All MIBs › HPN-ICF-IPX-MIB › hpnicfIpxIfSplitHorizon
hpnicfIpxIfSplitHorizon
Module: HPN-ICF-IPX-MIB
OID (symbolic): HPN-ICF-IPX-MIB::hpnicfIpxIfSplitHorizon
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.4
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-create
Description: This node is used to set the split horizon status. Its default value is 'enabled'. In this case, the interface which receives a message can't send this message from the same interface. This function can avoid route loop. But it is unused for point to point link. If it is set to 'disabled', split horizon is disable.
What is hpnicfIpxIfSplitHorizon?
Enables (the default) or disables split horizon on this IPX interface, which normally prevents a route learned on an interface from being advertised back out that same interface to avoid routing loops; an admin disables it only on point-to-point links where it serves no purpose.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.34 | hpnicfIpx | HPN-ICF-IPX-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.34.1 | hpnicfIpxConfig | HPN-ICF-IPX-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.34.1.2 | hpnicfIpxIfConfigTable | HPN-ICF-IPX-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1 | hpnicfIpxIfConfigEntry | HPN-ICF-IPX-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.34.1.2.1.4 | hpnicfIpxIfSplitHorizon | HPN-ICF-IPX-MIB |