All MIBs › HPN-ICF-L4RDT-MIB › hpnicfL4RedirectVlanRowStatus
hpnicfL4RedirectVlanRowStatus
Module: HPN-ICF-L4RDT-MIB
OID (symbolic): HPN-ICF-L4RDT-MIB::hpnicfL4RedirectVlanRowStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.2
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-create
Description: This object allows ports to be added and removed from the table.
The following are the valid values that may be written to RowStatus:
Writing createAndGo(4) to the RowStatus of a non-existent row shall create a new row. The new row shall be active(1). If the row exists, it shall be an error.
Writing createAndWait(5) to the RowStatus of a non-existent row or to an existent row shall be an error.
Writing active(1) to the RowStatus of an existing row shall change the value of that row to active(1). Writing active(1) to the RowStatus of an existing row that is already active(1) shall not cause an error, the row shall remain active(1). If the row does not exist, it shall be an error.
Writing notInService(2) to the RowStatus of a non-existent row or to an existent row shall be an error.
Writing destroy(6) to the RowStatus of a non-existent row shall be an error. If the row exists, it shall be removed.
Writing notReady(3) to the RowStatus of a non-existent row or to an existent row shall be an error.
Attempts to create more entries than the hardware can support shall be rejected.
What is hpnicfL4RedirectVlanRowStatus?
hpnicfL4RedirectVlanRowStatus is the standard SNMP RowStatus object used to add or remove VLAN entries in the table that specifies which VLANs' traffic is eligible for Layer 4 redirection to the web cache. An admin uses it to scope redirection to particular VLANs rather than applying it network-wide. For example, an admin wanting only guest-network traffic cached would set hpnicfL4RedirectVlanRowStatus to createAndGo for that VLAN's ID while leaving other VLANs untouched.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.10 | hpnicfL4Redirect | HPN-ICF-L4RDT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.10.3 | hpnicfL4RedirectVlanTable | HPN-ICF-L4RDT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.10.3.1 | hpnicfL4RedirectVlanEntry | HPN-ICF-L4RDT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.10.3.1.2 | hpnicfL4RedirectVlanRowStatus | HPN-ICF-L4RDT-MIB |