H3C-RCP-MIB

All MIBs › H3C-RCP-MIB

Organization: Huawei 3Com Technologies Co., Ltd.

Last Updated: 2006-09-20

Category: Vendor: H3C/HH3C

Description: H3C MIB for Routing Control Protocol (RCP) managing centralized routing policy distribution to network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-RCP-MIB?

H3C-RCP-MIB is an H3C (Hangzhou Huawei-3Com) enterprise MIB for managing the Routing Control Protocol (RCP) server, a mechanism used to centrally distribute routing policy rules to network devices. It belongs to the routing/policy-control technology area and exposes both configuration data (server enable status, connection and rule timeouts, maximum connections, balance-group ID ranges) and live operational counters (current connection count, total users, total client IPs). Its monitoring value lies in tracking the software-service health of the RCP server process itself — verifying the server is enabled, watching current connections against the configured maximum to detect saturation, and tracking total connected users/client IPs to spot unusual load or a potential client flood. It is a self-contained H3C proprietary protocol MIB with no stated dependency on external IETF routing standards. Typical deployment context is H3C routers acting as centralized policy-distribution servers within an SDN-like or centrally managed routing domain. Engineers can download the H3C-RCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-RCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C router acting as RCP policy server

Monitoring Examples

An administrator polls h3cRCPServerEnableStatus to confirm the RCP server is running, then compares h3cRCPServerCurConn against h3cRCPServerMaxConn to see how close the server is to its connection ceiling. Rising h3cRCPTotalUsers and h3cRCPTotalClientIPs alongside connections nearing h3cRCPServerMaxConnMaxValue would indicate the server is approaching capacity and may need retuning of h3cRCPConnTimeout or h3cRCPRuleTimeout to free up stale sessions.

What Can Be Monitored

RCP server enable status
current vs. max connections
total connected users
total client IPs
connection and rule timeout settings

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cRCP

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cRCPMIB	1.3.6.1.4.1.2011.10.2.73.1			The MIB module is used for managing RCP protocol server.
h3cRCPLeaf	1.3.6.1.4.1.2011.10.2.73.1.1
T/F h3cRCPServerEnableStatus	1.3.6.1.4.1.2011.10.2.73.1.1.1	TruthValue	read-write	This attribute controls the system wide operation of RCP server. The value TRUE means that the RCP server is enabled. The value FALSE means that the RCP server is disabled.
I32 h3cRCPConnTimeout	1.3.6.1.4.1.2011.10.2.73.1.1.2	Integer32	read-write	Specifies the maximum time in seconds that a RCP client connection is idle.
I32 h3cRCPRuleTimeout	1.3.6.1.4.1.2011.10.2.73.1.1.3	Integer32	read-write	Specifies the time in seconds before a RCP rule is aged out. If its value is 0, it indicates RCP rule will not be aged out.
I32 h3cRCPServerMaxConn	1.3.6.1.4.1.2011.10.2.73.1.1.4	Integer32	read-write	Specifies the maximum number of clients that permitted to connect with RCP server at the same time.
I32 h3cRCPServerCurConn	1.3.6.1.4.1.2011.10.2.73.1.1.5	Integer32	read-only	The current actual number of clients that connecting with RCP server.
I32 h3cRCPConnTimeoutMaxValue	1.3.6.1.4.1.2011.10.2.73.1.1.6	Integer32	read-only	Specifies the maximum value of h3cRCPConnTimeout.
I32 h3cRCPRuleTimeoutMaxValue	1.3.6.1.4.1.2011.10.2.73.1.1.7	Integer32	read-only	Specifies the maximum value of h3cRCPRuleTimeout.
I32 h3cRCPServerMaxConnMaxValue	1.3.6.1.4.1.2011.10.2.73.1.1.8	Integer32	read-only	Specifies the maximum value of h3cRCPServerMaxConn.
I32 h3cRCPBalanceGroupIdMinValue	1.3.6.1.4.1.2011.10.2.73.1.1.9	Integer32	read-only	Specifies the minimum value of balance group identity.
I32 h3cRCPBalanceGroupIdMaxValue	1.3.6.1.4.1.2011.10.2.73.1.1.10	Integer32	read-only	Specifies the maximum value of balance group identity.
I32 h3cRCPTotalUsers	1.3.6.1.4.1.2011.10.2.73.1.1.11	Integer32	read-only	Specifies the total number of RCP user.
I32 h3cRCPTotalClientIPs	1.3.6.1.4.1.2011.10.2.73.1.1.12	Integer32	read-only	Specifies the total number of RCP client IP.
h3cRCPTable	1.3.6.1.4.1.2011.10.2.73.1.2
h3cRCPUserTable	1.3.6.1.4.1.2011.10.2.73.1.2.1		not-accessible	RCP User Info Table.
h3cRCPUserEntry	1.3.6.1.4.1.2011.10.2.73.1.2.1.1		not-accessible	The entry of h3cRCPUserTable.
STR h3cRCPUserName	1.3.6.1.4.1.2011.10.2.73.1.2.1.1.1	DisplayString	not-accessible	The name of RCP user.
STR h3cRCPUserPassword	1.3.6.1.4.1.2011.10.2.73.1.2.1.1.2	DisplayString	read-create	The password of RCP user. It is invisible to users and displayed as '***'.
NUM h3cRCPUserRedirectInterface	1.3.6.1.4.1.2011.10.2.73.1.2.1.1.3	InterfaceIndexOrZero	read-create	The redirect interface index of RCP user. The RCP rule assigned by the user can be associated with the redirect interface. If the redirect interface is invalid, its value is set to be 0.
I32 h3cRCPUserRedirectBalanceGroup	1.3.6.1.4.1.2011.10.2.73.1.2.1.1.4	Integer32	read-create	The redirect balance group identity of RCP user. The RCP rule assigned by the user can be associated with the redirect balance group. If the balance group is invalid, its value is set to be 0.
ROW h3cRCPUserRowStatus	1.3.6.1.4.1.2011.10.2.73.1.2.1.1.5	RowStatus	read-create	This manages the creation and deletion of rows, and shows the current status of the indexed user name. This object has the following values. active(1) The indexed user name is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new user. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of h3cRCPUserRowStatus is active(1). When deleting an inexistence entry, return noError.
h3cRCPClientIPTable	1.3.6.1.4.1.2011.10.2.73.1.2.2		not-accessible	RCP Client IP Table.
h3cRCPClientIPEntry	1.3.6.1.4.1.2011.10.2.73.1.2.2.1		not-accessible	The entry of h3cRCPClientIPTable.
IPt h3cRCPClientIPType	1.3.6.1.4.1.2011.10.2.73.1.2.2.1.1	InetAddressType	not-accessible	The IP address type (IPv4 or IPv6) of RCP client.
IP h3cRCPClientIP	1.3.6.1.4.1.2011.10.2.73.1.2.2.1.2	InetAddress	not-accessible	The IP address of RCP client.
ROW h3cRCPClientIPRowStatus	1.3.6.1.4.1.2011.10.2.73.1.2.2.1.3	RowStatus	read-create	This manages the creation and deletion or rows, and shows the current status of the indexed client IP address. This object has the following values. active(1) The indexed client IP is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new client IP. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of h3cRCPClientIPRowStatus is active(1). When deleting an inexistence entry, return noError.
h3cRCPSessionTable	1.3.6.1.4.1.2011.10.2.73.1.2.3		not-accessible	RCP session Table.
h3cRCPSessionEntry	1.3.6.1.4.1.2011.10.2.73.1.2.3.1		not-accessible	The entry of h3cRCPSessionTable.
I32 h3cRCPSessionId	1.3.6.1.4.1.2011.10.2.73.1.2.3.1.1	Integer32	not-accessible	RCP session identity.
IPt h3cRCPSessionClientIPType	1.3.6.1.4.1.2011.10.2.73.1.2.3.1.2	InetAddressType	read-only	The IP address type (IPv4 or IPv6) of RCP client.
IP h3cRCPSessionClientIP	1.3.6.1.4.1.2011.10.2.73.1.2.3.1.3	InetAddress	read-only	RCP client IP address.
INT h3cRCPSessionRunningStatus	1.3.6.1.4.1.2011.10.2.73.1.2.3.1.4	INTEGER	read-only	RCP server running status. It is one of the following status: connected: The connection is established and the RCP client is waiting for authentication. operational: The RCP client is authenticated and the server is ready for rule configuration request.
STR h3cRCPSessionUserName	1.3.6.1.4.1.2011.10.2.73.1.2.3.1.5	DisplayString	read-only	RCP user name.

RFC description

H3C Router Configuration Protocol MIB for managing H3C router device configurations. Provides SNMP objects for saving, backing up, restoring configurations and monitoring configuration change notifications.

Start monitoring H3C router acting as Routing Control Protocol (RCP) policy server with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-RCP-MIB

What Is H3C-RCP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description