All MIBs › HUAWEI-DSLAM-DHCPV6-RELAY-MIB › hwDhcpv6RelayInterfaceSrcipv6
hwDhcpv6RelayInterfaceSrcipv6
Module: HUAWEI-DSLAM-DHCPV6-RELAY-MIB
OID (symbolic): HUAWEI-DSLAM-DHCPV6-RELAY-MIB::hwDhcpv6RelayInterfaceSrcipv6
OID (numeric): 1.3.6.1.4.1.2011.5.111.1.3.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The mode for the Layer 3 DHCPv6 relay to fill in the source IPv6 address of the packet.When hwDhcpv6RelayInterfaceSrcipv6 is in loopback mode, hwDhcpv6RelayInterfaceSrcipv6LoopbackIfIndex must be issued together. Data type: integer Options: 1. receive(1) -Means to fill in the IPv6 address of the receive interface as the source IPv6 address of the Relay-Forward packet 2. send(2) -Means to fill in the IPv6 address of the send interface as the source IPv6 address of the Relay-Forward packet 3. loopback(3) -Means to fill in the IPv6 address of the loopback interface as the source IPv6 address of the Relay-Forward packet Default: send(2)
What is hwDhcpv6RelayInterfaceSrcipv6?
This selects which IPv6 address the Layer-3 DHCPv6 relay uses as the source address of the Relay-Forward packets it sends: the address of the interface that received the client's packet (receive), the address of the interface that sends the relayed packet on (send, the default), or a fixed loopback interface's address (loopback). When set to loopback, hwDhcpv6RelayInterfaceSrcipv6LoopbackIfIndex must also be configured to say which loopback interface to use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2011.5.111.1.3.1.4 snmpwalk -v2c -c public <target> HUAWEI-DSLAM-DHCPV6-RELAY-MIB::hwDhcpv6RelayInterfaceSrcipv6
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2011.5.111.1.3.1.4.1 snmpget -v2c -c public <target> HUAWEI-DSLAM-DHCPV6-RELAY-MIB::hwDhcpv6RelayInterfaceSrcipv6.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2011.5.111.1.3.1.4.1 i <value>
Start monitoring Huawei DSLAM broadband access equipment (DHCPv6 relay) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HUAWEI-DSLAM-DHCPV6-RELAY-MIB::hwDhcpv6RelayInterfaceSrcipv6 OID value, configure state conditions and alerts, and monitor any Huawei DSLAM broadband access equipment (DHCPv6 relay) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2011 | huawei | EXPERTV2-MIB |
| 1.3.6.1.4.1.2011.5 | huaweiMgmt | HUAWEI-3COM-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2011.5.111 | hwDhcpv6Relay | HUAWEI-DSLAM-DHCPV6-RELAY-MIB |
| 1.3.6.1.4.1.2011.5.111.1 | hwDhcpv6RelayMibObject | HUAWEI-DSLAM-DHCPV6-RELAY-MIB |
| 1.3.6.1.4.1.2011.5.111.1.3 | hwDhcpv6RelayConfigTable | HUAWEI-DSLAM-DHCPV6-RELAY-MIB |
| 1.3.6.1.4.1.2011.5.111.1.3.1 | hwDhcpv6RelayConfigEntry | HUAWEI-DSLAM-DHCPV6-RELAY-MIB |
| 1.3.6.1.4.1.2011.5.111.1.3.1.4 | hwDhcpv6RelayInterfaceSrcipv6 | HUAWEI-DSLAM-DHCPV6-RELAY-MIB |