HPN-ICF-SNA-DLSW-EXT-MIB

All MIBs › HPN-ICF-SNA-DLSW-EXT-MIB

Last Updated: 2005-07-20

Category: SNA and Legacy Protocols, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Data Link Switching (DLSw) SNA circuit bridging extensions on HP/Comware enterprise WAN routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-SNA-DLSW-EXT-MIB?

HPN-ICF-SNA-DLSW-EXT-MIB is a vendor MIB from HP/H3C's Comware (ICF) platform extending Data Link Switching (DLSw) management for bridging SNA/legacy traffic over IP, per RFC 1795, RFC 2024, and RFC 2166. It exposes configuration data in the tunneling/protocol category: per-DLSw-node parameters such as pacing windows, keep-alive interval, connection timeout values, and per-connection (TConn) settings, alongside vendor and addressing identification for each node. Its monitoring role is focused on the software/protocol status of DLSw tunnels -- watching hpnicfdeNodeKeepAliveInterval, connection timeout objects, and TConn entries reveals whether SNA circuit-emulation tunnels are staying alive and correctly paced, which is critical for detecting stalled or dropped legacy SNA sessions over an IP backbone. It explicitly depends on and extends the base DLSw standard defined in RFC 1795/2024/2166, layering vendor-specific tuning objects on top. It is typically deployed on HP/H3C Comware WAN routers bridging legacy SNA/mainframe traffic across a modern IP network. Engineers can download the HPN-ICF-SNA-DLSW-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-SNA-DLSW-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware WAN routers running DLSw for SNA bridging

Monitoring Examples

An administrator would poll hpnicfdeNodeKeepAliveInterval and the timeout objects hpnicfdeNodeConnTimeout, hpnicfdeNodeLocalPendTimeout, and hpnicfdeNodeRemotePendTimeout for a given DLSw node to confirm the tunnel is configured with expected liveness parameters. Checking hpnicfdeTConn entries alongside hpnicfdeNodeInitPacingWindow/hpnicfdeNodeMaxPacingWindow would reveal a pacing-window mismatch or a hung TConn session causing SNA traffic to back up or the DLSw peer connection to flap.

What Can Be Monitored

DLSw node keep-alive interval
connection/pending timeouts
pacing window (initial/max)
SNA cache timeout
TConn connection state
node local/remote address

Imported Objects

From DLSW-MIB

LFSize
MacAddressNC
TAddress
dlswTConnConfigEntry	OBJECT-TYPE
dlswTConnOperEntry	OBJECT-TYPE
dlswTConnTcpConfigEntry	OBJECT-TYPE

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using hpnicfdeTConnOperRecvPkts OID:

Select an HP/H3C Comware WAN router running DLSw for SNA bridging (extended config) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfdeTConnOperRecvPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfDlswExt	1.3.6.1.4.1.11.2.14.11.15.2.62			The MIB module for management of specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166.
hpnicfDlswExtMIBObjects	1.3.6.1.4.1.11.2.14.11.15.2.62.1
hpnicfdeNode	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1
OCT hpnicfdeNodeVendorID	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.1	OCTET STRING	read-write	The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
IPt hpnicfdeNodeIpAddrType	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.2	InetAddressType	read-write	The type of ip address: IPv4 or IPv6.
IP hpnicfdeNodeLocalAddr	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.3	InetAddress	read-write	Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
I32 hpnicfdeNodePriority	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.4	Integer32	read-write	Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered when a circuit is established. A lower priority indicates that peer will be the preferred choice if there are more than one path to the destination. A value of 65535 indicates the value is meaningless.
I32 hpnicfdeNodeInitPacingWindow	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.5	Integer32	read-write	Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless.
I32 hpnicfdeNodeMaxPacingWindow	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.6	Integer32	read-write	Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement.
I32 hpnicfdeNodeKeepAliveInterval	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.7	Integer32	read-write	Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw to keep track of the state of all peers. If set to zero, no keepalives are sent. A value of 65535 indicates the value is meaningless.
INT hpnicfdeNodePermitDynamic	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.8	INTEGER	read-write	To accept connections from non-configured remote peer when permitDynamic is specified.
I32 hpnicfdeNodeConnTimeout	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.9	Integer32	read-write	Define connected state timer.
I32 hpnicfdeNodeLocalPendTimeout	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.10	Integer32	read-write	Define connected state timer.
I32 hpnicfdeNodeRemotePendTimeout	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.11	Integer32	read-write	Define connected state timer.
I32 hpnicfdeNodeSnaCacheTimeout	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.12	Integer32	read-write	Define connected state timer.
I32 hpnicfdeNodeExplorerTimeout	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.13	Integer32	read-write	Define explorer timer.
I32 hpnicfdeNodeExplorerWaitTimeout	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.14	Integer32	read-write	Define explorer waiting timer.
OCT hpnicfdeNodeConfigSapList	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15	OCTET STRING	read-write	The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in hpnicfdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.
I32 hpnicfdeNodeMaxTransmission	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.16	Integer32	read-write	The maximum retry times for TCP packet. Default value is 5.
INT hpnicfdeNodeMulticastStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.17	INTEGER	read-write	Multicast support status. It is disabled by default.
IP hpnicfdeNodeMulticastAddress	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.18	InetAddress	read-write	Multicast address. Default is 224.0.10.0. When the hpnicfdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
INT hpnicfdeNodeResetTcpAll	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.19	INTEGER	read-write	Reset all TCP circuit switch. Any return value is meaningless.
I32 hpnicfdeNodeStCapTcpNum	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.20	Integer32	read-write	Tcp number reported in DLSw Capabilities Exchange.
I32 hpnicfdeNodeTcpQueueMax	1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.21	Integer32	read-write	The max length of TCP queue.
hpnicfdeTConn	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2
hpnicfdeTConnConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1		not-accessible	This table defines the peer transport connections that will be initiated or accepted by this DLSw. This table augments dlswTConnConfigTable.
hpnicfdeTConnConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1		not-accessible	A list of objects that define specific configuration for a DLSw peer transport connection.
OCT hpnicfdeTConnConfigVersion	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.1	OCTET STRING	read-create	This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw Capabilities Exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hpnicfdeTConnOperState of 'connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep hpnicfdeTConnOperEntrys in the 'disconnected' state, this value should remain unchanged.
I32 hpnicfdeTConnConfigPriority	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.2	Integer32	read-create	The priority for remote peer.
LFS hpnicfdeTConnConfigLfSize	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.3	LFSize	read-create	The largest frame size.
I32 hpnicfdeTConnConfigKeepaliveIntval	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.4	Integer32	read-create	The keepalive interval value.
INT hpnicfdeTConnConfigBackup	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.5	INTEGER	read-create	The current remote peer is configured as the backup of another configured remote peer.
ADR hpnicfdeTConnConfigBackupTAddr	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.6	TAddress	read-create	It is the ip address of a configured remote peer of which the current remote peer is configrued as backup.
I32 hpnicfdeTConnConfigBackupLinger	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.7	Integer32	read-create	Backup peer linger.
hpnicfdeTConnOperTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2		not-accessible	A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable.
hpnicfdeTConnOperEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1		not-accessible	A list of objects that contain spefific operational information for a DLSw peer transport connection.
INT hpnicfdeTConnOperPeerType	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.1	INTEGER	read-only	The current remote peer is configured when the value is 'configured'.
OCT hpnicfdeTConnOperVendorID	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.2	OCTET STRING	read-only	The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of remote peer.
OCT hpnicfdeTConnOperVersionString	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.3	OCTET STRING	read-only	Version information of remote peer. The length up to 512 bytes.
TIK hpnicfdeTConnOperUpTime	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.4	TimeTicks	read-only	The amount of time (in seconds) since this transport connection last entered the 'connected' state.
ADR hpnicfdeTConnOperMulticastAddress	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.5	TAddress	read-only	When remote peer supports DLSw2.0, this node identifies its multicast address.
I32 hpnicfdeTConnOperStCapTcpNumber	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.6	Integer32	read-only	Number of tcp supported when capabilities exchanging.
C32 hpnicfdeTConnOperRecvPktsEx	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.7	Counter32	read-only	The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
C32 hpnicfdeTConnOperSendPkts	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.8	Counter32	read-only	The number of SSP messages sent on this tcp transport connection.
C32 hpnicfdeTConnOperDropPkts	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.9	Counter32	read-only	The number of SSP messages dropped on this tcp transport connection.
hpnicfdeTConnTcpConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3		not-accessible	This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. In other words for each conceptual row in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is dlswTCPDomain, that conceptual row will be augmented by this table. dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain are all imported from DLSW-MIB (RFC 2024). This table augments dlswTConnTcpConfigTable.
hpnicfdeTConnTcpConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1		not-accessible	A list of objects that define specific configuration for a DLSw peer transport connection within the dlswTCPDomain. dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
I32 hpnicfdeTConnTcpConfigQueueMax	1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1.1	Integer32	read-create	Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row.
hpnicfdeBridge	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3
hpnicfdeBridgeTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1		not-accessible	A list of bridge group which is serving for DLSw.
hpnicfdeBridgeEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1		not-accessible	A list of bridge information.
I32 hpnicfdeBridgeNumIndex	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.1	Integer32	not-accessible	This value identifies the bridge number.
ROW hpnicfdeBridgeRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.2	RowStatus	read-create	RowStatus.
hpnicfdeBridgeIfTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2		not-accessible	The list of interface on which DLSw is active.
hpnicfdeBridgeIfEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1		not-accessible	The list of bridge interface information.
I32 hpnicfdeBridgeIfBrgGrp	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.1	Integer32	read-create	This value identifies the bridge number attached to the interface.
ROW hpnicfdeBridgeIfRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.2	RowStatus	read-create	RowStatus.
hpnicfdeQllc	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4
hpnicfdeQllcTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1		not-accessible	The table defines attributes related for those QLLC that participate in data link switching.
hpnicfdeQllcEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1		not-accessible	The ifIndex belongs to the interface which link protocol is x.25.
I32 hpnicfQllcX121Address	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.1	Integer32	read-create	X.121 address.
ADR hpnicfQllcLocalMac	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.2	MacAddressNC	read-create	The virtual MAC address used to represent the QLLC-attached link station to the rest of the DLSw network.
OCT hpnicfQllcLocalSap	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.3	OCTET STRING	read-create	The SAP used to represent this link station.
ADR hpnicfQllcRemoteMac	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.4	MacAddressNC	read-create	The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.
OCT hpnicfQllcRemoteSap	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.5	OCTET STRING	read-create	The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.
ROW hpnicfQllcRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.6	RowStatus	read-create	RowStatus.
hpnicfdeSdlc	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5
hpnicfdeSdlcPortTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1		not-accessible	The table defines parameters for the interfaces whose link protocol is SDLC.
hpnicfdeSdlcPortEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1		not-accessible	Sdlc port entry.
INT hpnicfdeSdlcPortRole	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.1	INTEGER	read-create	The SDLC role of interface.
I32 hpnicfdeSdlcPortSendWindow	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.2	Integer32	read-create	Size of local send window.
INT hpnicfdeSdlcPortModulo	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.3	INTEGER	read-create	Size of modulus.
I32 hpnicfdeSdlcPortMaxPdu	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.4	Integer32	read-create	Maximum bytes for incoming frames.
I32 hpnicfdeSdlcPortMaxSendQueue	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.5	Integer32	read-create	Size of hold queue.
I32 hpnicfdeSdlcPortMaxTransmission	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.6	Integer32	read-create	Number of times to retry an operation.
INT hpnicfdeSdlcPortSimultaneousEnable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.7	INTEGER	read-create	Activate SDLC two-way simultaneous mode.
I32 hpnicfdeSdlcPortTimerACK	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.8	Integer32	read-create	Time to wait for a reply to a frame.
I32 hpnicfdeSdlcPortTimerLifeTime	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.9	Integer32	read-create	Time to wait for a reply used by secondary station.
I32 hpnicfdeSdlcPortTimerPollPause	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.10	Integer32	read-create	Time between polls for each secondary SDLC station.
ROW hpnicfdeSdlcPortRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.11	RowStatus	read-create	RowStatus.
hpnicfdeLlc2	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6
hpnicfdeLlc2PortTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1		not-accessible	This table defines parameters for the Ethernet interface.
hpnicfdeLlc2PortEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1		not-accessible	LLC2 port entry.
I32 hpnicfdeLlc2PortMaxAck	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.1	Integer32	read-create	Maximum of I-frames received before ACK.
I32 hpnicfdeLlc2PortMaxPdu	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.2	Integer32	read-create	Maximum of LLC2 pdu length.
I32 hpnicfdeLlc2PortMaxSendQueue	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.3	Integer32	read-create	Queue for sending llc2 I-frames.
I32 hpnicfdeLlc2PortMaxTransmission	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.4	Integer32	read-create	Retry times of operations.
INT hpnicfdeLlc2PortModulo	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.5	INTEGER	read-create	Modulus of LLC2.
I32 hpnicfdeLlc2PortReceiveWindow	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.6	Integer32	read-create	Maximum number of I-frames to send before received ACK.
I32 hpnicfdeLlc2PortTimerAck	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.7	Integer32	read-create	Waiting for ACK time after sending an I-frame.
I32 hpnicfdeLlc2PortTimerAckDelay	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.8	Integer32	read-create	Maximum time allows I-frames incoming without replay ACK.
I32 hpnicfdeLlc2PortTimerDetect	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.9	Integer32	read-create	Detect the link status.
I32 hpnicfdeLlc2PortTimerBusy	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.10	Integer32	read-create	Waiting time while other LLC2 station is in busy state.
I32 hpnicfdeLlc2PortTimerPoll	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.11	Integer32	read-create	Waiting time after a P frame is sent.
I32 hpnicfdeLlc2PortTimerReject	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.12	Integer32	read-create	Waiting time after a REJ frame is sent.
ROW hpnicfdeLlc2PortRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.13	RowStatus	read-create	RowStatus.
hpnicfdeReachableCache	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7
hpnicfdeRchCacheStat	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1
I32 hpnicfdeRchCacheMaxIndex	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.1	Integer32	read-only	Maximum of hpnicfdeRchCacheIndex.
I32 hpnicfdeRchCacheNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.2	Integer32	read-only	The next value of hpnicfdeRchCacheIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeRchCacheTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows.
hpnicfdeRchCacheTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3		not-accessible	Reachable cache table.
hpnicfdeRchCacheEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1		not-accessible	Reachable cache entry.
I32 hpnicfdeRchCacheIndex	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.1	Integer32	not-accessible	Index of reachable cache entry.
INT hpnicfdeRchCacheStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.2	INTEGER	read-only	Current status of reachable cache entry.
TIK hpnicfdeRchCacheRemainTime	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.3	TimeTicks	read-only	Remain time of reachable cache entry.
ADR hpnicfdeRchCacheMac	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.4	MacAddressNC	read-create	MAC address of reachable cache entry.
IPt hpnicfdeRchCacheRemoteIpAddrType	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.5	InetAddressType	read-create	Remote peer ip address type.
IP hpnicfdeRchCacheRemoteIp	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.6	InetAddress	read-create	Remote peer ip address of reachable cache entry.
ROW hpnicfdeRchCacheRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.7	RowStatus	read-create	RowStatus.
hpnicfdeEthernetBackup	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8
hpnicfdeEBMacMapStat	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1
I32 hpnicfdeEBMacMapMaxIndex	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.1	Integer32	read-only	Maximum of hpnicfdeEBMacMapIndex.
I32 hpnicfdeEBMacMapNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.2	Integer32	read-only	The next value of hpnicfdeEBMacMapIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeEBMacMapTable. This makes it possible for the agent to control the index space of the MAC mapping tables, yet allows the manager to administratively create new rows.
hpnicfdeEBIfTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3		not-accessible	Information of interface which works for DLSw Ethernet redundancy.
hpnicfdeEBIfEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1		not-accessible	Parameters defined for DLSw Ethernet redundancy interface.
ADR hpnicfdeEBMulticastMac	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.1	MacAddressNC	read-create	Multicast MAC address configured for the Ethernet redundancy of dlsw module. When Ethernet redundancy is inactive, its value is '000000000000'H. To active Ethernet redundancy, give it a valid multicast MAC address.
I32 hpnicfdeEBPriority	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.2	Integer32	read-create	Priority configured for the Ethernet redundancy of DLSw module.
I32 hpnicfdeEBtimer	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.3	Integer32	read-create	Timer for the Ethernet redundancy of DLSw module.
ROW hpnicfdeEBRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.4	RowStatus	read-create	RowStatus.
hpnicfdeEBMacMapTable	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4		not-accessible	MAC address mapping table.
hpnicfdeEBMacMapEntry	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1		not-accessible	MAC address mapping entry.
I32 hpnicfdeEBMacMapIndex	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.1	Integer32	not-accessible	Index of MAC address mapping entry.
ADR hpnicfdeEBMacMapLocalMac	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.2	MacAddressNC	read-create	Local MAC address in MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
ADR hpnicfdeEBMacMapRemoteMac	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.3	MacAddressNC	read-create	Remote MAC address of MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
ADR hpnicfdeEBMacMapNeighbour	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.4	MacAddressNC	read-create	Neighbour of MAC address mapping.
ROW hpnicfdeEBMacMapRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.5	RowStatus	read-create	Status of MAC address mapping entry.

RFC description

Data Link Switching (DLSw) extensions for managing DLSw-specific protocol enhancements and TCP connections.

Start monitoring HP/H3C Comware WAN router running DLSw for SNA bridging (extended config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-SNA-DLSW-EXT-MIB