HPN-ICF-EOC-COMMON-MIB

All MIBs › HPN-ICF-EOC-COMMON-MIB

Last Updated: 2007-09-11

Description: HPN-ICF-EOC-COMMON-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-EOC-COMMON-MIB?

HPN-ICF-EOC-COMMON-MIB defines shared management objects common to both Ethernet-over-Cable (EOC, HomePlug AV-based) and Ethernet-in-the-First-Mile Passive Optical Network (EFM/PON per IEEE 802.3ah) access technologies on HP Networking devices, used in fiber/coax last-mile access deployments. It exposes system-level version and MAC address information (hpnicfEOCCommonSysVersion, hpnicfEOCCommonUpLinkMacAddress) plus per-client management tables (hpnicfEOCCommonCltManTable) covering client auto-authorization and maximum allowed access counts, alongside bandwidth-limit configuration ranges for CNU (Customer Network Unit) devices' upstream/downstream/high-priority SLA bandwidth. Its monitoring focus is on the software/service status of last-mile access clients: confirming firmware/system version, verifying whether client auto-authorization is functioning to prevent unauthorized CNUs from joining, and checking configured bandwidth limits are within the allowed min/max ranges. It shares its data model conceptually with IEEE 802.3ah EFM standards and HomePlug AV specifications but is a vendor-specific implementation on top of them. It is deployed by network operators running fiber/coax access aggregation using HP Networking EOC/EPON aggregation equipment to manage subscriber CNU/CLT devices. Engineers can download the HPN-ICF-EOC-COMMON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-EOC-COMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking EOC/EFM access aggregation device
CNU (Customer Network Unit)

Monitoring Examples

An operator can poll hpnicfEOCCommonCltManTable's hpnicfEOCCommonCltAutoAuthorize and hpnicfEOCCommonCltMaxAllowToAccess to confirm a client line is only allowing the expected number of authorized CNUs, and check hpnicfEOCComCnuMaxDownBWMinVal/MaxVal ranges to verify a subscriber's provisioned bandwidth cap falls within policy; a CNU exceeding hpnicfEOCComCnuSlaHighPriBWMaxVal would indicate an SLA violation needing throttling.

What Can Be Monitored

system/firmware version
client auto-authorization status
max allowed client access count
upstream/downstream bandwidth limit ranges
SLA high-priority bandwidth limits

Imported Objects

From HPN-ICF-HPEOC-MIB

hpnicfHPEOCDownLoadCNUFWResult

OBJECT-TYPE

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IANAifType-MIB

IANAifType

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfEOCComUniCurrentSpeed OID:

Select an HP Networking access aggregation device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfEOCComUniCurrentSpeed into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports an estimate of the interface's current bandwidth in bits per second. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the rate climbs well above its normal baseline, since a sustained spike often reflects real load growth or a runaway process. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfEOCCommon	1.3.6.1.4.1.11.2.14.11.15.2.83			The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification.
hpnicfEOCCommonSysMan	1.3.6.1.4.1.11.2.14.11.15.2.83.1
hpnicfEOCCommonSysScalarObjects	1.3.6.1.4.1.11.2.14.11.15.2.83.1.1
OCT hpnicfEOCCommonSysVersion	1.3.6.1.4.1.11.2.14.11.15.2.83.1.1.1	OCTET STRING	read-only	Eoc version. If the object length is zero, it means the version is unknown. The length is up to 1024.
MAC hpnicfEOCCommonUpLinkMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.83.1.1.2	MacAddress	read-only	EOC CLT's uplink device's mac address.
hpnicfEOCCommonCltMan	1.3.6.1.4.1.11.2.14.11.15.2.83.2
hpnicfEOCCommonCltManTable	1.3.6.1.4.1.11.2.14.11.15.2.83.2.1		not-accessible	This table defines the primary parameters of the CLT configuration.
hpnicfEOCCommonCltManEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1		not-accessible	The entry of the table hpnicfEOCCommonCltManTable.
T/F hpnicfEOCCommonCltAutoAuthorize	1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1.1	TruthValue	read-write	This value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically.
I32 hpnicfEOCCommonCltMaxAllowToAccess	1.3.6.1.4.1.11.2.14.11.15.2.83.2.1.1.2	Integer32	read-write	This value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access.
hpnicfEOCComCnuMan	1.3.6.1.4.1.11.2.14.11.15.2.83.3
hpnicfEOCComCnuScalarObjects	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1
I32 hpnicfEOCComCnuMaxDownBWMinVal	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.1	Integer32	read-only	The lower limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxDownBW.
I32 hpnicfEOCComCnuMaxDownBWMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.2	Integer32	read-only	The upper limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxDownBW.
I32 hpnicfEOCComCnuSlaHighPriBWMinVal	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.3	Integer32	read-only	The lower limit of high priority bandwidth which is confined to hpnicfEOCComCnuSlaHighPriBW.
I32 hpnicfEOCComCnuSlaHighPriBWMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.4	Integer32	read-only	The upper limit of high priority bandwidth which is confined to hpnicfEOCComCnuSlaHighPriBW.
I32 hpnicfEOCComCnuMaxUpBWMinVal	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.5	Integer32	read-only	The lower limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxUpBW.
I32 hpnicfEOCComCnuMaxUpBWMaxVal	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.6	Integer32	read-only	The upper limit of total-bandwidth which is confined to hpnicfEOCComCnuMaxUpBW.
I32 hpnicfEOCComCnuAttenThrA	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.7	Integer32	read-write	The value of cnu's average attenuation good level thresholds.
I32 hpnicfEOCComCnuAttenThrB	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.8	Integer32	read-write	The value of cnu's average attenuation normal level thresholds.
I32 hpnicfEOCComCnuRateDropThr	1.3.6.1.4.1.11.2.14.11.15.2.83.3.1.9	Integer32	read-write	The value of cnu's Tx/Rx rate drop thresholds.
hpnicfEOCComCnuSysManTable	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2		not-accessible	This table implements the management of CNUs(Coax Network Unit).
hpnicfEOCComCnuSysManEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1		not-accessible	The entry of the table hpnicfEOCComCnuSysManTable.
I32 hpnicfEOCComCnuCableIfindex	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.1	Integer32	read-only	The index of cable port which uniquely identifies the cable port of one device.
STR hpnicfEOCComCnuDeviceType	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.2	DisplayString	read-write	The type of the EOC CNU(Coax Network Unit).
STR hpnicfEOCComCnuDeviceAlias	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.3	DisplayString	read-write	EOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably.
STR hpnicfEOCComCnuDescr	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.4	DisplayString	read-write	User's description, including user's address, name, telephone number and so on.
TIK hpnicfEOCComCnuUpTime	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.5	TimeTicks	read-only	The time since the CNU last registered to the network.
INT hpnicfEOCComCnuVLANType	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.6	INTEGER	read-write	port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
I32 hpnicfEOCComCnuPvid	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.7	Integer32	read-write	The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface.
INT hpnicfEOCComCnuVlanTag	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.8	INTEGER	read-write	VLAN is set tagged or untagged on cable interface.
INT hpnicfEOCComCnuReset	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.9	INTEGER	read-write	This variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time.
INT hpnicfEOCComCnuDeregister	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.10	INTEGER	read-write	deregister CNU.
INT hpnicfEOCComCnuSave	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.11	INTEGER	read-write	Save the UNI and CNU related configurations to the CNU.
INT hpnicfEOCComCnuAccess	1.3.6.1.4.1.11.2.14.11.15.2.83.3.2.1.12	INTEGER	read-write	Control whether the user can access to the network.
hpnicfEOCComCnuMacTable	1.3.6.1.4.1.11.2.14.11.15.2.83.3.3		not-accessible	This table implements the management of CNUs.
hpnicfEOCComCnuMacEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1		not-accessible	The entry of the table hpnicfEOCComCnuMacTable.
MAC hpnicfEOCComCnuMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.1	MacAddress	read-create	EOC CNU's MAC address.
ROW hpnicfEOCComCnuRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.2	RowStatus	read-create	Operation status.
I32 hpnicfEOCComCnuTempIndex	1.3.6.1.4.1.11.2.14.11.15.2.83.3.3.1.3	Integer32	read-write	EOC CNU's model index from hpnicfHPEOCTemplateIndex, If configure 0, the CNU select no model.
hpnicfEOCComCnuInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4		not-accessible	Primary status of the specified CNU. There will be one row in this table for each information in the system.
hpnicfEOCComCnuInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1		not-accessible	The entry of the hpnicfEOCComCnuInfoTable.
STR hpnicfEOCComCnuHardwareVersion	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.1	DisplayString	read-only	EOC CNU's hardware version. If the object length is zero, it means the version is unknown.
OCT hpnicfEOCComCnuPCBVersion	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.2	OCTET STRING	read-only	EOC CNU's PCB version.
INT hpnicfEOCComCnuLinkState	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.3	INTEGER	read-only	The cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful. The loopback(4) state indecates that the CNU is powered on and registers successful, but loopback has detected.
I32 hpnicfEOCComCnuAttenuation	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.4	Integer32	read-only	The cnu's average attenuation.
STR hpnicfEOCComCnuSoftwareVersion	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.5	DisplayString	read-only	EOC CNU's software version. If the object length is zero, it means the version is unknown.
I32 hpnicfEOCComCnuTxRate	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.6	Integer32	read-only	The cnu's capability of tx speed in unit of 1Mbps.
I32 hpnicfEOCComCnuRxRate	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.7	Integer32	read-only	The cnu's capability of rx speed in unit of 1Mbps.
I32 hpnicfEOCComCnuTxRateDrop	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.8	Integer32	read-only	The cnu's capability droping of tx speed from it's history max value in unit of %.
I32 hpnicfEOCComCnuRxRateDrop	1.3.6.1.4.1.11.2.14.11.15.2.83.3.4.1.9	Integer32	read-only	The cnu's capability droping of rx speed from it's history max value in unit of %.
hpnicfEOCComCnuBandWidthTable	1.3.6.1.4.1.11.2.14.11.15.2.83.3.5		not-accessible	Set bandwidth parameters.
hpnicfEOCComCnuBandWidthEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1		not-accessible	The entry of table hpnicfEOCComCnuBandWidthTable. It is a pre-configuration.
I32 hpnicfEOCComCnuMaxDownBW	1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.1	Integer32	read-write	Maximum bandwidth allowed for the CNU, measured in Kbit/s.
I32 hpnicfEOCComCnuSlaHighPriBW	1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.2	Integer32	read-write	High priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth.
I32 hpnicfEOCComCnuMaxUpBW	1.3.6.1.4.1.11.2.14.11.15.2.83.3.5.1.3	Integer32	read-write	Total bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hpnicfEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth.
hpnicfEOCComUniMan	1.3.6.1.4.1.11.2.14.11.15.2.83.4
hpnicfEOCComUniManTable	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1		not-accessible	This table defines several user network interface(UNI) system parameters.
hpnicfEOCComUniManEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1		not-accessible	The entry of hpnicfEOCComUniManTable.
U32 hpnicfEOCUniIndex	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.1	Unsigned32	not-accessible	The index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU.
STR hpnicfEOCComUniDescr	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.2	DisplayString	read-only	A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software.
INT hpnicfEOCComUniStatus	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.3	INTEGER	read-write	The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hpnicfEOCComUniStatus is then changed to either the up or testing states (or remains in the down state).
INT hpnicfEOCComUniSpeed	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.4	INTEGER	read-write	User network interface speed.
INT hpnicfEOCComUniDuplex	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.5	INTEGER	read-write	User network interface mode.
G32 hpnicfEOCComUniCurrentSpeedEx	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.6	Gauge32	read-only	An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero.
INT hpnicfEOCComUniCurrentDuplex	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.7	INTEGER	read-only	The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
INT hpnicfEOCComUniMdi	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.8	INTEGER	read-write	Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing).
T/F hpnicfEOCComUniFlowControl	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.9	TruthValue	read-write	Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable.
INT hpnicfEOCComUniCountReset	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.10	INTEGER	read-write	Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object.
STR hpnicfEOCComUniAlias	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.11	DisplayString	read-write	This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of hpnicfEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of hpnicfEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the hpnicfEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and hpnicfEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of hpnicfEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces.
IAN hpnicfEOCComUniType	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.12	IANAifType	read-only	The type of interface. Additional values for hpnicfEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention.
INT hpnicfEOCComUniVLANType	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.13	INTEGER	read-write	port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.
I32 hpnicfEOCComUniPvid	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.14	Integer32	read-write	The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port.
INT hpnicfEOCComUniVlanTag	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.15	INTEGER	read-write	VLAN is set tagged or untagged.
I32 hpnicfEOCComUniPriority	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.16	Integer32	read-write	The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority.
U32 hpnicfEOCComUniUpLineRate	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.17	Unsigned32	read-write	The max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line.
U32 hpnicfEOCComUniDownLineRate	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.18	Unsigned32	read-write	The max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line.
INT hpnicfEOCComUniAdminStatus	1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.19	INTEGER	read-write	Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard.
hpnicfEOCComUniCountTable	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2		not-accessible	A list of interface counter about frames entries.
hpnicfEOCComUniCountEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1		not-accessible	An entry containing management information applicable to a particular interface.
U32 hpnicfEOCUniInPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.1	Unsigned32	read-only	The total number of packets (including bad packets, broadcast packets, and multicast packets) received.
U32 hpnicfEOCUniInUPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.2	Unsigned32	read-only	The total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
U32 hpnicfEOCUniInBPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.3	Unsigned32	read-only	The total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets.
U32 hpnicfEOCUniInMPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.4	Unsigned32	read-only	The total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
U32 hpnicfEOCUniInPausePkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.5	Unsigned32	read-only	A count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
U32 hpnicfEOCUniInTotalErrors	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.6	Unsigned32	read-only	Total count of the error packets received on this interface.
U32 hpnicfEOCUniInCRCErrs	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.7	Unsigned32	read-only	The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
U32 hpnicfEOCUniInUndersizePkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.8	Unsigned32	read-only	The total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed.
U32 hpnicfEOCUniInOversizePkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.9	Unsigned32	read-only	The total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed.
U32 hpnicfEOCUniInErrorbyOther	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.10	Unsigned32	read-only	The total number of other error packets received on this interface.
U32 hpnicfEOCUniInOctets	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.11	Unsigned32	read-only	The total number of octets received on this interface.
U32 hpnicfEOCUniOutPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.12	Unsigned32	read-only	The total number of packets (including bad packets, broadcast packets, and multicast packets) sent.
U32 hpnicfEOCUniOutUPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.13	Unsigned32	read-only	The total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets.
U32 hpnicfEOCUniOutBPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.14	Unsigned32	read-only	The total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets.
U32 hpnicfEOCUniOutMPkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.15	Unsigned32	read-only	The total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
U32 hpnicfEOCUniOutPausePkts	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.16	Unsigned32	read-only	The total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system.
U32 hpnicfEOCUniOutTotalErrors	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.17	Unsigned32	read-only	The total number of error packets sent on this interface.
U32 hpnicfEOCUniOutCollisions	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.18	Unsigned32	read-only	The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected.
U32 hpnicfEOCUniOutDelayExceedDsds	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.19	Unsigned32	read-only	The number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges.
U32 hpnicfEOCUniOutErrorbyOther	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.20	Unsigned32	read-only	The total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets.
U32 hpnicfEOCUniOutDroppedFrames	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.21	Unsigned32	read-only	The total number of frames dropped because of buffer failure.
U32 hpnicfEOCUniOutOctets	1.3.6.1.4.1.11.2.14.11.15.2.83.4.2.1.22	Unsigned32	read-only	The total number of octets transmitted out of the interface.
hpnicfEOCCommonTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5
hpnicfEOCTrapPrefix	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0
NTF hpnicfEOCCnuRegExcessTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.1			A hpnicfEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit.
NTF hpnicfEOCCnuRegExcessRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.2			A hpnicfEOCCnuRegExcessRecoverTrap notification is sent when hpnicfEOCCnuRegExcessTrap is detected and then recoverd.
NTF hpnicfEOCCnuRegSuccTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.3			A hpnicfEOCCnuRegSuccTrap notification is sent when a CNU registers successful.
NTF hpnicfEOCCnuOffLineTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.4			A hpnicfEOCCnuOffLineTrap notification is sent when a CNU offline.
NTF hpnicfEOCCnuLinkupTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.5			A hpnicfEOCCnuLinkupTrap notification is sent when a CNU linkup.
NTF hpnicfEOCOamDisconnectTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.6			A hpnicfEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected.
NTF hpnicfEOCOamDisconnectRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.7			A hpnicfEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected.
NTF hpnicfEOCBandwidthNotEnoughTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.8			Bandwidth is not enough, cnu can not bind now.
NTF hpnicfEOCCnuAttenuationTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.9			A hpnicfHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing.
NTF hpnicfEOCCnuRegFailTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.10			A hpnicfEOCCnuRegFailTrap notification is sent when a CNU registers fail.
NTF hpnicfEOCCLTCablePortErrorTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.11			A hpnicfEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error.
NTF hpnicfEOCCLTCablePortErrReTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.12			A hpnicfEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered.
NTF hpnicfEOCCnuTxRateDropTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.13			A hpnicfEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold.
NTF hpnicfEOCCnuTxRateDropRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.14			A hpnicfEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap.
NTF hpnicfEOCCnuRxRateDropTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.15			A hpnicfEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold.
NTF hpnicfEOCCnuRxRateDropRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.16			A hpnicfEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap.
NTF hpnicfEOCCnuFWDownLoadErrTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.17			A hpnicfEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully.
NTF hpnicfEOCCnuFWDownLoadErrReTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.18			A hpnicfEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error.
NTF hpnicfEOCCnuDeviceTypeErrTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.19			A hpnicfEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier.
NTF hpnicfEOCCnuDeviceTypeErrReTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.20			A hpnicfEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover.
NTF hpnicfEOCCnuAutoUpdateErrTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.21			A hpnicfEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully.
NTF hpnicfEOCCnuAutoUpdateSuccTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.22			A hpnicfEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully.
NTF hpnicfEOCLoopbackDetectTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.23			A hpnicfEOCLoopbackDetectTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is found.
NTF hpnicfEOCLoopbackRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.83.5.0.24			A hpnicfEOCLoopbackRecoverTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is recover.
hpnicfEOCComOnLineCnuMan	1.3.6.1.4.1.11.2.14.11.15.2.83.6
hpnicfEOCComCnuTypeTable	1.3.6.1.4.1.11.2.14.11.15.2.83.6.1		not-accessible	This table defines the description of cnu typ.
hpnicfEOCComCnuTypeEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1		not-accessible	The entry of the table hpnicfEOCComCnuTypeTable.
U32 hpnicfEOCComCnuTypeIdx	1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1.1	Unsigned32	not-accessible	A unique value for each cnu types. Its value ranges between 1 and the value of cny typess.
STR hpnicfEOCComCnuDescripton	1.3.6.1.4.1.11.2.14.11.15.2.83.6.1.1.2	DisplayString	read-only	The description for unique cnu types.
hpnicfEOCComCnuNumTable	1.3.6.1.4.1.11.2.14.11.15.2.83.6.2		not-accessible	This table defines the number of cnu registered in variable types of the CLT .
hpnicfEOCComCnuNumEntry	1.3.6.1.4.1.11.2.14.11.15.2.83.6.2.1		not-accessible	The entry of the table hpnicfEOCComCnuNumTable.
I32 hpnicfEOCComCnuNumber	1.3.6.1.4.1.11.2.14.11.15.2.83.6.2.1.1	Integer32	read-only	The number of special type of cnu that has been registerd in clt.

RFC description

Manages common configuration for Ethernet Passive Optical Network (EOC) and Ethernet Over Cable (EOC) ports on HP devices.

Start monitoring HP Networking access aggregation devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-EOC-COMMON-MIB