Unsigned32 | read-create | Specifies the PwRtpHeader. |
| OCT hwPWVcSwitchTnlPolicyName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57 | OCTET STRING | read-create | Indicates the switch tunnel policy name used. |
| U32 hwPWVcCfmMdIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58 | Unsigned32 | read-only | This value indicates the current CFM MD index. |
| OCT hwPWVcCfmMaName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59 | OCTET STRING | read-create | This value indicates the current CFM MA name used. |
| OCT hwPWVcCfmMdName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60 | OCTET STRING | read-create | This value indicates the current CFM MD name used. |
| INT hwPWVcRawOrTagged | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61 | INTEGER | read-only | Specifies whether the raw or tagged is configured. |
| INT hwPWVcInterworkingType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62 | INTEGER | read-only | Specifies the interworking type of the VC entry. |
| U32 hwPWVcCir | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63 | Unsigned32 | read-create | Specifies the committed information rate, based on the VC entry. |
| U32 hwPWVcPir | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64 | Unsigned32 | read-create | Specifies the peak information rate, based on the VC entry. |
| STR hwPWVcQosProfile | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65 | DisplayString | read-create | Specifies the QoS profile's name, based on the VC entry. |
| U32 hwPWVcSwitchCir | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66 | Unsigned32 | read-create | Specifies the committed information rate, based on the switch VC entry. |
| U32 hwPWVcSwitchPir | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67 | Unsigned32 | read-create | Specifies the peak information rate, based on the switch VC entry. |
| STR hwPWVcSwitchQosProfile | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68 | DisplayString | read-create | Specifies the QoS profile's name, based on the switch VC entry. |
| T/F hwPWVcTrigger | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69 | TruthValue | read-create | Specifies whether the PW remote interface shutdown or not. |
| ENA hwPWVcEnableACOAM | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.70 | EnabledStatus | read-create | Specifies whether ACOAM detection and notification are all enabled or not. |
| NUM hwPWVcSwitchVrIfIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.71 | InterfaceIndexOrZero | read-create | Denotes the VRRP interface the switch PW binding to. |
| U32 hwPWVcSwitchVrID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.72 | Unsigned32 | read-create | Denotes the VrID the switch PW binding to. |
| INT hwPWVcQosParaFromPWT | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73 | INTEGER | read-only | This object indicates the configuration of the Qos parameters managed through command line or PW template. |
| INT hwPWVcBfdParaFromPWT | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74 | INTEGER | read-only | This object indicates the configuration of the Bfd parameters managed through command line or PW template. |
| INT hwPwVcNegotiateMode | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75 | INTEGER | read-create | This object indicates the negotiation mode of the PW on the local node. |
| T/F hwPwVcIsBypass | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76 | TruthValue | read-create | This object indicates whether the PW is the bypass PW. |
| T/F hwPwVcIsAdmin | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77 | TruthValue | read-create | This object indicates whether the PW is the administrator PW. |
| NUM hwPwVcAdminPwIfIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78 | InterfaceIndexOrZero | read-create | This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW. |
| INT hwPwVcAdminPwLinkStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79 | INTEGER | read-only | This object indicates the status of the administrator PW after it is being tracked by the service PW. |
| NUM hwPwVcSwitchAdminPwIfIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.80 | InterfaceIndexOrZero | read-create | This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW. |
| INT hwPwVcSwitchAdminPwLinkStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.81 | INTEGER | read-only | This object indicates the status of the administrator PW after it is being tracked by the switch PW. |
| NUM hwPwVcSwitchBackupAdminPwIfIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.82 | InterfaceIndexOrZero | read-create | This object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW. |
| INT hwPwVcSwitchBackupAdminPwLinkStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.83 | INTEGER | read-only | This object indicates the status of the administrator PW after it is being tracked by the switch backup PW. |
| U32 hwPwVcSwitchBackupVcId | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84 | Unsigned32 | read-create | This object indicates the VC ID of the switch backup PW. |
| IPt hwPwVcSwitchBackupVcPeerAddrType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85 | InetAddressType | read-only | This object indicates type of the IP address of the peer on the switch backup PW. Currently, only IPv4 addresss are supported. |
| IP hwPwVcSwitchBackupVcPeerAddr | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86 | IpAddress | read-create | This object indicates the IP address of the peer on the switch backup PW. |
| U32 hwPwVcSwitchBackupVcReceiveLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87 | Unsigned32 | read-only | This object indicates the inbound label of the switch backup VC. For a static VC, the value of the inbound label ranges from 16 to 1023. For a dynamic VC, the inbound label is automatically generated by the system. |
| U32 hwPwVcSwitchBackupVcSendLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88 | Unsigned32 | read-only | This object indicates the outbound label of the switch backup VC. For a static VC, the value of the outbound label ranges from 0 to 1048575. For a dynamic VC, the outbound label is automatically generated by the system. |
| OCT hwPwVcSwitchBackupVcTnlPolicyName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89 | OCTET STRING | read-create | This object indicates the name of the tunnel policy of the switch backup VC. |
| U32 hwPwVcSwitchBackupVcCir | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.90 | Unsigned32 | read-create | This object indicates the CIR of the switch backup VC. |
| U32 hwPwVcSwitchBackupVcPir | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.91 | Unsigned32 | read-create | This object indicates the PIR of the switch backup VC. |
| STR hwPwVcSwitchBackupVcQosProfile | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.92 | DisplayString | read-create | This object indicates the name of the QoS profile of the switch backup VC. |
| INT hwPwVcSlaveMasterMode | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93 | INTEGER | read-only | This object indicates whether the status of the VC is master or slave. |
| INT hwPwVcSwitchVcSlaveMasterMode | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94 | INTEGER | read-only | This object indicates whether the status of the switch VC is master or slave. |
| INT hwPwVcSwitchBackupVcSlaveMasterMode | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95 | INTEGER | read-only | This object indicates whether the status of the switch backup VC is master or slave. |
| T/F hwPwVcSwitchVcActive | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96 | TruthValue | read-only | This object indicates whether the status of the switch VC is active or not. |
| T/F hwPwVcSwitchBackupVcActive | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97 | TruthValue | read-only | This object indicates whether the status of the switch backup VC is active or not. |
| T/F hwPwVcSwitchCwTrans | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98 | TruthValue | read-create | This object indicates whether the SPE support Control Word Transparent or not,default is false. |
| OCT hwPwVcSwitchVcServiceName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.99 | OCTET STRING | read-create | This object indicates the service name of the switch VC. |
| OCT hwPwVcSwitchBackupVcServiceName | 1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.100 | OCTET STRING | read-create | This object indicates the service name of the switch backup VC. |
| hwPWVcTnlTable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.2 | not-accessible | This table is used to search the tunnel index of a VC. | |
| hwPWVcTnlEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1 | not-accessible | Provides the information of a VC tunnel entry. | |
| U32 hwPWVcTnlIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.1 | Unsigned32 | not-accessible | This object indicates the tunnel index of the VC. |
| INT hwPWVcTnlType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.2 | INTEGER | read-only | This object indicates the tunnel type. |
| U32 hwPWTnlForBfdIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.3 | Unsigned32 | read-only | This object indicates the index of LSP for BFD. |
| hwPWVcStatisticsTable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.3 | not-accessible | This table contains the Pwe3's VC packets statistics. | |
| hwPWVcStatisticsEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1 | not-accessible | Provides the information of the Pwe3's VC packets statistics. | |
| C64 hwPWVcStatisticsRcvPkts | 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.1 | Counter64 | read-only | The total number of packets received on this VC. |
| C64 hwPWVcStatisticsRcvBytes | 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.2 | Counter64 | read-only | The total number of bytes received on this VC. |
| C64 hwPWVcStatisticsSndPkts | 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.3 | Counter64 | read-only | The total number of packets sent on this VC. |
| C64 hwPWVcStatisticsSndBytes | 1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.4 | Counter64 | read-only | The total number of bytes sent on the VC. |
| hwPWRemoteVcTable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4 | not-accessible | This table provides remote PW information for each local PW. | |
| hwPWRemoteVcEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1 | not-accessible | An entry in this table is created by the agent for every PW. | |
| U32 hwPWRemoteVcID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.1 | Unsigned32 | read-only | Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element' of the remote PW. |
| HWL hwPWRemoteVcType | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.2 | HWL2VpnVcEncapsType | read-only | This value indicate the service to be carried over the remote PW. |
| INT hwPWRemoteVcStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.3 | INTEGER | read-only | Indicates the forwarding status of the remote VC. |
| U32 hwPWRemoteVcGroupID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.4 | Unsigned32 | read-only | Indicates the Group ID field of the remote PW. Currently, this value always be zero. |
| U32 hwPWRemoteVcMtu | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.5 | Unsigned32 | read-only | Indicates the supported MTU size of the remote PW. |
| HWE hwPWRemoteVcCtrlword | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.6 | HWEnableValue | read-only | Indicates the control word capability of the remote PW. |
| U32 hwPWRemoteVcMaxAtmCells | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.7 | Unsigned32 | read-only | Indicates the max cell supported of the remote PW when vctype is atm. |
| T/F hwPWRemoteVcNotif | 1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.8 | TruthValue | read-only | Indicates notification is supported by the remote PW. |
| HWE hwPWVcSwitchNotifEnable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.5 | HWEnableValue | read-write | If this object is set to enable(1), then it enables the emission of hwPWVcSwitchWtoP and hwPWVcSwitchPtoW notifications; otherwise these notifications are not emitted. The default value is disable (2). |
| HWE hwPWVcUpDownNotifEnable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.6 | HWEnableValue | read-write | This object indicates the enable sign of PW VC state change notification. The default value is disable (2). |
| HWE hwPWVcDeletedNotifEnable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.7 | HWEnableValue | read-write | This object indicates the enable sign of PW VC deletion notification. The default value is disable (2). |
| HWL hwPWVcStateChangeReason | 1.3.6.1.4.1.2011.5.25.119.4.1.1.8 | HWL2VpnStateChangeReason | accessible-for-notify | This object indicates the reason of PE VC state change. |
| U32 hwPWVcSwitchRmtID | 1.3.6.1.4.1.2011.5.25.119.4.1.1.9 | Unsigned32 | accessible-for-notify | This object indicates the VC ID of PW switch between working PW and protect PW . |
| HWL hwLdpPWStateChangeReason | 1.3.6.1.4.1.2011.5.25.119.4.1.1.10 | HWLdpPwStateChangeReason | accessible-for-notify | This object indicates the reason of LDP PW VC's state change. |
| hwPWVcTDMPerfCurrentTable | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11 | not-accessible | This table provides per TDM PW performance information. The contents of this table entry are reset to zero and gotten new information every 15 minutes. | |
| hwPWVcTDMPerfCurrentEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1 | not-accessible | An entry in this table is created by the agent for every TDM PW entry. | |
| U32 hwPWVcTDMPerfCurrentMissingPkts | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.1 | Unsigned32 | read-only | Number of missing packets (as detected via control word sequence number gaps). |
| U32 hwPWVcTDMPerfCurrentJtrBfrOverruns | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.2 | Unsigned32 | read-only | Number of times the jitter buffer was overrun. |
| U32 hwPWVcTDMPerfCurrentJtrBfrUnderruns | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.3 | Unsigned32 | read-only | Number of times a packet needed to be played out and the jitter buffer was empty. |
| U32 hwPWVcTDMPerfCurrentMisOrderDropped | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.4 | Unsigned32 | read-only | Number of packets detected out of order (via control word sequence numbers) that could not be re-ordered or could not fit in the jitter buffer. |
| U32 hwPWVcTDMPerfCurrentMalformedPkt | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.5 | Unsigned32 | read-only | Number of packets detected with unexpected size or bad headers' stack. |
| U32 hwPWVcTDMPerfCurrentESs | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.6 | Unsigned32 | read-only | The counter associated with the number of Error Seconds encountered. Any malformed packet, sequence error, LOPS, and the like are considered as Error Seconds. |
| U32 hwPWVcTDMPerfCurrentSESs | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.7 | Unsigned32 | read-only | The counter associated with the number of Severely Error Seconds encountered. |
| U32 hwPWVcTDMPerfCurrentUASs | 1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.8 | Unsigned32 | read-only | The counter associated with the number of Unavailable Seconds encountered. Any consecutive ten seconds of SES are counted as one Unavailable Seconds (UAS). |
| hwPwe3MIBTraps | 1.3.6.1.4.1.2011.5.25.119.4.1.2 | |||
| NTF hwPWVcSwitchWtoP | 1.3.6.1.4.1.2011.5.25.119.4.1.2.1 | This notification is generated when switch from working PW to protect PW happens. | ||
| NTF hwPWVcSwitchPtoW | 1.3.6.1.4.1.2011.5.25.119.4.1.2.2 | This notification is generated when switch from protect PW to working PW happens. | ||
| NTF hwPWVcDown | 1.3.6.1.4.1.2011.5.25.119.4.1.2.3 | This notification indicates the VC's state changes to down. | ||
| NTF hwPWVcUp | 1.3.6.1.4.1.2011.5.25.119.4.1.2.4 | This notification indicates the VC's state changes to up. | ||
| NTF hwPWVcDeleted | 1.3.6.1.4.1.2011.5.25.119.4.1.2.5 | This notification indicates the VC is deleted. | ||
| NTF hwPWVcBackup | 1.3.6.1.4.1.2011.5.25.119.4.1.2.6 | This notification indicates the VC's state changes to backup. | ||
| NTF hwLdpPWVcDown | 1.3.6.1.4.1.2011.5.25.119.4.1.2.7 | This notification indicates the LDP PW VC's state changes to down. | ||
| NTF hwLdpPWVcUp | 1.3.6.1.4.1.2011.5.25.119.4.1.2.8 | This notification indicates the Ldp PW VC's state changes to up. | ||
| hwSvcObjects | 1.3.6.1.4.1.2011.5.25.119.4.1.3 | |||
| hwSvcTable | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1 | not-accessible | This table is the SVC configuration table. Users can create or delete a SVC by it. | |
| hwSvcEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1 | not-accessible | Provides the information of a SVC entry. | |
| NUM hwSvcIfIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1 | InterfaceIndexOrZero | not-accessible | Index of the interface (or the virtual interface) associated with the PW. |
| U32 hwSvcID | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2 | Unsigned32 | read-create | Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. |
| HWL hwSvcType | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3 | HWL2VpnVcEncapsType | read-create | Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW. |
| IPt hwSvcPeerAddrType | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4 | InetAddressType | read-create | Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only. |
| IP hwSvcPeerAddr | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5 | IpAddress | read-create | This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable (hwSvcPeerAddrType is 'unknown'). |
| INT hwSvcStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6 | INTEGER | read-only | Indicates the status of the PW in the local node. Currently, can't support 'plugout'. |
| U32 hwSvcInboundLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7 | Unsigned32 | read-create | This object indicates the inbound label. |
| U32 hwSvcOutboundLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8 | Unsigned32 | read-create | This object indicates the outbound label. |
| U32 hwSvcGroupID | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9 | Unsigned32 | read-only | Used in the Group ID field sent to the peer PWES within the maintenance protocol used for PW setup. Applicable if SvcOwner equal 'pwIdFecSignaling' or 'l2tpControlProtocol', should be set to zero otherwise. Currently, this value always be zero. |
| INT hwSvcAcStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10 | INTEGER | read-only | Local AC status. Currently, can't support 'plugout'. |
| INT hwSvcACOAMStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11 | INTEGER | read-only | Denotes the AC's protocol is operational or not. |
| I32 hwSvcMtu | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12 | Integer32 | read-only | If not equal zero, the optional Mtu object in the signaling protocol will be sent with this value, representing the locally supported MTU size over the interface (or the virtual interface) associated with the PW.Currently, can't support.'0' is the default value. |
| HWE hwSvcCtrlWord | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13 | HWEnableValue | read-create | If signaling is used for PW establishment, this object indicates the status of the control word negotiation, and in both signaling or manual configuration indicates if CW is to be present or not for this PW. |
| BIT hwSvcVCCV | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14 | Bits | read-create | Indicates the optional VCCV capabilities of the SVC. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5) or ccAlert(1)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|cvLspping(4)|cvBfd(5). |
| U32 hwSvcBandWidth | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15 | Unsigned32 | read-create | This object indicates the bandwidth.Currently, can't support.'0' is the default value. |
| U32 hwSvcMaxAtmCells | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16 | Unsigned32 | read-create | Indicates the max cell supported when vc type is atm. |
| OCT hwSvcTnlPolicyName | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17 | OCTET STRING | read-create | Indicates the tunnel policy name used. |
| U32 hwSvcQoSBehaviorIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18 | Unsigned32 | read-create | Indicates the traffic behavior Index when QOS is implemented. Currently, can't support.'0' is the default value. |
| OCT hwSvcPWTemplateName | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19 | OCTET STRING | read-create | Indicates the PW template index referenced. |
| U32 hwSvcUpTime | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20 | Unsigned32 | read-only | Indicates the duration when the SVC keeps Up for the last time, in seconds. |
| T/F hwSvcOAMSync | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21 | TruthValue | read-only | Denotes the AC and PSN are enable or not. |
| U32 hwSvcForBfdIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22 | Unsigned32 | read-only | The index of PW for BFD.Currently, can't support.Return the default value is '0'. |
| T/F hwSvcSecondary | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23 | TruthValue | read-create | Indicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'. |
| U32 hwSvcDelayTime | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24 | Unsigned32 | read-only | The reroute delay time.Currently, can't support.Return the default value is '0'. |
| INT hwSvcReroutePolicy | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25 | INTEGER | read-only | Reroute policy.Currently, can't support.Return the default value is 'invalid(6)'. |
| U32 hwSvcResumeTime | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26 | Unsigned32 | read-only | The reroute resume time.Currently, can't support.Return the default value is '0'. |
| HWL hwSvcRerouteReason | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27 | HWL2VpnStateChangeReason | read-only | Last reroute reason.Currently, can't support.Return the default value is 'invalidReason(1)'. |
| U32 hwSvcLastRerouteTime | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28 | Unsigned32 | read-only | Last reroute time.Currently, can't support.Return the default value is '0'. |
| T/F hwSvcManualSetFault | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29 | TruthValue | read-only | Denotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'. |
| T/F hwSvcActive | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30 | TruthValue | read-only | Denotes the current vc is active or not.Currently, can't support.Return the default value is 'false'. |
| STR hwSvcUpStartTime | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31 | DisplayString | read-only | Specifies the time this PW status was Up(1). |
| U32 hwSvcUpSumTime | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32 | Unsigned32 | read-only | Indicates the accumulated time when the SVC is Up, in seconds. |
| U32 hwSvcAtmPackOvertime | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33 | Unsigned32 | read-create | Specifies the AtmPackOvertime. |
| U32 hwSvcPwJitterBufferDepth | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34 | Unsigned32 | read-create | Specifies the PwJitterBufferDepth. |
| U32 hwSvcPwTdmEncapsulationNum | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35 | Unsigned32 | read-create | Specifies the PwTdmEncapsulationNum. |
| U32 hwSvcPwIdleCode | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36 | Unsigned32 | read-create | Specifies the PwIdleCode. |
| U32 hwSvcPwRtpHeader | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37 | Unsigned32 | read-create | Specifies the PwRtpHeader. |
| INT hwSvcRawOrTagged | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38 | INTEGER | read-create | Specifies whether the VLAN tag of the SVC entry is attached or stripped. |
| INT hwSvcInterworkingType | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39 | INTEGER | read-create | Specifies the interworking type of the SVC entry. |
| U32 hwSvcCir | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40 | Unsigned32 | read-create | Specifies the committed information rate, based on the SVC entry. |
| U32 hwSvcPir | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41 | Unsigned32 | read-create | Specifies the peak information rate, based on the SVC entry. |
| STR hwSvcQosProfile | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42 | DisplayString | read-create | Specifies the QoS profile's name, based on the SVC entry. |
| ROW hwSvcRowStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51 | RowStatus | read-create | RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. Not support modifying configuration. |
| hwSvcTnlTable | 1.3.6.1.4.1.2011.5.25.119.4.1.3.2 | not-accessible | This table is used to search the tunnel index of a SVC. | |
| hwSvcTnlEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1 | not-accessible | Provides the information of a SVC tunnel entry. | |
| U32 hwSvcTnlIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.1 | Unsigned32 | not-accessible | This object indicates the tunnel index of the SVC. |
| INT hwSvcTnlType | 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.2 | INTEGER | read-only | This object indicates the tunnel type. |
| U32 hwSvcTnlForBfdIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.3 | Unsigned32 | read-only | This object indicates the index of LSP for BFD. Currently, can't support.Return the default value is '0'. |
| hwSvcStatisticsTable | 1.3.6.1.4.1.2011.5.25.119.4.1.3.3 | not-accessible | This table contains the L2vpn's SVC packets statistics. | |
| hwSvcStatisticsEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1 | not-accessible | Provides the information of the L2VPN's SVC packets Statistics. | |
| C64 hwSvcStatisticsRcvPkts | 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.1 | Counter64 | read-only | The total number of packets received on this SVC. |
| C64 hwSvcStatisticsRcvBytes | 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.2 | Counter64 | read-only | The total number of bytes received on this SVC. |
| C64 hwSvcStatisticsSndPkts | 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.3 | Counter64 | read-only | The total number of packets sent on this SVC. |
| C64 hwSvcStatisticsSndBytes | 1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.4 | Counter64 | read-only | The total number of bytes sent on the SVC. |
| HWE hwSvcSwitchNotifEnable | 1.3.6.1.4.1.2011.5.25.119.4.1.3.4 | HWEnableValue | read-write | If this object is set to enable(1), then it enables the emission of hwSvcSwitchWtoP and hwSvcSwitchPtoW notifications; otherwise these notifications are not emitted.Currently, can't support. The default value is disable (2). |
| HWE hwSvcUpDownNotifEnable | 1.3.6.1.4.1.2011.5.25.119.4.1.3.5 | HWEnableValue | read-write | This object indicates the enable sign of PW VC state change notification. The default value is disable (2). |
| HWE hwSvcDeletedNotifEnable | 1.3.6.1.4.1.2011.5.25.119.4.1.3.6 | HWEnableValue | read-write | This object indicates the enable sign of PW VC deletion notification. The default value is disable (2). |
| HWL hwSvcStateChangeReason | 1.3.6.1.4.1.2011.5.25.119.4.1.3.7 | HWL2VpnStateChangeReason | accessible-for-notify | This object indicates the reason of PE VC state change. |
| hwL2vpnSvcMIBTraps | 1.3.6.1.4.1.2011.5.25.119.4.1.4 | |||
| NTF hwSvcSwitchWtoP | 1.3.6.1.4.1.2011.5.25.119.4.1.4.1 | This notification is generated when switch from working PW to protect PW happens.Currently, can't support. | ||
| NTF hwSvcSwitchPtoW | 1.3.6.1.4.1.2011.5.25.119.4.1.4.2 | This notification is generated when switch from protect PW to working PW happens.Currently, can't support. | ||
| NTF hwSvcDown | 1.3.6.1.4.1.2011.5.25.119.4.1.4.3 | This notification indicates the SVC's state changes to down. | ||
| NTF hwSvcUp | 1.3.6.1.4.1.2011.5.25.119.4.1.4.4 | This notification indicates the SVC's state changes to up. | ||
| NTF hwSvcDeleted | 1.3.6.1.4.1.2011.5.25.119.4.1.4.5 | This notification indicates the SVC is deleted. | ||
| hwPWTemplateTable | 1.3.6.1.4.1.2011.5.25.119.4.1.5 | not-accessible | This table specifies information for configuring and status monitoring to PW tempalte. | |
| hwPWTemplateEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1 | not-accessible | A row in this table represents a pseudo wire (PW) template. It is indexed by hwPWCmdTemplateIndex, which uniquely identifying a singular tempalte. | |
| OCT hwPWTemplateName | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1 | OCTET STRING | not-accessible | The name of the PW template. Set by the operator to indicate the protocol responsible for establishing this PW. The value 'static' is used in all cases where no maintenance protocol (PW signaling) is used to set-up the PW, i.e. require configuration of entries in the PW tables including PW labels, etc. The value 'ldp' is used in case of signaling with the PWid FEC element with LDP signaling. The value 'rsvp' indicate the use of rsvp control protocol. |
| IPt hwPWTemplatePeerAddrType | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.2 | InetAddressType | read-create | Denotes the address type of the peer node. It should be set to 'unknown' if PE/PW maintenance protocol is not used and the address is unknown. Currently, support 'ipv4' only. |
| IP hwPWTemplatePeerAddr | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.3 | IpAddress | read-create | This object contain the value of the peer node address of the PW/PE maintenance protocol entity. |
| HWE hwPWTemplateCtrlword | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.4 | HWEnableValue | read-create | Indicates the control word capability of the switch PW. |
| BIT hwPWTemplateVCCV | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.5 | Bits | read-create | Indicates the optional VCCV capabilities of the PW template. According to whether the control word is enabled, the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5) or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default value is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). |
| T/F hwPWTemplateFrag | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.6 | TruthValue | read-create | Indicates whether or not fragmentaion is supported. |
| I32 hwPWTemplateBandwidth | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.7 | Integer32 | read-only | Indicates the bandwitdh when signaling protocol is rsvp. Currently, can't support.'0' is the default value. |
| OCT hwPWTemplateTnlPolicyName | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.8 | OCTET STRING | read-create | Indicates the tunnel policy name used. |
| I32 hwPWTemplateQoSBehaviorIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.9 | Integer32 | read-create | Indicates the traffic behavior Index when QOS is implemented.Currently, can't support.'0' is the default value. |
| OCT hwPWTemplateExplicitPathName | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.10 | OCTET STRING | read-create | Indicates the explicit path name set by the operator.Currently, can't support. |
| U32 hwPWTemplateBFDDetectMultiplier | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11 | Unsigned32 | read-create | The multiple of detection time. |
| U32 hwPWTemplateBFDMinReceiveInterval | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.12 | Unsigned32 | read-create | The interval of bfd messages to be received. |
| U32 hwPWTemplateBFDMinTransmitInterval | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.13 | Unsigned32 | read-create | The interval of bfd messages to be sent. |
| T/F hwPWTemplateDynamicBFDDetect | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.14 | TruthValue | read-create | This value indicates the capacitability to support dynamic BFD detect. |
| U32 hwPWTemplateMaxAtmCells | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.15 | Unsigned32 | read-create | Specifies the MaxAtmCells. |
| U32 hwPWTemplateAtmPackOvertime | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.16 | Unsigned32 | read-create | Specifies the AtmPackOvertime. |
| U32 hwPWTemplatePwJitterBufferDepth | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.17 | Unsigned32 | read-create | Specifies the PwJitterBufferDepth. |
| U32 hwPWTemplatePwTdmEncapsulationNum | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.18 | Unsigned32 | read-create | Specifies the PwTdmEncapsulationNum. |
| U32 hwPWTemplatePwIdleCode | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.19 | Unsigned32 | read-create | Specifies the PwIdleCode. |
| U32 hwPWTemplatePwRtpHeader | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.20 | Unsigned32 | read-create | Specifies the PwRtpHeader. |
| HWE hwPWTemplatePwCCSeqEnable | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.21 | HWEnableValue | read-create | Specifies the CC Sequence is enable or not. |
| U32 hwPWTemplateCir | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.22 | Unsigned32 | read-create | Specifies the committed information rate, based on the PW template entry. |
| U32 hwPWTemplatePir | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.23 | Unsigned32 | read-create | Specifies the peak information rate, based on the PW template entry. |
| STR hwPWTemplateQosProfile | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.24 | DisplayString | read-create | Specifies the QoS profile's name, based on the PW template entry. |
| ENA hwPWTemplateFlowLabel | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.25 | EnabledStatus | read-create | The value of this object identifies whether the PW FlowLabel is enabled. |
| ROW hwPWTemplateRowStatus | 1.3.6.1.4.1.2011.5.25.119.4.1.5.1.51 | RowStatus | read-create | RowStatus for this Table. Restriction: The row must be created by 'createAndGo' handle only. Handle 'createAndWait' is forbidden. |
| hwPWTemplateMIBTraps | 1.3.6.1.4.1.2011.5.25.119.4.1.6 | |||
| NTF hwPWTemplateCannotDeleted | 1.3.6.1.4.1.2011.5.25.119.4.1.6.1 | This notification indicates the PWTemplate cannot be deleted. | ||
| hwPWTableObjects | 1.3.6.1.4.1.2011.5.25.119.4.1.7 | |||
| hwPWTable | 1.3.6.1.4.1.2011.5.25.119.4.1.7.1 | not-accessible | This table indicates a PW, that is Static PW or LDP PW | |
| hwPWEntry | 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1 | not-accessible | Provides the information of a VC key entry. | |
| U32 hwPWId | 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.1 | Unsigned32 | not-accessible | Index for the conceptual row identifying a PW within this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual Circuit FEC Element'. |
| HWL hwPWType | 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.2 | HWL2VpnVcEncapsType | not-accessible | Index for the conceptual row identifying a PW within this PW Emulation table.This value indicate the service to be carried over this PW. |
| IP hwPWPeerIp | 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.3 | IpAddress | not-accessible | This object contain the value of the peer node address of the PW/PE maintenance protocol entity. This object SHOULD contain a value of all zeroes if not applicable. |
| NUM hwPWInterfaceIndex | 1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4 | InterfaceIndexOrZero | read-only | Index of the interface (or the virtual interface) associated with the PW. |
| hwPwe3MIBConformance | 1.3.6.1.4.1.2011.5.25.119.4.3 | |||
| hwPwe3MIBCompliances | 1.3.6.1.4.1.2011.5.25.119.4.3.1 | |||
| hwPwe3MIBCompliance | 1.3.6.1.4.1.2011.5.25.119.4.3.1.1 | The compliance statement for systems supporting the HUAWEI-PWE3-MIB. | ||
| hwPwe3MIBGroups | 1.3.6.1.4.1.2011.5.25.119.4.3.2 | |||
| hwPWVcGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.1 | The Pwe3's VC group. | ||
| hwPWVcTnlGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.2 | The PWE3's VC Tunnel group. | ||
| hwPWVcStatisticsGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.3 | The PWE3's VC Statistics group. | ||
| hwPWRemoteVcGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.4 | The PWE3's Remote VC group. | ||
| hwPWTemplateGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.5 | The PWE3's Template group. | ||
| hwPWNotificationControlGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.6 | The PWE3's Notification Control group. | ||
| hwPWVcStateChangeReasonGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.7 | The PWE3's Vc State Reason group. | ||
| hwPWVcNotificationGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.8 | The PWE3's VC Notification group. | ||
| hwLdpPWStateChangeReasonGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.9 | The LDP PW VC State Reason group. | ||
| hwPWVcTDMPerfCurrentGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.2.10 | The PWE3's VC TDM performance information group. | ||
| hwL2vpnSvcMIBGroups | 1.3.6.1.4.1.2011.5.25.119.4.3.3 | |||
| hwSvcGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.3.1 | The L2vpn's SVC group. | ||
| hwSvcTnlGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.3.2 | The L2vpn's SVC Tunnel group. | ||
| hwSvcStatisticsGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.3.3 | The L2vpn's SVC Statistics group. | ||
| hwSvcNotificationControlGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.3.4 | The L2vpn SVC's Notification Control group. | ||
| hwSvcStateChangeReasonGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.3.5 | The L2vpn's SVc State Reason group. | ||
| hwSvcNotificationGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.3.6 | The L2vpn's SVC Notification group. | ||
| hwL2vpnPWTableMIBGroups | 1.3.6.1.4.1.2011.5.25.119.4.3.4 | |||
| hwPWTableGroup | 1.3.6.1.4.1.2011.5.25.119.4.3.4.1 | The PW Table Group. |
RFC description
Pseudo-Wire Emulation Edge to Edge management for Layer 2 VPN connections and AC interfaces.
Start monitoring Huawei MPLS router/switch, PWE3-capable (pseudowire emulation) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.