HUAWEI-VO-H323-CALL-STAT-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-VO-H323-CALL-STAT-MIB

Organization: Huawei-3COM Technologies Co., Ltd.

Last Updated: 2004-10-20

Category: Domain: Telephony/VoIP, Domain: VoIP/Telephony, Vendor: Huawei

Description: Huawei voice H.323 call statistics MIB for tracking H.323 call setup success rates, failure causes, and quality metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-VO-H323-CALL-STAT-MIB?

HUAWEI-VO-H323-CALL-STAT-MIB is a Huawei enterprise MIB targeting voice-over-IP gateways or media gateway controllers, focused on statistics for H.323-signaled calls. As its name indicates, it is expected to expose counters and status objects for call setup attempts, successful connections, failure causes, and call quality metrics for the H.323 protocol stack. The module description and object list were not present in the available source, so specific table names cannot be confirmed, but MIBs of this class typically report software-level operational status such as call success/failure rates and active call counts rather than physical hardware sensors. It likely depends on general Huawei voice/VoIP enterprise MIB conventions and possibly the ITU-T H.323 protocol model for terminology. It would be deployed on Huawei voice gateways or softswitches in carrier or enterprise VoIP networks, and a HUAWEI-VO-H323-CALL-STAT-MIB download is available for administrators who need to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-VO-H323-CALL-STAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Huawei VoIP gateway
  • Huawei softswitch/media gateway controller

Monitoring Examples

No sample object or table names were available in the source data for this MIB, so a concrete polling example referencing real identifiers cannot be given; interpreting this module fully would require parsing the actual MIB file for its call statistics table structure.

Imported Objects

From HUAWEI-3COM-OID-MIB

voiceOBJECT-IDENTITY

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
OIDs

RFC description

Huawei voice over H.323 call statistics MIB for monitoring H225 message counts and voice call activity metrics.

Start monitoring Huawei VoIP gateway or softswitch/media gateway controller (H.323 call statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-VO-H323-CALL-STAT-MIB