All MIBs › HPN-ICF-EOC-COMMON-MIB › hpnicfEOCComUniCurrentDuplex
hpnicfEOCComUniCurrentDuplex
Module: HPN-ICF-EOC-COMMON-MIB
OID (symbolic): HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCurrentDuplex
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined.
Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType.
Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy.
What is hpnicfEOCComUniCurrentDuplex?
The UNI's actual, currently operating duplex mode: full(1), half(2), or unknown(3) if it can't be determined. An admin compares this against the configured hpnicfEOCComUniDuplex value to catch a port that negotiated differently than intended.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.7 snmpwalk -v2c -c public <target> HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCurrentDuplex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.7.1 snmpget -v2c -c public <target> HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCurrentDuplex.1
Start monitoring HP Networking access aggregation devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-EOC-COMMON-MIB::hpnicfEOCComUniCurrentDuplex OID value, configure state conditions and alerts, and monitor any HP Networking access aggregation devices from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.83 | hpnicfEOCCommon | HPN-ICF-EOC-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.83.4 | hpnicfEOCComUniMan | HPN-ICF-EOC-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.83.4.1 | hpnicfEOCComUniManTable | HPN-ICF-EOC-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1 | hpnicfEOCComUniManEntry | HPN-ICF-EOC-COMMON-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.83.4.1.1.7 | hpnicfEOCComUniCurrentDuplex | HPN-ICF-EOC-COMMON-MIB |