HPN-ICF-L4RDT-MIB

All MIBs › HPN-ICF-L4RDT-MIB

Last Updated: 2004-09-21

Category: Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Layer 4 redirect (L4RDT) policy-based traffic steering to services on HP/Comware network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-L4RDT-MIB?

HPN-ICF-L4RDT-MIB is an H3C/HPE Networking (ICF) proprietary MIB implementing Layer 4 Redirect, which transparently redirects matching client traffic (e.g., HTTP) to a local service such as a captive portal. Its redirect-cache table, keyed by IP address, records redirection status, port, row status, MAC address, VLAN, and TCP port, an IP-exclusion table excludes specific addresses/masks from redirection, and a VLAN table scopes redirection to specific VLANs, alongside free-entry counters for each table. As a configuration/status MIB it lets an administrator confirm which client sessions are currently being Layer-4-redirected and which addresses/VLANs are excluded. It is deployed on H3C/HPE Networking (ICF-based) devices running Layer 4 Redirect. Engineers can download the HPN-ICF-L4RDT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-L4RDT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/HPE Networking (ICF-based) devices (Layer 4 Redirect)

Monitoring Examples

An administrator checks hpnicfL4RedirectCacheRedirectionStatus to confirm a specific client session is being correctly redirected to a captive portal on an H3C/HPE ICF device.

What Can Be Monitored

Layer 4 redirect session status and exclusion configuration

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfL4RedirectFreeCacheEntries OID:

Select an H3C/HPE Networking (ICF-based) device (Layer 4 Redirect/captive portal) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfL4RedirectFreeCacheEntries into the Find box to locate it in the OID tree, then select it and click OK. This object indicates the number of entries that may still be added to the hpnicfL4RedirectCacheTable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfL4Redirect	1.3.6.1.4.1.11.2.14.11.15.2.10			See description above
hpnicfL4RedirectCacheTable	1.3.6.1.4.1.11.2.14.11.15.2.10.1		not-accessible	This table contains an entry for each Web Cache device that this unit is aware of.
hpnicfL4RedirectCacheEntry	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1		not-accessible	Each row specifies a known Web Cache device.
IP hpnicfL4RedirectCacheIpAddress	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.1	IpAddress	not-accessible	This object specifies the IP address of the Web Cache device.
INT hpnicfL4RedirectCacheRedirectionStatus	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.2	INTEGER	read-only	This object returns the current state of traffic redirection to the cache. If redirection is disabled, this object shall return disabledNotRedirecting(1). If a unit cannot be selected to perform the cache health check, this object shall return enabledNoHealthChecker(2). If the software is determining if the cache is able to do redirection(this will happen when the redirection state transitions from disabled to enabled), this object shall return enabledHealthChecking(3). If the cache health check succeeded but the hardware is unable to support redirection to the cache port, this object shall return enabledHealthCheckOKNotRedirecting(4). If the latest health check of the cache has failed, this object shall return enabledHealthCheckFailed(5). If the cache is in use and traffic is being redirected to it, this object shall return enabledRedirecting(6). The default value is disabledNotRedirecting(1).
INT hpnicfL4RedirectCachePort	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.3	INTEGER	read-create	This object stores the ifIndex that identifies the port or link aggregation which provides the connection that leads to the cache. If only manual cache configuration is supported, this value must be supplied. The method of cache configuration can be ascertained by the presence or absence of the L4 manual cache configuration id within the 3com-352 MIB. The default value is 0.
ROW hpnicfL4RedirectCacheRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.4	RowStatus	read-create	This object is used to create and remove Web Cache entries. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent row shall create a row with default values and shall set the row to active(1). If the row already exists, it shall be an error. Writing createAndWait(5) to the RowStatus of a non-existent row shall create a row with default values and shall set the row to notInService(2). If the row already exists, it shall be an error. Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error. Writing notInService(2) to the RowStatus of an existing row shall change the value of that row to notInService(2). Writing notInService(2) to the RowStatus of an existing row that is already notInService(2) shall not cause an error, the row shall remain notInService(2). If the row does not exist, it shall be an error. Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed. Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error. If the user does not supply values for the necessary objects, default values will be supplied. Attempts to create more entries than the hardware can support shall be rejected.
MAC hpnicfL4RedirectCacheMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.5	MacAddress	read-create	This object defines the MAC address of the attached Web cache device. If only manual configuration of the cache is supported, this value must be supplied. The method of cache configuration can be ascertained by the presence or absence of the L4 manual cache configuration id within the 3com-352 MIB. The default value is 0.
INT hpnicfL4RedirectCacheVlan	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.6	INTEGER	read-create	This object specifies the VLAN which the cache port belongs to.
INT hpnicfL4RedirectCacheTcpPort	1.3.6.1.4.1.11.2.14.11.15.2.10.1.1.7	INTEGER	read-create	This object specifies the TCP port number that is being redirected
hpnicfL4RedirectIpExclusionTable	1.3.6.1.4.1.11.2.14.11.15.2.10.2		not-accessible	This table lists the IP addresses and subnetworks that Web Cache redirection is not supported for. Some devices may not support addition to this table.
hpnicfL4RedirectIpExclusionEntry	1.3.6.1.4.1.11.2.14.11.15.2.10.2.1		not-accessible	Each row contains an IP address or a IP subnetwork that is being excluded from the redirection.
IP hpnicfL4RedirectIpExclusionIpAddress	1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.1	IpAddress	not-accessible	This object specifies the IP address or the subnetwork address that is to be excluded.
INT hpnicfL4RedirectIpExclusionMaskLen	1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.2	INTEGER	read-create	This object provides the number of bits in the subnetwork mask. This mask shall be applied to the excludeIP address to determine the subnetwork that is to be excluded. A value of 32 implies that the excludeIP address refers to an individual host. The default value is 32.
ROW hpnicfL4RedirectIpExclusionRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.10.2.1.3	RowStatus	read-create	This object is used to add rows to the Exclusion Table. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent row shall create a new row. The new row shall be active(1). If the row exists, it shall be an error. Writing createAndWait(5) to the RowStatus of a non-existent row or to an existent row shall be an error. Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error. Writing notInService(2) to the RowStatus of an existing row shall change the value of that row to notInService(2). Writing notInService(2) to the RowStatus of an existing row that is already notInService(2) shall not cause an error, the row shall remain notInService(2). If the row does not exist, it shall be an error. Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed. Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error. Attempts to create more entries than the hardware can support shall be rejected.
hpnicfL4RedirectVlanTable	1.3.6.1.4.1.11.2.14.11.15.2.10.3		not-accessible	This table contains a row for each VLAN of the packet which need to be redirected to the Web cache.
hpnicfL4RedirectVlanEntry	1.3.6.1.4.1.11.2.14.11.15.2.10.3.1		not-accessible	Each row specifies a VLAN of the packet which need to be redirected to the Web cache.
INT hpnicfL4RedirectVlanID	1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.1	INTEGER	not-accessible	This object specifies the VLAN ID of the packet which need to be redirected to the Web cache.
ROW hpnicfL4RedirectVlanRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.2	RowStatus	read-create	This object allows ports to be added and removed from the table. The following are the valid values that may be written to RowStatus: Writing createAndGo(4) to the RowStatus of a non-existent row shall create a new row. The new row shall be active(1). If the row exists, it shall be an error. Writing createAndWait(5) to the RowStatus of a non-existent row or to an existent row shall be an error. Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error. Writing notInService(2) to the RowStatus of a non-existent row or to an existent row shall be an error. Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed. Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error. Attempts to create more entries than the hardware can support shall be rejected.
STR hpnicfL4RedirectInformationString	1.3.6.1.4.1.11.2.14.11.15.2.10.4	DisplayString	read-only	This object shall contain the string generated as a result of a Layer 4 Redirection configuration. It shall contain either a string describing successful configuration or a string describing unsuccessful configuration. This length of this string shall be no longer than 80 characters.
INT hpnicfL4RedirectFreeCacheEntriesEx	1.3.6.1.4.1.11.2.14.11.15.2.10.5	INTEGER	read-only	This object indicates the number of entries that may still be added to the hpnicfL4RedirectCacheTable.
INT hpnicfL4RedirectFreeIpExclusionEntries	1.3.6.1.4.1.11.2.14.11.15.2.10.6	INTEGER	read-only	This object indicates the number of entries that may still be added to the hpnicfL4RedirectIpExclusionTable.
INT hpnicfL4RedirectFreeVlanEntries	1.3.6.1.4.1.11.2.14.11.15.2.10.7	INTEGER	read-only	This object indicates the number of entries that may still be added to the hpnicfL4RedirectVlanTable.

RFC description

Layer 4 traffic redirection configuration for web cache management on HP/HPE Layer 4 switches.

Start monitoring H3C/HPE Networking (ICF-based) device (Layer 4 Redirect/captive portal) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-L4RDT-MIB