HPN-ICF-FLASH-MAN-MIB

All MIBs › HPN-ICF-FLASH-MAN-MIB

Last Updated: 2013-05-23

Category: Device Management, Hardware and Environment, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages flash memory partitions, files, and operations such as read/write/erase on HP/Comware networking devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-FLASH-MAN-MIB?

HPN-ICF-FLASH-MAN-MIB is an HP Networking (H3C-derived ICF platform) proprietary MIB (built on HCNUM-TC) managing Flash card storage. Its objects cover the number of supported Flash devices and a Flash table (index, size, position, name, chip count, description, init time, removable flag, partition-capable flag, min-partition size, max/current partitions, size in KB, high-capacity size), and a chip table (serial number, ID, description, write/erase-times limit and actual count). As a status MIB it lets an administrator confirm Flash card capacity and chip wear (write/erase cycle count) on an HP Networking device. It is deployed on HP Networking (H3C-derived) equipment (Flash card management). Engineers can download the HPN-ICF-FLASH-MAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-FLASH-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking (H3C-derived) equipment (Flash card management)

Monitoring Examples

An administrator checks hpnicfFlhChipWriteTimes against hpnicfFlhChipWriteTimesLimit to watch Flash chip wear on an HP Networking device.

What Can Be Monitored

Flash card capacity and chip wear (write/erase cycles)

Imported Objects

From ENTITY-MIB

PhysicalIndex

From HCNUM-TC

CounterBasedGauge64

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfFlhChipWriteTimes OID:

Select an HP Networking (H3C-derived) equipment (Flash card management) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfFlhChipWriteTimes into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of write times (retries) for the flash chip since initialization. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfFlash	1.3.6.1.4.1.11.2.14.11.15.2.5			This MIB contains objects to manage flash cards and flash card operations. There are no constraints on this MIB.
hpnicfFlashChips	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3
hpnicfFlashDevice	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1
hpnicfFlashEntry	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1		not-accessible	The entry of hpnicfFlashTable.
hpnicfFlashManMIBObjects	1.3.6.1.4.1.11.2.14.11.15.2.5.1
hpnicfFlashMIBConformance	1.3.6.1.4.1.11.2.14.11.15.2.5.2
hpnicfFlashMIBGroups	1.3.6.1.4.1.11.2.14.11.15.2.5.2.2
hpnicfFlashNotification	1.3.6.1.4.1.11.2.14.11.15.2.5.1.3
hpnicfFlashOperate	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2
hpnicfFlashPartitions	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4
hpnicfFlashTable	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2		not-accessible	This table gives the properties of all the flashes on the system.
STR hpnicfFlhChipDescr	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.3	DisplayString	read-only	The description of the flash chip.
hpnicfFlhChipEntry	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1		not-accessible	The entry of hpnicfFlhChipTable
C32 hpnicfFlhChipEraseTimes	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.7	Counter32	read-only	A count of erase times (retries) for the flash chip since initialization. A count of 2000 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after an erase operation, and report any errors accordingly.
I32 hpnicfFlhChipEraseTimesLimit	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.6	Integer32	read-only	The limit for the number of erase times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.
hpnicfFlhChipGroup	1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.3			A collection of objects on chip level information.
STR hpnicfFlhChipID	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.2	DisplayString	read-only	The manufacturer code (the upper byte) and device code (the lower byte) for a chip. Unknown chip code is presented as 00:00.
I32 hpnicfFlhChipNum	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.5	Integer32	read-only	The chip numbers in the flash.
I32 hpnicfFlhChipSerialNo	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.1	Integer32	not-accessible	Index of hpnicfFlhChipTable.
hpnicfFlhChipTable	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1		not-accessible	Table of properties for all flash chips. Used mainly for diagnostics.
C32 hpnicfFlhChipWriteTimesEx	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.5	Counter32	read-only	A count of write times (retries) for the flash chip since initialization. A count of 25 or more for a single chip indicates a write error. Management stations should note the value of this MIB before and after a write operation, and report any errors accordingly.
I32 hpnicfFlhChipWriteTimesLimit	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.3.1.1.4	Integer32	read-only	The limit for the number of write times (retries) for a flash chip. If the limit is exceeded an error should be reported by the management station.
STR hpnicfFlhDescr	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.6	DisplayString	read-only	Description of the purpose of the flash in the system.
OCT hpnicfFlhFileChecksum	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.5	OCTET STRING	read-only	The file checksum in the header of file.
hpnicfFlhFileEntry	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1		not-accessible	An entry representing a file. Indexed using flash number, partition number, and file number.
hpnicfFlhFileGroup	1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.5			A collection of objects on file level information.
NUM hpnicfFlhFileHCSize	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.6	CounterBasedGauge64	read-only	The file size in bytes. This node is a 64-bit substitue for hpnicfFlhFileSize.
I32 hpnicfFlhFileIndex	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.1	Integer32	not-accessible	Index of the table, whose range is from 1 to 2147483647
STR hpnicfFlhFileName	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.2	DisplayString	read-only	A valid file name supported by the file system.
hpnicfFlhFiles	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2
I32 hpnicfFlhFileSize	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.3	Integer32	read-only	The file size in bytes excluding the file header of file system. The value should be greater than zero. If the file size exceeds 2,147,483,647 bytes, hpnicfFlhFileHCSize specifies the actual size.
INT hpnicfFlhFileStatus	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1.1.4	INTEGER	read-only	The status should be as follows: deleted(1): The file is in recycle bin. invalidChecksum(2): The checksum of file is invalid; valid(3): A valid file.
hpnicfFlhFileTable	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.2.1		not-accessible	Table of file information.
hpnicfFlhGroup	1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.1			A collection of objects on Flash level information.
NUM hpnicfFlhHCSize	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.16	CounterBasedGauge64	read-only	Specifies the total size of the flash indexed by hpnicfFlhIndex. This node is a 64-bit substitute for hpnicfFlhSize.
I32 hpnicfFlhIndex	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.1	Integer32	read-only	The index of hpnicfFlashTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + entity index + random index + + ( bit 16..31 ) ( bit 0..15 ) + +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), it has a minimum value of 1, and maximum value of the same as the value of hpnicfFlhSupportNum. From bit16 to bit31 (two bytes), it is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB.
TIM hpnicfFlhInitTime	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.8	TimeStamp	read-only	The initialization time for the flash component or partition, recorded using the system time. This will be the boot time for a fixed device. For a removable component or a partition, it will be the initialization time.
I32 hpnicfFlhKbyteSize	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.15	Integer32	read-only	Specifies the total size of the flash device indexed by hpnicfFlhIndex. The value should be zero if the flash is removed for a removable device.
I32 hpnicfFlhMaxPartitions	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.13	Integer32	read-only	The maximum count of partitions which the system supports for this flash. If hpnicfFlhPartitionBool is false, the object value is 1.
hpnicfFlhMIBCompliance	1.3.6.1.4.1.11.2.14.11.15.2.5.2.1.1			The statement of compliance for those implementing this MIB.
hpnicfFlhMIBCompliances	1.3.6.1.4.1.11.2.14.11.15.2.5.2.1
I32 hpnicfFlhMinPartitionSize	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.12	Integer32	read-only	Minimum partition size supported. If hpnicfFlhDevicePartitionBool is false, the value of this object is the same as hpnicfFlhSize.
STR hpnicfFlhName	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.4	DisplayString	read-only	The flash name within the system.
hpnicfFlhNotificationGroup	1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.7			The collection of notifications in the module
hpnicfFlhOpEntry	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1		not-accessible	Note an operation can not be stopped until it is finished. If notification is configured, NMS will receive a notification at the end of the operation. Entries in the table will be removed automatically in 5 minutes. It can also be deleted by NMS directly.
hpnicfFlhOperationGroup	1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.6			A collection of objects of flash operations.
STR hpnicfFlhOperDestinationFile	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.8	DisplayString	read-create	Specifies the destination file name. It may be located on flash or remote server. It may include the file path if it is applicable. If it is not specified, the destination file name is the same as source file name for application.
T/F hpnicfFlhOperEndNotification	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.10	TruthValue	read-create	If the value of it is specified 'true', a notification will be generated at the end of the operation. Else no notification will be generated.
STR hpnicfFlhOperFailReason	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.14	DisplayString	read-only	The failure reasons of operation.
I32 hpnicfFlhOperIndex	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.1	Integer32	not-accessible	Specifies the index of an entry. It is a random value when creating an entry.
NTF hpnicfFlhOperNotification	1.3.6.1.4.1.11.2.14.11.15.2.5.1.3.1			A hpnicfFlhOperNotification is sent at the completion of a flash copy operation if hpnicfFlhOperEndNotification is true.
STR hpnicfFlhOperPassword	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.6	DisplayString	read-create	Remote user password for copying via ftp protocol. Optionally, This object may be ignored for protocols other than ftp.
TIK hpnicfFlhOperProgress	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.11	TimeTicks	read-only	The progress described as the time taken for the operation.
INT hpnicfFlhOperProtocol	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.3	INTEGER	read-create	Specifies the protocol used to transfer file. The default protocol is ftp. when 'clusterftp' or 'clustertftp' is selected, the hpnicfFlhOperServerAddress needn't be set, the server address can be acquired automatically, the value of hpnicfFlhOperServerAddress is uncertain during operation. Both member switch and commander switch can use them if they support HGMP v2.
ROW hpnicfFlhOperRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.12	RowStatus	read-create	The row status of this table entry.
IP hpnicfFlhOperServerAddress	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.4	IpAddress	read-create	The address of remote host acting as server for operation. The default value is 255.255.255.255 This object is replaced by hpnicfFlhOperSrvAddrRev for it only support IPv4.
I32 hpnicfFlhOperServerPort	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.13	Integer32	read-create	The port of remote host acting as server for operation. If the value of this object is not specified, the server port is the known protocol port.
STR hpnicfFlhOperServerUser	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.5	DisplayString	read-create	When using ftp to transfer files, the user name must be specified through this node.
STR hpnicfFlhOperSourceFile	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.7	DisplayString	read-create	Specifies the source file name to be transferred. It may be located on flash or remote server. It may include the file path if it is applicable. It must be specified.
IP hpnicfFlhOperSrvAddrRev	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.16	InetAddress	read-create	The address of remote host acting as server for operation.
IPt hpnicfFlhOperSrvAddrType	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.15	InetAddressType	read-create	The type of IP address for hpnicfFlhOperSrvAddrRev.
STR hpnicfFlhOperSrvVPNName	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.17	DisplayString	read-create	The VPN instance of this operation uses.
HPN hpnicfFlhOperStatus	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.9	HpnicfFlashOperationStatus	read-only	The status of operation.
INT hpnicfFlhOperType	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1.1.2	INTEGER	read-create	Specifies the operation to be executed. net2FlashWithErase Copy a file to flash; erase flash beforehand. net2FlashWithoutErase Copy a file to flash; do not erase flash beforehand. flash2Net Copy a file from flash. delete Delete a file from flash, the file name is specified by hpnicfFlhOperSourceFile; rename Change a file's name.
hpnicfFlhOpTable	1.3.6.1.4.1.11.2.14.11.15.2.5.1.2.1		not-accessible	Table used to operate flash.
T/F hpnicfFlhPartBootable	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.13	TruthValue	read-only	The value indicates whether the partition is a bootable partition. The true(1) value indicates a bootable partition.
INT hpnicfFlhPartChecksumMethod	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.7	INTEGER	read-only	The Checksum method which the file system uses.
I32 hpnicfFlhPartFileNameLen	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.12	Integer32	read-only	The maximum length of file name supported in the system.
I32 hpnicfFlhPartFileNum	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.6	Integer32	read-only	The number of all the files in the flash partition.
I32 hpnicfFlhPartFirstChip	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.2	Integer32	read-only	The first chip's sequence number in the partition, by which a chip can be indexed in chip table.
NUM hpnicfFlhPartHCSpace	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.15	CounterBasedGauge64	read-only	The total space of the flash partition. This node is a 64-bit substitue for hpnicfFlhPartSpace.
NUM hpnicfFlhPartHCSpaceFree	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.16	CounterBasedGauge64	read-only	The flash partition's free space. This node is a 64-bit substitue for hpnicfFlhPartSpace.
I32 hpnicfFlhPartIndex	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.1	Integer32	not-accessible	An index which specifies a sequenced partition in the system.
T/F hpnicfFlhPartitionBool	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.11	TruthValue	read-write	The value indicates whether the flash indexed can be partitioned or not. The true(1) value indicates the flash CAN be partitioned.
hpnicfFlhPartitionEntry	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1		not-accessible	An entry of the hpnicfFlhPartitionTable.Indexed by flash number and partition number.
hpnicfFlhPartitionGroup	1.3.6.1.4.1.11.2.14.11.15.2.5.2.2.4			A collection of objects providing on partition level information.
I32 hpnicfFlhPartitionNum	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.14	Integer32	read-only	The actual number of partitions supported by the system for this flash. If hpnicfFlhPartitionBool is false, this value is 1.
hpnicfFlhPartitionTable	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1		not-accessible	Properties for the flash partitions. Minimum of one entry in this table.
I32 hpnicfFlhPartLastChip	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.3	Integer32	read-only	The last chip's sequence number in the partition, by which a chip can be indexed in chip table.
STR hpnicfFlhPartName	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.10	DisplayString	read-only	The name of the flash partition given by the system.
T/F hpnicfFlhPartPathForGlobalOpt	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.14	TruthValue	read-write	The value indicates whether the partition is used in a global file operation. The true(1) value indicates that in one global file operation files will be copied to or deleted from this partition. When hpnicfFlhPartPathForGlobalOpt in one entry is set to true(1), hpnicfFlhPartPathForGlobalOpt in other entries with the same entity index will be set to false(0).
T/F hpnicfFlhPartRequireErase	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.11	TruthValue	read-only	Shows whether a write operation is conditional on partition erase.
I32 hpnicfFlhPartSpace	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.4	Integer32	read-only	The total space of the flash partition. The following should be satisfied: hpnicfFlhPartSpace = n*hpnicfFlhMinPartitionSize If the total size of the flash partition exceeds 2,147,483,647 bytes, hpnicfFlhPartHCSpace specifies the actual size.
G32 hpnicfFlhPartSpaceFree	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.5	Gauge32	read-only	The flash partition's free space. If the free space of the flash partition exceeds 2,147,483,647 bytes, hpnicfFlhPartHCSpaceFree specifies the actual free space.
HPN hpnicfFlhPartStatus	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.8	HpnicfFlashPartitionStatus	read-only	The flash partition status.
HPN hpnicfFlhPartUpgradeMode	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.4.1.1.9	HpnicfFlashPartitionUpgradeMode	read-only	The upgrade mode of the Flash partition
PHY hpnicfFlhPos	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.3	PhysicalIndex	read-only	The position of the flash device in system. This object is an index of entPhysicalTable in ENTITY-MIB. If the value of this object is 0, the main processor is indicated.
T/F hpnicfFlhRemovable	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.9	TruthValue	read-only	The value indicates whether the flash indexed can be removed or not. The true(1) value indicates the flash device CAN be removed.
I32 hpnicfFlhSize	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.2.1.2	Integer32	read-only	Specifies the total size of the flash indexed by hpnicfFlhIndex. The value should be zero if the flash is removed for a removable device. If the total size of the flash exceeds 2,147,483,647 bytes, hpnicfFlhHCSize specifies the actual size.
I32 hpnicfFlhSupportNum	1.3.6.1.4.1.11.2.14.11.15.2.5.1.1.1	Integer32	read-only	Specifies the total number of flash which the system supported. The MIB should not be loaded if there is no flash in the system and so the value here will be a minimum of 1.

RFC description

An HP Integrated Communication Facility MIB for flash storage management. Provides SNMP objects for managing file systems, storage partitions, and flash memory devices on HP networking equipment.

Start monitoring HP Networking (H3C-derived) equipment (Flash card management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-FLASH-MAN-MIB