HPN-ICF-FLOWTEMPLATE-MIB

All MIBs › HPN-ICF-FLOWTEMPLATE-MIB

Last Updated: 2005-11-24

Category: Technology: NetFlow, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Defines flow template configuration for NetFlow/sFlow-style traffic sampling export on HP/Comware devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-FLOWTEMPLATE-MIB?

This is a proprietary HP Networking ICF (Intelligent Configuration Framework, common to Comware-based devices) MIB for configuring flow templates used in NetFlow/sFlow/NetStream-style traffic sampling and export. Based on the module description alone, since no sample objects were provided, it manages template definitions governing how sampled flow records are structured and exported to a collector. It is a configuration-oriented MIB whose monitoring value would lie in confirming flow-template/export settings are correctly applied on a device's interfaces, rather than exposing hardware health counters directly. No explicit dependency is stated, though flow templates typically work alongside the device's NetStream/sFlow export and interface MIBs to determine what traffic-sampling data gets generated. It is typically deployed on HP/H3C Comware-based switches and routers in networks using flow-based traffic analysis for capacity planning and anomaly detection. Engineers can download the HPN-ICF-FLOWTEMPLATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-FLOWTEMPLATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking / H3C Comware-based switch or router

Monitoring Examples

No object or table names were supplied for this module, so a concrete polling scenario cannot be responsibly specified. Based on the description, an administrator would typically verify the flow template configuration matches the intended sampling/export format before troubleshooting missing or malformed flow records at the NetFlow/sFlow collector.

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfFlowTemplate	1.3.6.1.4.1.11.2.14.11.15.2.64			Flow template management information base.
hpnicfFlowTemplateMibObject	1.3.6.1.4.1.11.2.14.11.15.2.64.1
hpnicfFTConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1
I32 hpnicfFTGroupNextIndex	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.1	Integer32	read-only	This object contains an appropriate value to be used for hpnicfFTGroupIndex when creating rows in the hpnicfFTGroupTable. If it is 2147483647, it denotes that hpnicfFTGroupTable can't create any instance.
hpnicfFTGroupTable	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2		not-accessible	A table of flow template group. A flow template group, which is applied to interface, must use hpnicfFTGroupTable to create a instance and hpnicfFTBasicGroupTable or hpnicfFTExtendGroupTable to configure flow template's need item. A basic flow template must use hpnicfFTBasicGroupTable to configure some basic flow template's need item, such as: address, protocol, priority. A extend flow template must use hpnicfFTExtendGroupTable to configure packet's type and offset and length.
hpnicfFTGroupEntry	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1		not-accessible	Flow template group information.
I32 hpnicfFTGroupIndex	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.1	Integer32	not-accessible	Flow template group index.
OCT hpnicfFTGroupName	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.2	OCTET STRING	read-create	Flow template group name.
INT hpnicfFTGroupType	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.3	INTEGER	read-create	Type of flow template.
ROW hpnicfFTGroupRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.2.1.4	RowStatus	read-create	RowStatus.
hpnicfFTBasicGroupTable	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3		not-accessible	A table of basic flow template group.
hpnicfFTBasicGroupEntry	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1		not-accessible	Basic flow template group information.
BIT hpnicfFTBasicGroupAddressType	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.1	Bits	read-create	Type of MAC and IP address. This is a bit-map of possible conditions. The various bit positions are: sourceIpv4Address source IPv4's address destIPv4Address destination IPv4's address sourceIPv6Address source IPv6 address destIPv6Address destination IPv6 address sourceMacAddress source MAC address destMacAddress destination MAC address
BIT hpnicfFTBasicGroupPriorityType	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.2	Bits	read-create	Type of priority. This is a bit-map of possible conditions. The various bit positions are: vlanID VlanID cos 802.1p priority topVlanID VlanID of top layer topCos 802.1p priority of top layer fragment fragment tcpFlag TCP flag tos type of service dscp DSCP ipprecedence IP precedence
BIT hpnicfFTBasicGroupProtocolType	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.3	Bits	read-create	Type of protocol. This is a bit-map of possible conditions. The various bit positions are: l2Potocol layer 2 protocol ipv4L3Protocol layer 3 protocol of IPv4 ipv6L3Protocol layer 3 protocol of IPv6 icmpProtocolType Type of ICMP protocol of IPv4 icmpProtocolCode Code of ICMP protocol of IPv4 icmpv6ProtocolType Type of ICMP protocol of IPv6 icmpv6ProtocolCode Code of ICMP protocol of IPv6 sourceL4Port port of layer 4 of source destL4Port port of layer 4 of destination
MAC hpnicfFTBasicGroupSMacWildCard	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.4	MacAddress	read-create	Source MAC address field in Ethernet packet head.
MAC hpnicfFTBasicGroupDMacWildCard	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.5	MacAddress	read-create	Destination MAC address field in Ethernet packet head.
ROW hpnicfFTBasicGroupRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.3.1.6	RowStatus	read-create	RowStatus.
hpnicfFTExtendGroupTable	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4		not-accessible	A table of extend flow template group information.
hpnicfFTExtendGroupEntry	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1		not-accessible	Extend flow template group information entry.
INT hpnicfFTExtendGroupOffsetType	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.1	INTEGER	not-accessible	Offset type of the packet. start Offset from the start of the packet mpls Offset from the head of MPLS l2 Offset from the head of the L2 frame l4 Offset from the head of L4 packet l5 Offset from the head of the L5 packet ipv4 Offset from the head of the IPv4 packet ipv6 Offset from the head of the IPv6 packet
I32 hpnicfFTExtendGroupOffsetMaxValue	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.2	Integer32	read-create	The max value of offset.
I32 hpnicfFTExtendGroupLengthMaxValue	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.3	Integer32	read-create	The max value of length.
ROW hpnicfFTExtendGroupRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.64.1.1.4.1.4	RowStatus	read-create	RowStatus.
hpnicfFTApplyGroup	1.3.6.1.4.1.11.2.14.11.15.2.64.1.2
hpnicfFTIfApplyTable	1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1		not-accessible	A table of any interface with flowtemplate. A flow template, which will be applied interface, is an instance at hpnicfFTGroupTable and hpnicfFTBasicGroupTable or hpnicfFTExtendGroupTable. A basic flow template is an instance at hpnicfFTGroupTable and hpnicfFTBasicGroupTable, and the instance's RowStatus must be 'active' at each table. A extend flow template is an instance at hpnicfFTGroupTable and hpnicfFTExtendGroupTable, and the instance's RowStatus must be 'active' at each table.
hpnicfFTIfApplyEntry	1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1.1		not-accessible	Any interface with flowtemplate information.
OCT hpnicfFTIfApplyGroupName	1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1.1.1	OCTET STRING	read-only	The name of flow template.
ROW hpnicfFTIfApplyRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.64.1.2.1.1.2	RowStatus	read-create	RowStatus.

RFC description

HP Networking ICF (ICF) MIB providing SNMP objects for flow template management and configuration on HP networking equipment for network flow monitoring.

Start monitoring HP Networking / H3C Comware-based switch or router (NetStream/sFlow flow templates) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-FLOWTEMPLATE-MIB

What Is HPN-ICF-FLOWTEMPLATE-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description