All MIBs › HUAWEI-DSLAM-DHCPV6-RELAY-MIB
Organization: Huawei Technologies Co., Ltd.
Last Updated: 2011-08-19
Category: Domain: DSL, Technology: IPv6, Vendor: Huawei
Description: Huawei DSLAM DHCPv6 relay MIB for managing DHCPv6 relay agent functionality and IPv6 prefix delegation on DSLAM access platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-DSLAM-DHCPV6-RELAY-MIB?
HUAWEI-DSLAM-DHCPV6-RELAY-MIB is a Huawei proprietary MIB for DSLAM (Digital Subscriber Line Access Multiplexer) access equipment, managing DHCPv6 relay agent functionality including Layer-2 and Layer-3 relay behavior and IPv6 prefix delegation for subscriber-facing broadband access. No runtime sample objects were provided in this batch, so specific object names cannot be cited, but per the module description it governs how the DSLAM relays DHCPv6 client requests upstream and how IPv6 prefixes are delegated to attached CPE. This is a configuration/protocol-relay MIB rather than a hardware-health MIB; its monitoring value would be in confirming relay operation state and, if exposed, relay statistics/counters for DHCPv6 messages traversing the access node. It depends on standard DHCPv6 (RFC 3315) and DHCPv6 relay/prefix-delegation (RFC 3633) concepts which it implements at Layer-2 and Layer-3. Typical deployment is on Huawei DSLAM broadband access equipment in fixed-line ISP access networks providing IPv6 connectivity to subscribers. Engineers can download the HUAWEI-DSLAM-DHCPV6-RELAY-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-DSLAM-DHCPV6-RELAY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei DSLAM broadband access equipment
Monitoring Examples
No sample objects were provided for this module, so no concrete object names can be cited; typically such a relay MIB would be used to confirm relay-agent enable state and monitor forwarded DHCPv6 request/reply counts, but this cannot be verified for this specific module from the data available.
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-MIB
| huaweiMgmt | OBJECT-IDENTITY |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| RowStatus |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwDhcpv6Relay | 1.3.6.1.4.1.2011.5.111 | The MIB is used for defining Huawei's DHCPv6 attribute. It includes DHCPv6 Relay Layer-2 and Layer-3. | ||
| hwDhcpv6RelayMibObject | 1.3.6.1.4.1.2011.5.111.1 | |||
| hwDhcpv6L2StatisticsTable | 1.3.6.1.4.1.2011.5.111.1.1 | not-accessible | Queries and resets the statistics of transmitted and received DHCPv6 L2 relay packets. The index of this table is ifIndex, and the value of the index must be 0. | |
| hwDhcpv6L2StatisticsEntry | 1.3.6.1.4.1.2011.5.111.1.1.1 | not-accessible | Queries and resets the statistics of transmitted and received DHCPv6 L2 relay packets. The index of this entry is ifIndex, and the value of the index must be 0. | |
| C32 hwDhcpv6L2ReceiveSolicit | 1.3.6.1.4.1.2011.5.111.1.1.1.1 | Counter32 | read-only | Indicates the total number of received DHCPv6 solicit packets. |
| C32 hwDhcpv6L2ReceiveAdvertise | 1.3.6.1.4.1.2011.5.111.1.1.1.2 | Counter32 | read-only | Indicates the total number of received DHCPv6 advertise packets. |
| C32 hwDhcpv6L2ReceiveRequest | 1.3.6.1.4.1.2011.5.111.1.1.1.3 | Counter32 | read-only | Indicates the total number of received DHCPv6 request packets. |
| C32 hwDhcpv6L2ReceiveConfirm | 1.3.6.1.4.1.2011.5.111.1.1.1.4 | Counter32 | read-only | Indicates the total number of received DHCPv6 confirm packets. |
| C32 hwDhcpv6L2ReceiveRenew | 1.3.6.1.4.1.2011.5.111.1.1.1.5 | Counter32 | read-only | Indicates the total number of received DHCPv6 renew packets. |
| C32 hwDhcpv6L2ReceiveRebind | 1.3.6.1.4.1.2011.5.111.1.1.1.6 | Counter32 | read-only | Indicates the total number of received DHCPv6 rebind packets. |
| C32 hwDhcpv6L2ReceiveReply | 1.3.6.1.4.1.2011.5.111.1.1.1.7 | Counter32 | read-only | Indicates the total number of received DHCPv6 reply packets. |
| C32 hwDhcpv6L2ReceiveRelease | 1.3.6.1.4.1.2011.5.111.1.1.1.8 | Counter32 | read-only | Indicates the total number of received DHCPv6 release packets. |
| C32 hwDhcpv6L2ReceiveDecline | 1.3.6.1.4.1.2011.5.111.1.1.1.9 | Counter32 | read-only | Indicates the total number of received DHCPv6 decline packets. |
| C32 hwDhcpv6L2ReceiveReconfigure | 1.3.6.1.4.1.2011.5.111.1.1.1.10 | Counter32 | read-only | Indicates the total number of received DHCPv6 reconfigure packets. |
| C32 hwDhcpv6L2ReceiveInform | 1.3.6.1.4.1.2011.5.111.1.1.1.11 | Counter32 | read-only | Indicates the total number of received DHCPv6 information-request packets. |
| C32 hwDhcpv6L2ReceiveRelayForward | 1.3.6.1.4.1.2011.5.111.1.1.1.12 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-forward packets. |
| C32 hwDhcpv6L2ReceiveRelayReply | 1.3.6.1.4.1.2011.5.111.1.1.1.13 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-reply packets. |
| C32 hwDhcpv6L2ReceiveLeasequery | 1.3.6.1.4.1.2011.5.111.1.1.1.14 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery packets. |
| C32 hwDhcpv6L2ReceiveLeasequeryReply | 1.3.6.1.4.1.2011.5.111.1.1.1.15 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery-reply packets. |
| C32 hwDhcpv6L2ReceiveLeasequeryDone | 1.3.6.1.4.1.2011.5.111.1.1.1.16 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery-done packets. |
| C32 hwDhcpv6L2ReceiveLeasequeryData | 1.3.6.1.4.1.2011.5.111.1.1.1.17 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery-data packets. |
| C32 hwDhcpv6L2SentSolicit | 1.3.6.1.4.1.2011.5.111.1.1.1.18 | Counter32 | read-only | Indicates the total number of sent DHCPv6 solicit packets. |
| C32 hwDhcpv6L2SentAdvertise | 1.3.6.1.4.1.2011.5.111.1.1.1.19 | Counter32 | read-only | Indicates the total number of sent DHCPv6 advertise packets. |
| C32 hwDhcpv6L2SentRequest | 1.3.6.1.4.1.2011.5.111.1.1.1.20 | Counter32 | read-only | Indicates the total number of sent DHCPv6 request packets. |
| C32 hwDhcpv6L2SentConfirm | 1.3.6.1.4.1.2011.5.111.1.1.1.21 | Counter32 | read-only | Indicates the total number of sent DHCPv6 confirm packets. |
| C32 hwDhcpv6L2SentRenew | 1.3.6.1.4.1.2011.5.111.1.1.1.22 | Counter32 | read-only | Indicates the total number of sent DHCPv6 renew packets. |
| C32 hwDhcpv6L2SentRebind | 1.3.6.1.4.1.2011.5.111.1.1.1.23 | Counter32 | read-only | Indicates the total number of sent DHCPv6 rebind packets. |
| C32 hwDhcpv6L2SentReply | 1.3.6.1.4.1.2011.5.111.1.1.1.24 | Counter32 | read-only | Indicates the total number of sent DHCPv6 reply packets. |
| C32 hwDhcpv6L2SentRelease | 1.3.6.1.4.1.2011.5.111.1.1.1.25 | Counter32 | read-only | Indicates the total number of sent DHCPv6 release packets. |
| C32 hwDhcpv6L2SentDecline | 1.3.6.1.4.1.2011.5.111.1.1.1.26 | Counter32 | read-only | Indicates the total number of sent DHCPv6 decline packets. |
| C32 hwDhcpv6L2SentReconfigure | 1.3.6.1.4.1.2011.5.111.1.1.1.27 | Counter32 | read-only | Indicates the total number of sent DHCPv6 reconfigure packets. |
| C32 hwDhcpv6L2SentInform | 1.3.6.1.4.1.2011.5.111.1.1.1.28 | Counter32 | read-only | Indicates the total number of sent DHCPv6 information-request packets. |
| C32 hwDhcpv6L2SentRelayForward | 1.3.6.1.4.1.2011.5.111.1.1.1.29 | Counter32 | read-only | Indicates the total number of sent DHCPv6 relay-forward packets. |
| C32 hwDhcpv6L2SentRelayReply | 1.3.6.1.4.1.2011.5.111.1.1.1.30 | Counter32 | read-only | Indicates the total number of sent DHCPv6 relay-reply packets. |
| C32 hwDhcpv6L2SentLeasequery | 1.3.6.1.4.1.2011.5.111.1.1.1.31 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery packets. |
| C32 hwDhcpv6L2SentLeasequeryReply | 1.3.6.1.4.1.2011.5.111.1.1.1.32 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery-reply packets. |
| C32 hwDhcpv6L2SentLeasequeryDone | 1.3.6.1.4.1.2011.5.111.1.1.1.33 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery-done packets. |
| C32 hwDhcpv6L2SentLeasequeryData | 1.3.6.1.4.1.2011.5.111.1.1.1.34 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery-data packets. |
| C32 hwDhcpv6L2ReceiveUnknownType | 1.3.6.1.4.1.2011.5.111.1.1.1.35 | Counter32 | read-only | Indicates the total number of received DHCPv6 unknown packets. |
| C32 hwDhcpv6L2ReceiveInvalidUnicast | 1.3.6.1.4.1.2011.5.111.1.1.1.36 | Counter32 | read-only | Indicates the total number of received unicast DHCPv6 Solicit, Information-request, Confirm and Rebind packets. |
| C32 hwDhcpv6L2ReceiveOverlength | 1.3.6.1.4.1.2011.5.111.1.1.1.37 | Counter32 | read-only | Indicates the total number of received DHCPv6 packets that exceed the maximum packet length. |
| C32 hwDhcpv6L2ReceiveHopcountTooBig | 1.3.6.1.4.1.2011.5.111.1.1.1.38 | Counter32 | read-only | Indicates the total number of received DHCPv6 packets that hop count not less than 32. |
| C32 hwDhcpv6L2ReceiveUntrustRelayed | 1.3.6.1.4.1.2011.5.111.1.1.1.39 | Counter32 | read-only | Indicates the total number of received DHCPv6 untrust relayed packets. |
| C32 hwDhcpv6L2ReceiveDownstreamOnClientsidePort | 1.3.6.1.4.1.2011.5.111.1.1.1.40 | Counter32 | read-only | Indicates the total number of received DHCPv6 downstream packets from user side port. |
| C32 hwDhcpv6L2ReceiveRelayReplyWithoutOption9 | 1.3.6.1.4.1.2011.5.111.1.1.1.41 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-reply packets without option9. |
| C32 hwDhcpv6L2ReceiveRelayReplyWithoutOption18 | 1.3.6.1.4.1.2011.5.111.1.1.1.42 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-reply packets without option18. |
| C32 hwDhcpv6L2ReceiveRelayReplyWithInvalidPeerAddress | 1.3.6.1.4.1.2011.5.111.1.1.1.43 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-reply packets whose peer-addresses are not equal to the destination addresses. |
| C32 hwDhcpv6L2ReceiveRelayReplyLinkAddressNotZero | 1.3.6.1.4.1.2011.5.111.1.1.1.44 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-reply packets whose link-addresses are not the unspecified addresses. |
| INT hwDhcpv6L2StatisticsClear | 1.3.6.1.4.1.2011.5.111.1.1.1.45 | INTEGER | read-write | Resets the DHCPv6 packet statistics. Options: 1. clear(1) -resets the DHCPv6 packet statistics |
| hwDhcpv6L3StatisticsTable | 1.3.6.1.4.1.2011.5.111.1.2 | not-accessible | Queries and resets the statistics of transmitted and received DHCPv6 L3 relay packets. The index of this table is ifIndex, and the value of the index must be 0. | |
| hwDhcpv6L3StatisticsEntry | 1.3.6.1.4.1.2011.5.111.1.2.1 | not-accessible | Queries and resets the statistics of transmitted and received DHCPv6 L3 relay packets. The index of this entry is ifIndex, and the value of the index must be 0. | |
| C32 hwDhcpv6L3ReceiveSolicit | 1.3.6.1.4.1.2011.5.111.1.2.1.1 | Counter32 | read-only | Indicates the total number of received DHCPv6 solicit packets. |
| C32 hwDhcpv6L3ReceiveAdvertise | 1.3.6.1.4.1.2011.5.111.1.2.1.2 | Counter32 | read-only | Indicates the total number of received DHCPv6 advertise packets. |
| C32 hwDhcpv6L3ReceiveRequest | 1.3.6.1.4.1.2011.5.111.1.2.1.3 | Counter32 | read-only | Indicates the total number of received DHCPv6 request packets. |
| C32 hwDhcpv6L3ReceiveConfirm | 1.3.6.1.4.1.2011.5.111.1.2.1.4 | Counter32 | read-only | Indicates the total number of received DHCPv6 confirm packets. |
| C32 hwDhcpv6L3ReceiveRenew | 1.3.6.1.4.1.2011.5.111.1.2.1.5 | Counter32 | read-only | Indicates the total number of received DHCPv6 renew packets. |
| C32 hwDhcpv6L3ReceiveRebind | 1.3.6.1.4.1.2011.5.111.1.2.1.6 | Counter32 | read-only | Indicates the total number of received DHCPv6 rebind packets. |
| C32 hwDhcpv6L3ReceiveReply | 1.3.6.1.4.1.2011.5.111.1.2.1.7 | Counter32 | read-only | Indicates the total number of received DHCPv6 reply packets. |
| C32 hwDhcpv6L3ReceiveRelease | 1.3.6.1.4.1.2011.5.111.1.2.1.8 | Counter32 | read-only | Indicates the total number of received DHCPv6 release packets. |
| C32 hwDhcpv6L3ReceiveDecline | 1.3.6.1.4.1.2011.5.111.1.2.1.9 | Counter32 | read-only | Indicates the total number of received DHCPv6 decline packets. |
| C32 hwDhcpv6L3ReceiveReconfigure | 1.3.6.1.4.1.2011.5.111.1.2.1.10 | Counter32 | read-only | Indicates the total number of received DHCPv6 reconfigure packets. |
| C32 hwDhcpv6L3ReceiveInform | 1.3.6.1.4.1.2011.5.111.1.2.1.11 | Counter32 | read-only | Indicates the total number of received DHCPv6 information-request packets. |
| C32 hwDhcpv6L3ReceiveRelayForward | 1.3.6.1.4.1.2011.5.111.1.2.1.12 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-forward packets. |
| C32 hwDhcpv6L3ReceiveRelayReply | 1.3.6.1.4.1.2011.5.111.1.2.1.13 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-reply packets. |
| C32 hwDhcpv6L3ReceiveLeasequery | 1.3.6.1.4.1.2011.5.111.1.2.1.14 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery packets. |
| C32 hwDhcpv6L3ReceiveLeasequeryReply | 1.3.6.1.4.1.2011.5.111.1.2.1.15 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery-reply packets. |
| C32 hwDhcpv6L3ReceiveLeasequeryDone | 1.3.6.1.4.1.2011.5.111.1.2.1.16 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery-done packets. |
| C32 hwDhcpv6L3ReceiveLeasequeryData | 1.3.6.1.4.1.2011.5.111.1.2.1.17 | Counter32 | read-only | Indicates the total number of received DHCPv6 leasequery-data packets. |
| C32 hwDhcpv6L3SentSolicit | 1.3.6.1.4.1.2011.5.111.1.2.1.18 | Counter32 | read-only | Indicates the total number of sent DHCPv6 solicit packets. |
| C32 hwDhcpv6L3SentAdvertise | 1.3.6.1.4.1.2011.5.111.1.2.1.19 | Counter32 | read-only | Indicates the total number of sent DHCPv6 advertise packets. |
| C32 hwDhcpv6L3SentRequest | 1.3.6.1.4.1.2011.5.111.1.2.1.20 | Counter32 | read-only | Indicates the total number of sent DHCPv6 request packets. |
| C32 hwDhcpv6L3SentConfirm | 1.3.6.1.4.1.2011.5.111.1.2.1.21 | Counter32 | read-only | Indicates the total number of sent DHCPv6 confirm packets. |
| C32 hwDhcpv6L3SentRenew | 1.3.6.1.4.1.2011.5.111.1.2.1.22 | Counter32 | read-only | Indicates the total number of sent DHCPv6 renew packets. |
| C32 hwDhcpv6L3SentRebind | 1.3.6.1.4.1.2011.5.111.1.2.1.23 | Counter32 | read-only | Indicates the total number of sent DHCPv6 rebind packets. |
| C32 hwDhcpv6L3SentReply | 1.3.6.1.4.1.2011.5.111.1.2.1.24 | Counter32 | read-only | Indicates the total number of sent DHCPv6 reply packets. |
| C32 hwDhcpv6L3SentRelease | 1.3.6.1.4.1.2011.5.111.1.2.1.25 | Counter32 | read-only | Indicates the total number of sent DHCPv6 release packets. |
| C32 hwDhcpv6L3SentDecline | 1.3.6.1.4.1.2011.5.111.1.2.1.26 | Counter32 | read-only | Indicates the total number of sent DHCPv6 decline packets. |
| C32 hwDhcpv6L3SentReconfigure | 1.3.6.1.4.1.2011.5.111.1.2.1.27 | Counter32 | read-only | Indicates the total number of sent DHCPv6 reconfigure packets. |
| C32 hwDhcpv6L3SentInform | 1.3.6.1.4.1.2011.5.111.1.2.1.28 | Counter32 | read-only | Indicates the total number of sent DHCPv6 information-request packets. |
| C32 hwDhcpv6L3SentRelayForward | 1.3.6.1.4.1.2011.5.111.1.2.1.29 | Counter32 | read-only | Indicates the total number of sent DHCPv6 relay-forward packets. |
| C32 hwDhcpv6L3SentRelayReply | 1.3.6.1.4.1.2011.5.111.1.2.1.30 | Counter32 | read-only | Indicates the total number of sent DHCPv6 relay-reply packets. |
| C32 hwDhcpv6L3SentLeasequery | 1.3.6.1.4.1.2011.5.111.1.2.1.31 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery packets. |
| C32 hwDhcpv6L3SentLeasequeryReply | 1.3.6.1.4.1.2011.5.111.1.2.1.32 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery-reply packets. |
| C32 hwDhcpv6L3SentLeasequeryDone | 1.3.6.1.4.1.2011.5.111.1.2.1.33 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery-done packets. |
| C32 hwDhcpv6L3SentLeasequeryData | 1.3.6.1.4.1.2011.5.111.1.2.1.34 | Counter32 | read-only | Indicates the total number of sent DHCPv6 leasequery-data packets. |
| C32 hwDhcpv6L3ReceiveUnknownType | 1.3.6.1.4.1.2011.5.111.1.2.1.35 | Counter32 | read-only | Indicates the total number of received DHCPv6 unknown packets. |
| C32 hwDhcpv6L3ReceiveInvalidUnicast | 1.3.6.1.4.1.2011.5.111.1.2.1.36 | Counter32 | read-only | Indicates the total number of received unicast DHCPv6 Solicit, Information-request, Confirm and Rebind packets. |
| C32 hwDhcpv6L3ReceiveInvalidSourceAddress | 1.3.6.1.4.1.2011.5.111.1.2.1.37 | Counter32 | read-only | Indicates the total number of received DHCPv6 packets whose source address is LLA and is not filled with zero in its bits 16 to 31. |
| C32 hwDhcpv6L3ReceiveOverlength | 1.3.6.1.4.1.2011.5.111.1.2.1.38 | Counter32 | read-only | Indicates the total number of received DHCPv6 packets that exceed the maximum packet length. |
| C32 hwDhcpv6L3ReceiveHopcountTooBig | 1.3.6.1.4.1.2011.5.111.1.2.1.39 | Counter32 | read-only | Indicates the total number of received DHCPv6 packets that hop count not less than 32. |
| C32 hwDhcpv6L3ReceiveUntrustRelayed | 1.3.6.1.4.1.2011.5.111.1.2.1.40 | Counter32 | read-only | Indicates the total number of received DHCPv6 untrust relayed packets. |
| C32 hwDhcpv6L3ReceiveDownstreamOnClientsidePort | 1.3.6.1.4.1.2011.5.111.1.2.1.41 | Counter32 | read-only | Indicates the total number of received DHCPv6 downstream packets from user side port. |
| C32 hwDhcpv6L3ReceiveRelayReplyWithoutOption9 | 1.3.6.1.4.1.2011.5.111.1.2.1.42 | Counter32 | read-only | Indicates the total number of received DHCPv6 relay-reply packets without option9. |
| INT hwDhcpv6L3StatisticsClear | 1.3.6.1.4.1.2011.5.111.1.2.1.43 | INTEGER | read-write | Resets the DHCPv6 packet statistics. Options: 1. clear(1) -resets the DHCPv6 packet statistics |
| hwDhcpv6RelayConfigTable | 1.3.6.1.4.1.2011.5.111.1.3 | not-accessible | Queries and sets the global config of DHCPv6 relay, including dhcpv6 relay mode, dhcpv6 option and dhcpv6 max-length. The index of this table is ifIndex, and the value of the index must be 0. | |
| hwDhcpv6RelayConfigEntry | 1.3.6.1.4.1.2011.5.111.1.3.1 | not-accessible | Queries and sets the global config of DHCPv6 relay, including dhcpv6 relay mode, dhcpv6 option and dhcpv6 max-length. The index of this entry is ifIndex, and the value of the index must be 0. | |
| INT hwDhcpv6RelayMode | 1.3.6.1.4.1.2011.5.111.1.3.1.1 | INTEGER | read-write | Queries and sets DHCPv6 forwarding mode of the system. Options: 1. layer2(1) -indicates dhcpv6 L2 mode 2. layer3(2) -indicates dhcpv6 L3 mode Default: layer2(1) |
| INT hwDhcpv6OptionStatus | 1.3.6.1.4.1.2011.5.111.1.3.1.2 | INTEGER | read-write | Queries and sets DHCPv6 option switch status. Options: 1. enable(1) -indicates that DHCPv6 option function is enbled 2. disable(2) -indicates that DHCPv6 option function is disabled Default: disable(2) |
| I32 hwDhcpv6MaxLenAppendOption | 1.3.6.1.4.1.2011.5.111.1.3.1.3 | Integer32 | read-write | Indicates the allowable maximum length of a DHCPv6 packet. Range: 500-1500 Unit: byte Default: 1500 bytes |
| INT hwDhcpv6RelayInterfaceSrcipv6 | 1.3.6.1.4.1.2011.5.111.1.3.1.4 | INTEGER | read-write | The mode for the Layer 3 DHCPv6 relay to fill in the source IPv6 address of the packet.When hwDhcpv6RelayInterfaceSrcipv6 is in loopback mode, hwDhcpv6RelayInterfaceSrcipv6LoopbackIfIndex must be issued together. Data type: integer Options: 1. receive(1) -Means to fill in the IPv6 address of the receive interface as the source IPv6 address of the Relay-Forward packet 2. send(2) -Means to fill in the IPv6 address of the send interface as the source IPv6 address of the Relay-Forward packet 3. loopback(3) -Means to fill in the IPv6 address of the loopback interface as the source IPv6 address of the Relay-Forward packet Default: send(2) |
| I32 hwDhcpv6RelayInterfaceSrcipv6LoopbackIfIndex | 1.3.6.1.4.1.2011.5.111.1.3.1.5 | Integer32 | read-write | It is the loopback interface ID when the mode for the Layer 3 DHCPv6 relay to fill in the source IPv6 address of the packet is loopback, and is the invalid value -1 when the mode is not loopback. Range: -1-31 Default: -1 |
| hwDhcpv6OptionForwardTable | 1.3.6.1.4.1.2011.5.111.1.4 | not-accessible | Queries and sets DHCPv6 option permit-forwarding switch. The indexes of this table are ifIndex and hwDhcpv6XponOntIndex. | |
| hwDhcpv6OptionForwardEntry | 1.3.6.1.4.1.2011.5.111.1.4.1 | not-accessible | Queries and sets DHCPv6 option permit-forwarding switch. The indexes of this entry are ifIndex and hwDhcpv6XponOntIndex. | |
| I32 hwDhcpv6XponOntIndex | 1.3.6.1.4.1.2011.5.111.1.4.1.1 | Integer32 | not-accessible | ONT index The ONT index should be set to 2147483647 when the ifIndex indicates that the port type is not xPON. |
| INT hwDhcpv6OptionForward | 1.3.6.1.4.1.2011.5.111.1.4.1.2 | INTEGER | read-write | Queries and sets DHCPv6 option permit-forwarding switch status. Options: 1. enable(1) -indicates that DHCPv6 option permit-forwarding function is enbled 2. disable(2) -indicates that DHCPv6 option permit-forwarding function is disabled Default: enable(1) |
| hwDhcpv6GroupTable | 1.3.6.1.4.1.2011.5.111.1.5 | not-accessible | Describes the DHCPv6 server group, including IPv6 addresses of each DHCPv6 server and interfaces that connects to each DHCPv6 server in each group. It supports the create, modify, delete, and query operations. The index of this table is hwDhcpv6GroupID. | |
| hwDhcpv6GroupEntry | 1.3.6.1.4.1.2011.5.111.1.5.1 | not-accessible | Describes the DHCPv6 server group, including IPv6 addresses of each DHCPv6 server and interfaces that connects to each DHCPv6 server in each group. It supports the create, modify, delete, and query operations. The index of this entry is hwDhcpv6GroupID. | |
| I32 hwDhcpv6GroupID | 1.3.6.1.4.1.2011.5.111.1.5.1.1 | Integer32 | read-only | Indicates the index of the DHCPv6 server group. Range: 0-19 |
| IPt hwIpDhcpv6ServerAddrType1 | 1.3.6.1.4.1.2011.5.111.1.5.1.2 | InetAddressType | read-write | Indicates the IPv6 address type of the first server in the DHCPv6 server group. Options: 1. unknown(0) -indicates that DHCPv6 server address is not configurated. It is only used in the query operation. 2. ipv6(2) -indicates that DHCPv6 server address type is ipv6. |
| IP hwIpDhcpv6ServerAddr1 | 1.3.6.1.4.1.2011.5.111.1.5.1.3 | InetAddress | read-write | Indicates the IPv6 address of the first server in the DHCPv6 server group. It must be a valid unicast IPv6 address and the interface must be configured when the IPv6 address is LLA. |
| I32 hwIfindexDhcpv6ServerInterface1 | 1.3.6.1.4.1.2011.5.111.1.5.1.4 | Integer32 | read-write | Indicates the interface that connects to the first server in the DHCPv6 server group. The value of this leaf is VLAN ID. It must be configured when the IPv6 address is LLA and cannot be configured when the IPv6 address is GUA. If the interface that connects to the first server is not configured, the value of this leaf is -1. Range: -1, 1-4093 |
| IPt hwIpDhcpv6ServerAddrType2 | 1.3.6.1.4.1.2011.5.111.1.5.1.5 | InetAddressType | read-write | Indicates the IPv6 address type of the second server in the DHCPv6 server group. Options: 1. unknown(0) -indicates that DHCPv6 server address is not configurated. It is only used in the query operation. 2. ipv6(2) -indicates that DHCPv6 server address type is ipv6. |
| IP hwIpDhcpv6ServerAddr2 | 1.3.6.1.4.1.2011.5.111.1.5.1.6 | InetAddress | read-write | Indicates the IPv6 address of the second server in the DHCPv6 server group. It must be a valid unicast IPv6 address and the interface must be configured when the IPv6 address is LLA. |
| I32 hwIfindexDhcpv6ServerInterface2 | 1.3.6.1.4.1.2011.5.111.1.5.1.7 | Integer32 | read-write | Indicates the interface that connects to the second server in the DHCPv6 server group. The value of this leaf is VLAN ID. It must be configured when the IPv6 address is LLA and cannot be configured when the IPv6 address is GUA. If the interface that connects to the second server is not configured, the value of this leaf is -1. Range: -1, 1-4093 |
| IPt hwIpDhcpv6ServerAddrType3 | 1.3.6.1.4.1.2011.5.111.1.5.1.8 | InetAddressType | read-write | Indicates the IPv6 address type of the third server in the DHCPv6 server group. Options: 1. unknown(0) -indicates that DHCPv6 server address is not configurated. It is only used in the query operation. 2. ipv6(2) -indicates that DHCPv6 server address type is ipv6. |
| IP hwIpDhcpv6ServerAddr3 | 1.3.6.1.4.1.2011.5.111.1.5.1.9 | InetAddress | read-write | Indicates the IPv6 address of the third server in the DHCPv6 server group. It must be a valid unicast IPv6 address and the interface must be configured when the IPv6 address is LLA. |
| I32 hwIfindexDhcpv6ServerInterface3 | 1.3.6.1.4.1.2011.5.111.1.5.1.10 | Integer32 | read-write | Indicates the interface that connects to the third server in the DHCPv6 server group. The value of this leaf is VLAN ID. It must be configured when the IPv6 address is LLA and cannot be configured when the IPv6 address is GUA. If the interface that connects to the third server is not configured, the value of this leaf is -1. Range: -1, 1-4093 |
| IPt hwIpDhcpv6ServerAddrType4 | 1.3.6.1.4.1.2011.5.111.1.5.1.11 | InetAddressType | read-write | Indicates the IPv6 address type of the fourth server in the DHCPv6 server group. Options: 1. unknown(0) -indicates that DHCPv6 server address is not configurated. It is only used in the query operation. 2. ipv6(2) -indicates that DHCPv6 server address type is ipv6. |
| IP hwIpDhcpv6ServerAddr4 | 1.3.6.1.4.1.2011.5.111.1.5.1.12 | InetAddress | read-write | Indicates the IPv6 address of the fourth server in the DHCPv6 server group. It must be a valid unicast IPv6 address and the interface must be configured when the IPv6 address is LLA. |
| I32 hwIfindexDhcpv6ServerInterface4 | 1.3.6.1.4.1.2011.5.111.1.5.1.13 | Integer32 | read-write | Indicates the interface that connects to the fourth server in the DHCPv6 server group. The value of this leaf is VLAN ID. It must be configured when the IPv6 address is LLA and cannot be configured when the IPv6 address is GUA. If the interface that connects to the fourth server is not configured, the value of this leaf is -1. Range: -1, 1-4093 |
| ROW hwDhcpv6RowStatus | 1.3.6.1.4.1.2011.5.111.1.5.1.14 | RowStatus | read-write | Row status, used for configuring the DHCPv6 server group. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a DHCPv6 server group 3. destroy(6) -delete a DHCPv6 server group To create a DHCPv6 server group, specify the index, hwIpDhcpv6ServerAddrType1 and leaf hwIpDhcpv6ServerAddr1(other leaves are optional), set hwDhcpv6RowStatus to createAndGo, and perform the set operation. To modify a DHCPv6 server group, specify the index, hwIpDhcpv6ServerAddrType1 and leaf hwIpDhcpv6ServerAddr1(other leaves are optional), and perform the set operation. To delete a DHCPv6 server group, specify index hwDhcpv6GroupID, set hwDhcpv6RowStatus to destroy(6), and perform the set operation. In the query operation, the value of this leaf is always active(1). |
| hwDhcpv6ToL3IfTable | 1.3.6.1.4.1.2011.5.111.1.6 | not-accessible | Describes the binding between the VLAN interface and the DHCPv6 server group. It supports the create, query, and modify operations. The index of this table is hwDhcpv6ToL3VlanIfIndex. | |
| hwDhcpv6ToL3IfEntry | 1.3.6.1.4.1.2011.5.111.1.6.1 | not-accessible | Describes the binding between the VLAN interface and the DHCPv6 server group. It supports the create, query, and modify operations. The index of this entry is hwDhcpv6ToL3VlanIfIndex. | |
| I32 hwDhcpv6ToL3VlanIfIndex | 1.3.6.1.4.1.2011.5.111.1.6.1.1 | Integer32 | read-only | Indicates the VLAN bound to the DHCPv6 server group. It uses hwVlanInterfaceID of hwVlanInterfaceTable. Range: 1-4093 |
| I32 hwDhcpv6ToL3GroupId | 1.3.6.1.4.1.2011.5.111.1.6.1.2 | Integer32 | read-write | Indicates the corresponding DHCPv6 server group of the VLAN interface. Range: 0-19 In the configuration, if the value of hwDhcpv6ToL3GroupId is in the range of 0-19, ensure that the server group corresponding to this ID exists. |
| ROW hwDhcpv6ToL3RowStatus | 1.3.6.1.4.1.2011.5.111.1.6.1.3 | RowStatus | read-create | Indicates the row status, used to configure the corresponding DHCPv6 server group of the VLAN interface. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -create a binding between the VLAN interface and the DHCPv6 server group 3. destroy(6) -delete a binding between the VLAN interface and the DHCPv6 server group Creates the binding between the VLAN interface and the DHCPv6 server group. Specify the hwDhcpv6ToL3VlanIfIndex and hwDhcpv6ToL3GroupId, set hwDhcpv6ToL3RowStatus to createAndGo(4), and perform the set operation. In the query operation, the value of this leaf is always active(1). Modifies the binding between the VLAN interface and the DHCPv6 server group. Specify the hwDhcpv6ToL3VlanIfIndex and hwDhcpv6ToL3GroupId, and perform the set operation. Deletes the binding between the VLAN interface and the DHCPv6 server group, Specify the hwDhcpv6ToL3VlanIfIndex, set hwDhcpv6ToL3RowStatus to destroy(6), and perform the set operation. |
RFC description
Manages DHCPv6 relay configuration including Layer-2 and Layer-3 relay statistics and server settings on Huawei DSLAM devices.
Start monitoring Huawei DSLAM broadband access equipment (DHCPv6 relay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.