UBNT-AirFIBER-MIB

All MIBs › UBNT-AirFIBER-MIB

Organization: Ubiquiti Networks, Inc.

Last Updated: 2014-05-27

Description: Radio link configuration and status for Ubiquiti AirFiber point-to-point microwave backhaul devices, covering frequency, power, modulation, and GPS sync

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBNT-AirFIBER-MIB?

UBNT-AirFIBER-MIB is a Ubiquiti Networks, Inc. proprietary MIB configuring the AirFiber point-to-point microwave backhaul radio. Its configuration table, keyed by index, records radio enable, link mode, duplex, TX/RX frequency (with secondary frequency pairs for multi-channel links), regulatory domain, GPS-sync enable, TX power, RX gain, max TX modulation rate, modulation-rate control, Ethernet data-port link speed, link name, encryption key, Ethernet flow control, multicast filter, RF-link tracking, and link-off duration/spacing. As a configuration MIB it lets an administrator confirm frequency, power, and modulation settings on a Ubiquiti AirFiber backhaul link. It is deployed on Ubiquiti Networks AirFiber point-to-point radios. Engineers can download the UBNT-AirFIBER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBNT-AirFIBER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquiti Networks AirFiber point-to-point radios

Monitoring Examples

An administrator checks txFrequency and maxTxModRate to confirm the configured frequency and modulation rate on a Ubiquiti AirFiber backhaul link.

What Can Be Monitored

radio frequency, power, and modulation configuration

Imported Objects

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

From UBNT-MIB

ubntMIB

MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using txFramesOK OID:

Select an Ubiquiti Networks AirFiber point-to-point radio (frequency/power/modulation config status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type txFramesOK into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the eth Data Port TX Frames. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubntAirFIBER	1.3.6.1.4.1.41112.1.3			The AirFIBER MIB module for Ubiquiti Networks, Inc. entities
airFiberConfig	1.3.6.1.4.1.41112.1.3.1		not-accessible	AirFiber Configuration Group
airFiberConfigEntry	1.3.6.1.4.1.41112.1.3.1.1		not-accessible	An entry in the airFiberConfig Table
I32 airFiberConfigIndex	1.3.6.1.4.1.41112.1.3.1.1.1	Integer32	not-accessible	Index for the airFiberConfig
INT radioEnable	1.3.6.1.4.1.41112.1.3.1.1.2	INTEGER	read-only	Radio Enabled State (Enabled/Disabled)
INT radioLinkMode	1.3.6.1.4.1.41112.1.3.1.1.3	INTEGER	read-only	Radio Operating Mode
INT radioDuplex	1.3.6.1.4.1.41112.1.3.1.1.4	INTEGER	read-only	Radio Duplex Mode
I32 txFrequency	1.3.6.1.4.1.41112.1.3.1.1.5	Integer32	read-only	TX Operating frequency (MHz)
I32 rxFrequency	1.3.6.1.4.1.41112.1.3.1.1.6	Integer32	read-only	RX Operating frequency (MHz)
STR regDomain	1.3.6.1.4.1.41112.1.3.1.1.7	DisplayString	read-only	Regulatory Domain
INT gpsSync	1.3.6.1.4.1.41112.1.3.1.1.8	INTEGER	read-only	GPS Synchronization state (OFF, ON)
I32 txPower	1.3.6.1.4.1.41112.1.3.1.1.9	Integer32	read-only	Radio Transmit Power Setting (dBm)
INT rxGain	1.3.6.1.4.1.41112.1.3.1.1.10	INTEGER	read-only	Radio Receiver Gain Setting
INT maxTxModRate	1.3.6.1.4.1.41112.1.3.1.1.11	INTEGER	read-only	Maximum TX Modulation Rate
INT modRateControl	1.3.6.1.4.1.41112.1.3.1.1.12	INTEGER	read-only	Transmit Modulation Rate Control
INT ethDPortLinkSpeed	1.3.6.1.4.1.41112.1.3.1.1.13	INTEGER	read-only	Ethernet Data Port Configuration
STR linkName	1.3.6.1.4.1.41112.1.3.1.1.14	DisplayString	read-only	Radio Link Name
STR encryptKey	1.3.6.1.4.1.41112.1.3.1.1.15	DisplayString	read-only	Radio Link Encryption Key
INT ethFlowControl	1.3.6.1.4.1.41112.1.3.1.1.16	INTEGER	read-only	Ethernet DATA port Flow Control (OFF, ON)
INT ethMcastFilter	1.3.6.1.4.1.41112.1.3.1.1.17	INTEGER	read-only	Ethernet DATA port Multicast Filter. Enabling Filter prevents all multicast packets from reaching the CPU.
INT ethTrackRFLink	1.3.6.1.4.1.41112.1.3.1.1.18	INTEGER	read-only	Enable Ethernet DATA port state to track RF Link. Enabled forces DATA port to follow RF Link State. Use-Timers drops Data Port for timeout period
I32 ethLinkOffDuration	1.3.6.1.4.1.41112.1.3.1.1.19	Integer32	read-only	Duration (seconds) of Ethernet Link Drop when ethTrackRFLink is set to Use-Timers
I32 ethLinkOffSpacing	1.3.6.1.4.1.41112.1.3.1.1.20	Integer32	read-only	Spacing (seconds) of consecutive Etherenet Link Drops when ethTrackLink is set to Use-Timers
I32 txFrequency1	1.3.6.1.4.1.41112.1.3.1.1.21	Integer32	read-only	First configured TX Frequency (MHz) of radio.
I32 rxFrequency1	1.3.6.1.4.1.41112.1.3.1.1.22	Integer32	read-only	First configured RX Frequency (MHz) of radio.
I32 txFrequency2	1.3.6.1.4.1.41112.1.3.1.1.23	Integer32	read-only	Second configured TX Frequency (MHz) of radio. 5 GHz radios only.
I32 rxFrequency2	1.3.6.1.4.1.41112.1.3.1.1.24	Integer32	read-only	Second configured RX Frequency (MHz) of radio. 5 GHz radios only.
I32 txFrequency3	1.3.6.1.4.1.41112.1.3.1.1.25	Integer32	read-only	Third configured TX Frequency (MHz) of radio. 5 GHz radios only.
I32 rxFrequency3	1.3.6.1.4.1.41112.1.3.1.1.26	Integer32	read-only	Third configured RX Frequency (MHz) of radio. 5 GHz radios only.
I32 channelWidth	1.3.6.1.4.1.41112.1.3.1.1.27	Integer32	read-only	Current RF Channel Bandwidth. 5 GHz radios only.
I32 txChannelWidth	1.3.6.1.4.1.41112.1.3.1.1.28	Integer32	read-only	Current TX RF Channel Bandwidth (MHz). 5 GHz radios only.
I32 rxChannelWidth	1.3.6.1.4.1.41112.1.3.1.1.29	Integer32	read-only	Current RX RF Channel Bandwidth (MHz). 5 GHz radios only.
airFiberStatus	1.3.6.1.4.1.41112.1.3.2		not-accessible	AirFiber Status Group
airFiberStatusEntry	1.3.6.1.4.1.41112.1.3.2.1		not-accessible	An entry in the airFiberStatus Table
I32 airFiberStatusIndex	1.3.6.1.4.1.41112.1.3.2.1.1	Integer32	not-accessible	Index for the air0 interface
INT curTXModRate	1.3.6.1.4.1.41112.1.3.2.1.2	INTEGER	read-only	Current Transmit Modulation Rate
I32 radioLinkDistFt	1.3.6.1.4.1.41112.1.3.2.1.3	Integer32	read-only	Radio Link Distance (Feet)
I32 radioLinkDistM	1.3.6.1.4.1.41112.1.3.2.1.4	Integer32	read-only	Radio Link Distance (Meters)
I32 rxCapacity	1.3.6.1.4.1.41112.1.3.2.1.5	Integer32	read-only	Radio Receive Throughput Capacity (bits/sec)
I32 txCapacity	1.3.6.1.4.1.41112.1.3.2.1.6	Integer32	read-only	Radio Transmit Throughput Capacity (bits/sec)
I32 radio0TempF	1.3.6.1.4.1.41112.1.3.2.1.7	Integer32	read-only	Radio Chain 0 DAC Temperature (F)
I32 radio0TempC	1.3.6.1.4.1.41112.1.3.2.1.8	Integer32	read-only	Radio Chain 0 DAC Temperature (C)
I32 radio1TempF	1.3.6.1.4.1.41112.1.3.2.1.9	Integer32	read-only	Radio Chain 1 DAC Temperature (F)
I32 radio1TempC	1.3.6.1.4.1.41112.1.3.2.1.10	Integer32	read-only	Radio Chain 0 DAC Temperature (C)
I32 rxPower0	1.3.6.1.4.1.41112.1.3.2.1.11	Integer32	read-only	Radio Chain 0 RX Power Level (dBm)
T/F rxPower0Valid	1.3.6.1.4.1.41112.1.3.2.1.12	TruthValue	read-only	Radio Chain 0 RX Power Valid
T/F rxOverload0	1.3.6.1.4.1.41112.1.3.2.1.13	TruthValue	read-only	Radio Chain 0 RX Overloaded
I32 rxPower1	1.3.6.1.4.1.41112.1.3.2.1.14	Integer32	read-only	Radio Chain 1 RX Power Level (dBm)
T/F rxPower1Valid	1.3.6.1.4.1.41112.1.3.2.1.15	TruthValue	read-only	Radio Chain 1 RX Power Valid
T/F rxOverload1	1.3.6.1.4.1.41112.1.3.2.1.16	TruthValue	read-only	Radio Chain 1 RX Overloaded
I32 remoteTXPower	1.3.6.1.4.1.41112.1.3.2.1.17	Integer32	read-only	Remote Radio Transmit Power Level (dBm)
INT remoteTXModRate	1.3.6.1.4.1.41112.1.3.2.1.18	INTEGER	read-only	Remote Transmit Modulation Rate
I32 remoteRXPower0	1.3.6.1.4.1.41112.1.3.2.1.19	Integer32	read-only	Remote Radio Chain 0 RX Power Level (dBm)
T/F remoteRXPower0Valid	1.3.6.1.4.1.41112.1.3.2.1.20	TruthValue	read-only	Remote Radio Chain 0 RX Power Valid
T/F remoteRXPower0Overload	1.3.6.1.4.1.41112.1.3.2.1.21	TruthValue	read-only	Remote Radio Chain 0 RX Overloaded
I32 remoteRXPower1	1.3.6.1.4.1.41112.1.3.2.1.22	Integer32	read-only	Remote Radio Chain 1 RX Power Level (dBm)
T/F remoteRXPower1Valid	1.3.6.1.4.1.41112.1.3.2.1.23	TruthValue	read-only	Remote Radio Chain 1 RX Power Valid
T/F remoteRXPower1Overload	1.3.6.1.4.1.41112.1.3.2.1.24	TruthValue	read-only	Remote Radio Chain 1 RX Overloaded
I32 countryCode	1.3.6.1.4.1.41112.1.3.2.1.25	Integer32	read-only	Configured Country Code
INT radioLinkState	1.3.6.1.4.1.41112.1.3.2.1.26	INTEGER	read-only	Radio Link State
INT ethDataPortState	1.3.6.1.4.1.41112.1.3.2.1.27	INTEGER	read-only	Ethernet Data Port State
STR gpsPulse	1.3.6.1.4.1.41112.1.3.2.1.28	DisplayString	read-only	GPS Pulse Detected
STR gpsFix	1.3.6.1.4.1.41112.1.3.2.1.29	DisplayString	read-only	GPS Fix Obtained
STR gpsLat	1.3.6.1.4.1.41112.1.3.2.1.30	DisplayString	read-only	GPS Latitude
STR gpsLong	1.3.6.1.4.1.41112.1.3.2.1.31	DisplayString	read-only	GPS Longitude
STR gpsAltMeters	1.3.6.1.4.1.41112.1.3.2.1.32	DisplayString	read-only	GPS Altitude (m)
STR gpsAltFeet	1.3.6.1.4.1.41112.1.3.2.1.33	DisplayString	read-only	GPS Altitude (ft)
I32 gpsSatsVisible	1.3.6.1.4.1.41112.1.3.2.1.34	Integer32	read-only	GPS Satellites Visible
I32 gpsSatsTracked	1.3.6.1.4.1.41112.1.3.2.1.35	Integer32	read-only	GPS Satellites Tracked
OCT gpsHDOP	1.3.6.1.4.1.41112.1.3.2.1.36	OCTET STRING	read-only	GPS Horizontal Dilution of Precision
STR dfsState	1.3.6.1.4.1.41112.1.3.2.1.37	DisplayString	read-only	Radio DFS State
I32 upTime	1.3.6.1.4.1.41112.1.3.2.1.38	Integer32	read-only	Board uptime (seconds)
STR dateTime	1.3.6.1.4.1.41112.1.3.2.1.39	DisplayString	read-only	Board date and time
STR fwVersion	1.3.6.1.4.1.41112.1.3.2.1.40	DisplayString	read-only	Board Firmware Revision
STR remoteRXGain	1.3.6.1.4.1.41112.1.3.2.1.41	DisplayString	read-only	Remote radio Receiver Gain
STR radioLinkInfo	1.3.6.1.4.1.41112.1.3.2.1.42	DisplayString	read-only	Radio Link Connection Information
STR ethDataPortInfo	1.3.6.1.4.1.41112.1.3.2.1.43	DisplayString	read-only	Ethernet Data Port Link Connection Speed
I32 linkUpTime	1.3.6.1.4.1.41112.1.3.2.1.44	Integer32	read-only	Radio Link uptime (seconds)
STR remoteMAC	1.3.6.1.4.1.41112.1.3.2.1.45	DisplayString	read-only	Remote radio MAC Address
STR remoteIP	1.3.6.1.4.1.41112.1.3.2.1.46	DisplayString	read-only	Remote radio IP Address
I32 dfsDetections	1.3.6.1.4.1.41112.1.3.2.1.47	Integer32	read-only	Number of DFS Detections since boot. 5 GHz radios only.
STR dfsDomain	1.3.6.1.4.1.41112.1.3.2.1.48	DisplayString	read-only	DFS Regulatory Domain for current TX Frequency. 5 GHz radios only.
STR dfsStateTxFreq1	1.3.6.1.4.1.41112.1.3.2.1.49	DisplayString	read-only	State of first TX Frequency. 5 GHz radios only.
STR dfsStateTxFreq2	1.3.6.1.4.1.41112.1.3.2.1.50	DisplayString	read-only	State of second TX Frequency. 5 GHz radios only.
STR dfsStateTxFreq3	1.3.6.1.4.1.41112.1.3.2.1.51	DisplayString	read-only	State of third TX Frequency. 5 GHz radios only.
I32 dfsTimerTxFreq1	1.3.6.1.4.1.41112.1.3.2.1.52	Integer32	read-only	Seconds remaining before first TX Frequency can advance to next operating state. Channel availability check timeout is 60 seconds and DFS detection timeout is 30 minutes. 5 GHz radios only.
I32 dfsTimerTxFreq2	1.3.6.1.4.1.41112.1.3.2.1.53	Integer32	read-only	Seconds remaining before second TX Frequency can advance to next operating state. Channel availability check timeout is 60 seconds and DFS detection timeout is 30 minutes. 5 GHz radios only.
I32 dfsTimerTxFreq3	1.3.6.1.4.1.41112.1.3.2.1.54	Integer32	read-only	Seconds remaining before third TX Frequency can advance to next operating state. Channel availability check timeout is 60 seconds and DFS detection timeout is 30 minutes. 5 GHz radios only.
airFiberStatistics	1.3.6.1.4.1.41112.1.3.3		not-accessible	AirFiber Statistics
airFiberStatisticsEntry	1.3.6.1.4.1.41112.1.3.3.1		not-accessible	An entry in the AirFiberStatisticsTable
I32 airFiberStatisticsIndex	1.3.6.1.4.1.41112.1.3.3.1.1	Integer32	not-accessible	Index for the airFiberStatus
C64 txFramesOKEx	1.3.6.1.4.1.41112.1.3.3.1.2	Counter64	read-only	Eth Data Port TX Frames
C64 rxFramesOK	1.3.6.1.4.1.41112.1.3.3.1.3	Counter64	read-only	Eth Data Port RX Frames
C64 rxFrameCrcErr	1.3.6.1.4.1.41112.1.3.3.1.4	Counter64	read-only	Eth Data Port CRC Errors
C64 rxAlignErr	1.3.6.1.4.1.41112.1.3.3.1.5	Counter64	read-only	Eth Data Port Receive Alignment Errors
C64 txOctetsOK	1.3.6.1.4.1.41112.1.3.3.1.6	Counter64	read-only	Eth Data Port TX Octets
C64 rxOctetsOK	1.3.6.1.4.1.41112.1.3.3.1.7	Counter64	read-only	Eth Data Port RX Octets
C64 txPauseFrames	1.3.6.1.4.1.41112.1.3.3.1.8	Counter64	read-only	Eth Data Port Pause Frames Transmitted
C64 rxPauseFrames	1.3.6.1.4.1.41112.1.3.3.1.9	Counter64	read-only	Eth Data Port Pause Frames Received
C64 rxErroredFrames	1.3.6.1.4.1.41112.1.3.3.1.10	Counter64	read-only	Eth Data Port Bad Frames Received
C64 txErroredFrames	1.3.6.1.4.1.41112.1.3.3.1.11	Counter64	read-only	Eth Data Port Bad Frames Transmitted
C64 rxValidUnicastFrames	1.3.6.1.4.1.41112.1.3.3.1.12	Counter64	read-only	Eth Data Port Unicast Frames Received
C64 rxValidMulticastFrames	1.3.6.1.4.1.41112.1.3.3.1.13	Counter64	read-only	Eth Data Port Multicast Frames Received
C64 rxValidBroadcastFrames	1.3.6.1.4.1.41112.1.3.3.1.14	Counter64	read-only	Eth Data Port Broadcast Frames Received
C64 txValidUnicastFrames	1.3.6.1.4.1.41112.1.3.3.1.15	Counter64	read-only	Eth Data Port Unicast Frames Transmitted
C64 txValidMulticastFrames	1.3.6.1.4.1.41112.1.3.3.1.16	Counter64	read-only	Eth Data Port Multicast Frames Transmitted
C64 txValidBroadcastFrames	1.3.6.1.4.1.41112.1.3.3.1.17	Counter64	read-only	Eth Data Port Broadcast Frames Transmitted
C64 rxDroppedMacErrFrames	1.3.6.1.4.1.41112.1.3.3.1.18	Counter64	read-only	Eth Data Port Dropped MAC Receive Errors
C64 rxTotalOctets	1.3.6.1.4.1.41112.1.3.3.1.19	Counter64	read-only	Eth Data Port Total Octets Received
C64 rxTotalFrames	1.3.6.1.4.1.41112.1.3.3.1.20	Counter64	read-only	Eth Data Port Total Frames Received
C64 rxLess64ByteFrames	1.3.6.1.4.1.41112.1.3.3.1.21	Counter64	read-only	Eth Data Port Undersized Frames Received
C64 rxOverLengthFrames	1.3.6.1.4.1.41112.1.3.3.1.22	Counter64	read-only	Eth Data Port Over Max Length Frames Received
C64 rx64BytePackets	1.3.6.1.4.1.41112.1.3.3.1.23	Counter64	read-only	Eth Data Port 64 Byte Frames Received
C64 rx65_127BytePackets	1.3.6.1.4.1.41112.1.3.3.1.24	Counter64	read-only	Eth Data Port 65-127 Byte Frames Received
C64 rx128_255BytePackets	1.3.6.1.4.1.41112.1.3.3.1.25	Counter64	read-only	Eth Data Port 128-256 Byte Frames Received
C64 rx256_511BytePackets	1.3.6.1.4.1.41112.1.3.3.1.26	Counter64	read-only	Eth Data Port 256-511 Byte Frames Received
C64 rx512_1023BytePackets	1.3.6.1.4.1.41112.1.3.3.1.27	Counter64	read-only	Eth Data Port 512-1023 Byte Frames Received
C64 rx1024_1518BytesPackets	1.3.6.1.4.1.41112.1.3.3.1.28	Counter64	read-only	Eth Data Port 1024-1518 Byte Frames Received
C64 rx1519PlusBytePackets	1.3.6.1.4.1.41112.1.3.3.1.29	Counter64	read-only	Eth Data Port Greater Than 1518 Byte Frames Received
C64 rxTooLongFrameCrcErr	1.3.6.1.4.1.41112.1.3.3.1.30	Counter64	read-only	Eth Data Port Too Long Frame CRC Errors Received
C64 rxTooShortFrameCrcErr	1.3.6.1.4.1.41112.1.3.3.1.31	Counter64	read-only	Eth Data Port Too Short Frame CRC Errors Received
C64 txqosoct0	1.3.6.1.4.1.41112.1.3.3.1.32	Counter64	read-only	RF TX Octets QOS 0
C64 txqosoct1	1.3.6.1.4.1.41112.1.3.3.1.33	Counter64	read-only	RF TX Octets QOS 1
C64 txqosoct2	1.3.6.1.4.1.41112.1.3.3.1.34	Counter64	read-only	RF TX Octets QOS 2
C64 txqosoct3	1.3.6.1.4.1.41112.1.3.3.1.35	Counter64	read-only	RF TX Octets QOS 3
C64 txqosoct4	1.3.6.1.4.1.41112.1.3.3.1.36	Counter64	read-only	RF TX Octets QOS 4
C64 txqosoct5	1.3.6.1.4.1.41112.1.3.3.1.37	Counter64	read-only	RF TX Octets QOS 5
C64 txqosoct6	1.3.6.1.4.1.41112.1.3.3.1.38	Counter64	read-only	RF TX Octets QOS 6
C64 txqosoct7	1.3.6.1.4.1.41112.1.3.3.1.39	Counter64	read-only	RF TX Octets QOS 7
C64 txqospkt0	1.3.6.1.4.1.41112.1.3.3.1.40	Counter64	read-only	RF TX Packets QOS 0
C64 txqospkt1	1.3.6.1.4.1.41112.1.3.3.1.41	Counter64	read-only	RF TX Packets QOS 1
C64 txqospkt2	1.3.6.1.4.1.41112.1.3.3.1.42	Counter64	read-only	RF TX Packets QOS 2
C64 txqospkt3	1.3.6.1.4.1.41112.1.3.3.1.43	Counter64	read-only	RF TX Packets QOS 3
C64 txqospkt4	1.3.6.1.4.1.41112.1.3.3.1.44	Counter64	read-only	RF TX Packets QOS 4
C64 txqospkt5	1.3.6.1.4.1.41112.1.3.3.1.45	Counter64	read-only	RF TX Packets QOS 5
C64 txqospkt6	1.3.6.1.4.1.41112.1.3.3.1.46	Counter64	read-only	RF TX Packets QOS 6
C64 txqospkt7	1.3.6.1.4.1.41112.1.3.3.1.47	Counter64	read-only	RF TX Packets QOS 7
C64 rxqosoct0	1.3.6.1.4.1.41112.1.3.3.1.48	Counter64	read-only	RF RX Octets QOS 0
C64 rxqosoct1	1.3.6.1.4.1.41112.1.3.3.1.49	Counter64	read-only	RF RX Octets QOS 1
C64 rxqosoct2	1.3.6.1.4.1.41112.1.3.3.1.50	Counter64	read-only	RF RX Octets QOS 2
C64 rxqosoct3	1.3.6.1.4.1.41112.1.3.3.1.51	Counter64	read-only	RF RX Octets QOS 3
C64 rxqosoct4	1.3.6.1.4.1.41112.1.3.3.1.52	Counter64	read-only	RF RX Octets QOS 4
C64 rxqosoct5	1.3.6.1.4.1.41112.1.3.3.1.53	Counter64	read-only	RF RX Octets QOS 5
C64 rxqosoct6	1.3.6.1.4.1.41112.1.3.3.1.54	Counter64	read-only	RF RX Octets QOS 6
C64 rxqosoct7	1.3.6.1.4.1.41112.1.3.3.1.55	Counter64	read-only	RF RX Octets QOS 7
C64 rxqospkt0	1.3.6.1.4.1.41112.1.3.3.1.56	Counter64	read-only	RF RX Packets QOS 0
C64 rxqospkt1	1.3.6.1.4.1.41112.1.3.3.1.57	Counter64	read-only	RF RX Packets QOS 1
C64 rxqospkt2	1.3.6.1.4.1.41112.1.3.3.1.58	Counter64	read-only	RF RX Packets QOS 2
C64 rxqospkt3	1.3.6.1.4.1.41112.1.3.3.1.59	Counter64	read-only	RF RX Packets QOS 3
C64 rxqospkt4	1.3.6.1.4.1.41112.1.3.3.1.60	Counter64	read-only	RF RX Packets QOS 4
C64 rxqospkt5	1.3.6.1.4.1.41112.1.3.3.1.61	Counter64	read-only	RF RX Packets QOS 5
C64 rxqospkt6	1.3.6.1.4.1.41112.1.3.3.1.62	Counter64	read-only	RF RX Packets QOS 6
C64 rxqospkt7	1.3.6.1.4.1.41112.1.3.3.1.63	Counter64	read-only	RF RX Packets QOS 7
C64 txoctetsAll	1.3.6.1.4.1.41112.1.3.3.1.64	Counter64	read-only	RF Total Octets Transmitted
C64 txpktsAll	1.3.6.1.4.1.41112.1.3.3.1.65	Counter64	read-only	RF Total Packets Transmitted
C64 rxoctetsAll	1.3.6.1.4.1.41112.1.3.3.1.66	Counter64	read-only	RF Total Octets Received
C64 rxpktsAll	1.3.6.1.4.1.41112.1.3.3.1.67	Counter64	read-only	RF Total Packets Received

RFC description

Configuration and monitoring MIB for Ubiquiti AirFIBER wireless broadband access points.

Start monitoring Ubiquiti Networks AirFiber point-to-point radios (frequency/power/modulation config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBNT-AirFIBER-MIB