H3C-LOGIC-VOLUME-MIB

All MIBs › H3C-LOGIC-VOLUME-MIB

Organization: H3C Technologies Co., Ltd.

Last Updated: 2007-09-04

Category: Domain: Storage, Vendor: H3C/HH3C

Description: H3C MIB for logical volume management on H3C storage systems including volume creation and capacity tracking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-LOGIC-VOLUME-MIB?

This H3C vendor MIB manages logical volumes on H3C storage systems, providing objects to describe and create logical disk volumes backed by underlying physical disk/RAID resources. It exposes counts and capacity limits for logical volumes, targets, and initiators, along with a logical volume table detailing each volume's name, total size, and the RAID UUID it was created from. Its monitoring value centers on storage hardware/capacity status, tracking how many logical volumes exist, their sizes relative to maximum allowed capacity, and disk resource utilization, which helps detect capacity exhaustion or misconfigured volumes on the storage array. It likely depends on underlying RAID/disk hardware MIBs, referenced via the RAID UUID linkage, for physical disk health data feeding into these logical volumes. It is deployed on H3C storage systems (SAN/NAS controllers) providing block or file-level logical volumes to SAN clients. Engineers can download the H3C-LOGIC-VOLUME-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-LOGIC-VOLUME-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C storage systems (SAN/NAS controllers)

Monitoring Examples

An administrator would poll h3cLvCount against h3cLvMaxSize-derived capacity limits to determine how much logical volume capacity remains available for provisioning on the storage array. Checking h3cLvTable/h3cLvEntry fields like h3cLvName, h3cLvTotalSize, and h3cLvCreateRaidUuid would confirm a newly created volume is correctly sized and backed by the intended RAID group. Monitoring h3cTargetCount and h3cInitiatorCount would reveal how many SAN targets/initiators are registered, helping detect an unexpected drop in client connectivity to the storage system.

What Can Be Monitored

logical volume count and size
maximum volume capacity
RAID UUID association
SAN target/initiator count
storage capacity utilization

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From H3C-STORAGE-REF-MIB

H3cLvIDType
H3cRaidIDType
H3cSessionIDType
H3cStorageActionType
H3cStorageEnableState
H3cStorageLedStateType
H3cWwpnListType
h3cStorageRef	MODULE-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using h3cTISessionConnectionCount OID:

Select an H3C storage system as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cTISessionConnectionCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object describes the number of connections between the targets and initiators. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cLogicVolume	1.3.6.1.4.1.2011.10.10.5			This MIB describes the general information of disk device.
h3cLvMibObjects	1.3.6.1.4.1.2011.10.10.5.1
h3cLogicResourceCapacityObject	1.3.6.1.4.1.2011.10.10.5.1.1
I32 h3cLvCount	1.3.6.1.4.1.2011.10.10.5.1.1.1	Integer32	read-only	This object identifies the maximal number of logic volumes supported.
I32 h3cLvMaxSize	1.3.6.1.4.1.2011.10.10.5.1.1.2	Integer32	read-only	This object identifies the maximal size of logic volumes supported.
I32 h3cTargetCount	1.3.6.1.4.1.2011.10.10.5.1.1.3	Integer32	read-only	This object identifies the maximal number of targets supported.
I32 h3cInitiatorCount	1.3.6.1.4.1.2011.10.10.5.1.1.4	Integer32	read-only	This object identifies the maximal number of initiators supported.
I32 h3cSanClientCount	1.3.6.1.4.1.2011.10.10.5.1.1.5	Integer32	read-only	This object identifies the maximal number of SAN client supported.
h3cLogicVolumeResource	1.3.6.1.4.1.2011.10.10.5.1.2
H3C h3cLvCreateIndex	1.3.6.1.4.1.2011.10.10.5.1.2.1	H3cLvIDType	read-only	This object supplys an valid index which uses to create a new entry for the h3cLvTable object. Reference to h3cLvRowStatus object for more information. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
h3cLvTable	1.3.6.1.4.1.2011.10.10.5.1.2.2		not-accessible	This table describes the logic resource information of a logic volume.
h3cLvEntry	1.3.6.1.4.1.2011.10.10.5.1.2.2.1		not-accessible	An entry containing management information applicable to a particular logic resource.
H3C h3cLvIndex	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.1	H3cLvIDType	not-accessible	This object describes the symbol of a logic volume.
OCT h3cLvName	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.2	OCTET STRING	read-create	This object identifies the name of a logic volume.
I32 h3cLvTotalSize	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.3	Integer32	read-only	This object describes the total size of a logic volume. The units is million bytes.
H3C h3cLvCreateRaidUuid	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.4	H3cRaidIDType	read-create	This object describes the ID of array where a logic volume build on.
I32 h3cLvCreateRaidSize	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.5	Integer32	read-create	This object describes the size of a logic volume when create it. The units is million bytes.
T/F h3cLvSedInquiryStringKeep	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.6	TruthValue	read-create	This object identifies if the inquiry string of the logic volume should be reserved. This value of this object is valid only when the associated h3cLvType is equal to 'serviceEnabled'.
H3C h3cLvSedRaidUuid	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.7	H3cRaidIDType	read-only	This object describes the location where the SED infomation is build on.
INT h3cLvState	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.8	INTEGER	read-only	This object identifies the state of a logic volume. The value 'conflict' means the names of two or more logic volume are reduplicate.
INT h3cLvAssigned	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.9	INTEGER	read-only	This object identifies if the logic volume has be designated for target or SAN client.
INT h3cLvType	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.10	INTEGER	read-only	This object describes the type of a logic volume. The value 'virtual' means virtual devices are defined as sets of storage blocks from one or more physical array. This allows the creation of virtual devices that can be a portion of a larger physical array, or an aggregation of multiple physical array. The value 'direct' means direct devices are directly mapped SCSI devices. Because they are not virtualized, direct devices cannot take advantage of advanced storage options, such as mirroring, failover, replication, or snapshot copy. The value 'serviceEnabled' means service enabled devices are all maintained in a one-to-one mapping relationship(one physical array equals one logical device).
I32 h3cLvExtendTimes	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.11	Integer32	read-only	This object describes the times the logic volume has been extended.
ROW h3cLvRowStatus	1.3.6.1.4.1.2011.10.10.5.1.2.2.1.12	RowStatus	read-create	This object describes the actions to create or delete a logic volume.
h3cLvExtTable	1.3.6.1.4.1.2011.10.10.5.1.3		not-accessible	This table contains the extend resource information of the logic volume.
h3cLvExtEntry	1.3.6.1.4.1.2011.10.10.5.1.3.1		not-accessible	An entry containing management information applicable to extend resource of logic volume.
H3C h3cLvRaidUuid	1.3.6.1.4.1.2011.10.10.5.1.3.1.1	H3cRaidIDType	not-accessible	This index is identical to h3cRaidUuid in H3C-RAID-MIB.
I32 h3cLvExtSize	1.3.6.1.4.1.2011.10.10.5.1.3.1.2	Integer32	read-create	This object describes the extend size of the logic volume in a specific raid. The units is million bytes. This object will always return zero when read.
I32 h3cLvRaidSize	1.3.6.1.4.1.2011.10.10.5.1.3.1.3	Integer32	read-only	This object describes the size of logic volume on the specific raid. The units is million bytes.
ROW h3cLvExtRowStatus	1.3.6.1.4.1.2011.10.10.5.1.3.1.4	RowStatus	read-create	This object describes the action to extend the logic volume.
h3cTargetResource	1.3.6.1.4.1.2011.10.10.5.1.4
I32 h3cTargetCreateIndex	1.3.6.1.4.1.2011.10.10.5.1.4.1	Integer32	read-only	This object supplys an valid index which uses to create a new entry for the h3cTargetTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
h3cTargetTable	1.3.6.1.4.1.2011.10.10.5.1.4.2		not-accessible	This table describes some information when creating a target.
h3cTargetEntry	1.3.6.1.4.1.2011.10.10.5.1.4.2.1		not-accessible	An entry containing management information applicable to a target when create it.
I32 h3cTargetId	1.3.6.1.4.1.2011.10.10.5.1.4.2.1.1	Integer32	not-accessible	This object identifies the ID of a target.
OCT h3cTargetName	1.3.6.1.4.1.2011.10.10.5.1.4.2.1.2	OCTET STRING	read-create	This object describes the name of a target.
I32 h3cTargetMinLun	1.3.6.1.4.1.2011.10.10.5.1.4.2.1.3	Integer32	read-create	This object describes the mini LUN(logical unit number) number of a target.
ROW h3cTargetRowStatus	1.3.6.1.4.1.2011.10.10.5.1.4.2.1.4	RowStatus	read-create	This object describes the actions to add or delete the target.
h3cTargetAddressTable	1.3.6.1.4.1.2011.10.10.5.1.5		not-accessible	This table described some address information of a target.
h3cTargetAddressEntry	1.3.6.1.4.1.2011.10.10.5.1.5.1		not-accessible	An entry containing management information applicable to the address of a target.
IP h3cTargetIpAddress	1.3.6.1.4.1.2011.10.10.5.1.5.1.1	InetAddress	not-accessible	This object describes the IP address of a target.
IPt h3cTargetIpAddrType	1.3.6.1.4.1.2011.10.10.5.1.5.1.2	InetAddressType	not-accessible	This object describes the type of IP address.
ROW h3cTargetIpRowStatus	1.3.6.1.4.1.2011.10.10.5.1.5.1.3	RowStatus	read-create	This object describes the actions to add or delete a IP address of a target.
h3cTargetLvAssignTable	1.3.6.1.4.1.2011.10.10.5.1.6		not-accessible	This table describes logic resource information of a target.
h3cTargetLvAssignEntry	1.3.6.1.4.1.2011.10.10.5.1.6.1		not-accessible	An entry containing management information applicable to the logic resource of a target.
I32 h3cTargetLvLun	1.3.6.1.4.1.2011.10.10.5.1.6.1.1	Integer32	read-only	This object identifies the init LUN number of a target.
ROW h3cTargetLvRowStatus	1.3.6.1.4.1.2011.10.10.5.1.6.1.2	RowStatus	read-create	This object describes the actions to add or delete the logic resource of a target.
h3cInitiatorResource	1.3.6.1.4.1.2011.10.10.5.1.7
I32 h3cInitiatorCreateIndex	1.3.6.1.4.1.2011.10.10.5.1.7.1	Integer32	read-only	This object supplys an valid index which uses to create a new entry for the h3cInitiatorTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
h3cInitiatorTable	1.3.6.1.4.1.2011.10.10.5.1.7.2		not-accessible	This table describes the creation information of initiators.
h3cInitiatorEntry	1.3.6.1.4.1.2011.10.10.5.1.7.2.1		not-accessible	An entry containing management information applicable to the creation of initiator.
I32 h3cInitiatorId	1.3.6.1.4.1.2011.10.10.5.1.7.2.1.1	Integer32	not-accessible	This object identifies the ID of the initiator.
OCT h3cInitiatorName	1.3.6.1.4.1.2011.10.10.5.1.7.2.1.2	OCTET STRING	read-create	This object describes the name of the initiator.
ROW h3cInitiatorRowStatus	1.3.6.1.4.1.2011.10.10.5.1.7.2.1.3	RowStatus	read-create	This object describes the actions to add or delete initiators.
h3cTargetInitiatorAssociateTable	1.3.6.1.4.1.2011.10.10.5.1.8		not-accessible	This table describes the associate information between the target and initiator.
h3cTargetInitiatorAssociateEntry	1.3.6.1.4.1.2011.10.10.5.1.8.1		not-accessible	An entry containing management information applicable to association between the target and initiator.
INT h3cTIAccessMode	1.3.6.1.4.1.2011.10.10.5.1.8.1.1	INTEGER	read-create	This object identifies the mode of accessing between the target and initiator. The value 'read' means read available. The value 'write' means read/write available, and write available only for one association. The value 'nonexclusive' means read/write available for multi-association.
H3C h3cTIChap	1.3.6.1.4.1.2011.10.10.5.1.8.1.2	H3cStorageEnableState	read-create	This object identifies the state of the chap attestation.
OCT h3cTIUserName	1.3.6.1.4.1.2011.10.10.5.1.8.1.3	OCTET STRING	read-create	This object identifies the user name for the chap attestation.
OCT h3cTIPassword	1.3.6.1.4.1.2011.10.10.5.1.8.1.4	OCTET STRING	read-create	This object identifies the password for the chap attestation. It is proclaimed and can be modified.
ROW h3cTIRowStatus	1.3.6.1.4.1.2011.10.10.5.1.8.1.5	RowStatus	read-create	This object describes the actions to add or delete the association.
h3cTISessionTable	1.3.6.1.4.1.2011.10.10.5.1.9		not-accessible	This table described the information of the sessions.
h3cTISessionEntry	1.3.6.1.4.1.2011.10.10.5.1.9.1		not-accessible	An entry containing management information applicable to the sessions.
H3C h3cTISessionId	1.3.6.1.4.1.2011.10.10.5.1.9.1.1	H3cSessionIDType	not-accessible	This object identifies the ID of a session.
C32 h3cTISessionConnectionCountEx	1.3.6.1.4.1.2011.10.10.5.1.9.1.2	Counter32	read-only	This object describes the number of connections between the targets and initiators.
OCT h3cTISessionInitiatorName	1.3.6.1.4.1.2011.10.10.5.1.9.1.3	OCTET STRING	read-only	This object identifies the initiator's name of a session.
h3cSanClientResource	1.3.6.1.4.1.2011.10.10.5.1.10
I32 h3cSanClientCreateIndex	1.3.6.1.4.1.2011.10.10.5.1.10.1	Integer32	read-only	This object supplys an valid index which uses to create a new entry for the h3cSanClientTable object. Note that if an entry of the associated table has been created or deleted, the historical value of this object may be an invalid index to create a new entry for the associated table.
h3cSanClientTable	1.3.6.1.4.1.2011.10.10.5.1.10.2		not-accessible	This table described the information of SAN(Storage Area Network) clients.
h3cSanClientEntry	1.3.6.1.4.1.2011.10.10.5.1.10.2.1		not-accessible	An entry containing management information applicable to the SAN clients.
I32 h3cSanClientId	1.3.6.1.4.1.2011.10.10.5.1.10.2.1.1	Integer32	not-accessible	This object identifies the index of a SAN client.
OCT h3cSanClientName	1.3.6.1.4.1.2011.10.10.5.1.10.2.1.2	OCTET STRING	read-create	This object identifies the name of a SAN client.
INT h3cSanClientType	1.3.6.1.4.1.2011.10.10.5.1.10.2.1.3	INTEGER	read-create	This object identifies the type of a SAN client.
H3C h3cFcInitiatorWwpnList	1.3.6.1.4.1.2011.10.10.5.1.10.2.1.4	H3cWwpnListType	read-create	This object identifies the name list of FC Initiator WWPN(World Wide Port Name). The value of this object is invalid and should be ignored when the value of associated h3cSanClientType object is not equal to 'fc'.
INT h3cFcAccessMode	1.3.6.1.4.1.2011.10.10.5.1.10.2.1.6	INTEGER	read-create	This object identifies the mode of access. The value of this object is invalid and should be ignored when the value of associated h3cSanClientType object is not equal to 'fc'. The value 'read' means read available. The value 'write' means read/write available, and write available only for one association. The value 'nonexclusive' means read/write available for multi-association.
ROW h3cSanClientRowStatus	1.3.6.1.4.1.2011.10.10.5.1.10.2.1.7	RowStatus	read-create	This object describes the action to create or delete a SAN client.
h3cFcLogicResourceTable	1.3.6.1.4.1.2011.10.10.5.1.11		not-accessible	This table describes logic resource information of a FC.
h3cFcLogicResourceEntry	1.3.6.1.4.1.2011.10.10.5.1.11.1		not-accessible	An entry containing management information applicable to the logic resource of a FC.
I32 h3cFcLvLun	1.3.6.1.4.1.2011.10.10.5.1.11.1.1	Integer32	read-only	This object identifies the init LUN number of a FC.
H3C h3cFcTargetWwpnName	1.3.6.1.4.1.2011.10.10.5.1.11.1.2	H3cWwpnListType	read-create	This object identifies the name list of FC Target WWPN(World Wide Port Name).
H3C h3cFcInitiatorWwpnName	1.3.6.1.4.1.2011.10.10.5.1.11.1.3	H3cWwpnListType	read-create	This object identifies the name list of FC Initiator WWPN(World Wide Port Name).
ROW h3cFcLvRowStatus	1.3.6.1.4.1.2011.10.10.5.1.11.1.4	RowStatus	read-create	This object describes the actions to add or delete the logic resource of a FC.

RFC description

Manages logical volume and storage device configuration on H3C storage systems.

Start monitoring H3C storage systems with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-LOGIC-VOLUME-MIB