HPICF-TR069-MIB

All MIBs › HPICF-TR069-MIB

Organization: HP Networking

Last Updated: 2014-03-03

Category: Domain: Network Management, Vendor: HP/HPE

Description: HP ICF SNMP MIB for TR-069 CWMP (CPE WAN Management Protocol) client configuration and ACS server settings on HP ProCurve devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPICF-TR069-MIB?

HPICF-TR069-MIB is an HP proprietary SNMP module for configuring the TR-069 (CPE WAN Management Protocol, CWMP) client feature on HP ProCurve devices, enabling remote management of the device by an Auto-Configuration Server (ACS). It exposes configuration objects for ACS connection parameters such as server URL, credentials, and periodic inform intervals used by the device's TR-069 client. Its role in status monitoring is confirming the software feature/connectivity status of the device's remote-management client, i.e., whether it is correctly configured and able to reach its ACS, which is a software-management-plane health check rather than a hardware sensor. It has a direct dependency on the TR-069/CWMP standard defined by the Broadband Forum, since the MIB is essentially a local configuration front-end for that protocol's client behavior. It is typically deployed in service-provider or managed-service environments where HP devices are remotely provisioned and monitored via a central ACS using TR-069. Engineers can download the HPICF-TR069-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPICF-TR069-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve device (TR-069/CWMP-managed)

Monitoring Examples

No sample objects were retrieved for this module, so specific object names cannot be confirmed, but based on its purpose it would expose objects for the ACS URL, authentication credentials, and inform-interval settings, plus likely a connection/registration status object. An administrator would check the ACS connectivity/status object to confirm the device is successfully checking in with the management server, since a device failing to report to its ACS would be invisible to the provider's centralized provisioning and monitoring system. This module is a remote-management configuration MIB rather than a hardware-health MIB.

What Can Be Monitored

ACS server configuration
TR-069 client connectivity/registration status
inform interval setting

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfTR069MIB	1.3.6.1.4.1.11.2.14.11.5.1.98			This MIB defines HP proprietary objects used to configure the TR-069 feature.
hpicfTR069Notifications	1.3.6.1.4.1.11.2.14.11.5.1.98.0
hpicfTR069Objects	1.3.6.1.4.1.11.2.14.11.5.1.98.1
INT hpicfTR069EnableCWMP	1.3.6.1.4.1.11.2.14.11.5.1.98.1.1	INTEGER	read-write	Enable TR-069 on the device.
INT hpicfTR069CWMPDeviceType	1.3.6.1.4.1.11.2.14.11.5.1.98.1.2	INTEGER	read-write	The working mode of the device. By default, the device operates in gateway mode. CWMP should be disabled before changing modes.
OCT hpicfTR069AcsUrl	1.3.6.1.4.1.11.2.14.11.5.1.98.1.3	OCTET STRING	read-write	The URL used by TR-069 to connect to the ACS. The value should be a valid HTTP or HTTPS URL.
INT hpicfTR069AcsUrlOrigin	1.3.6.1.4.1.11.2.14.11.5.1.98.1.4	INTEGER	read-only	The source of the ACS URL. none - no ACS URL set config - from the device configuration file dhcp - from a DHCP server response acs - from the ACS itself
OCT hpicfTR069AcsProxyUrl	1.3.6.1.4.1.11.2.14.11.5.1.98.1.5	OCTET STRING	read-write	The URL used by TR-069 to connect to a proxy server in order to reach the ACS. The value should be a valid HTTP or HTTPS URL.
OCT hpicfTR069AcsUsername	1.3.6.1.4.1.11.2.14.11.5.1.98.1.6	OCTET STRING	read-write	The username for HTTP authentication with the ACS.
OCT hpicfTR069AcsPassword	1.3.6.1.4.1.11.2.14.11.5.1.98.1.7	OCTET STRING	read-write	The plaintext password for HTTP authentication with the ACS. This object always returns an empty string when read.
OCT hpicfTR069AcsPasswordEncrypted	1.3.6.1.4.1.11.2.14.11.5.1.98.1.8	OCTET STRING	read-write	An encrypted form of the ACS password. The value should be an encrypted password previously read from a compatible HP Networking device. This object can only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than 'none' and cannot be set at the same time as hpicfTR069AcsPassword.
U32 hpicfTR069AcsConnectRetryInterval	1.3.6.1.4.1.11.2.14.11.5.1.98.1.9	Unsigned32	read-only	The ACS connection retry interval.
OCT hpicfTR069CpeUsername	1.3.6.1.4.1.11.2.14.11.5.1.98.1.10	OCTET STRING	read-write	The username for HTTP authentication with the TR-069 client.
OCT hpicfTR069CpePassword	1.3.6.1.4.1.11.2.14.11.5.1.98.1.11	OCTET STRING	read-write	The plaintext password for HTTP authentication with the TR-069 client. This object always returns an empty string when read.
OCT hpicfTR069CpePasswordEncrypted	1.3.6.1.4.1.11.2.14.11.5.1.98.1.12	OCTET STRING	read-write	An encrypted form of the client password. The value should be an encrypted password previously read from a compatible HP Networking device. This object can only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than 'none' and cannot be set at the same time as hpicfTR069CpePassword.
U32 hpicfTR069CpeWaitTimeout	1.3.6.1.4.1.11.2.14.11.5.1.98.1.13	Unsigned32	read-only	The close-wait timeout of the ACS connection.
INT hpicfTR069PeriodicInformEnable	1.3.6.1.4.1.11.2.14.11.5.1.98.1.14	INTEGER	read-only	The periodic inform message setting specified by the ACS.
U32 hpicfTR069PeriodicInformInterval	1.3.6.1.4.1.11.2.14.11.5.1.98.1.15	Unsigned32	read-only	The periodic inform interval in seconds specified by the ACS.
DAT hpicfTR069PeriodicInformTime	1.3.6.1.4.1.11.2.14.11.5.1.98.1.16	DateAndTime	read-only	The date and time to send inform messages specified by the ACS.
hpicfTR069Conformance	1.3.6.1.4.1.11.2.14.11.5.1.98.2
hpicfTR069MIBCompliances	1.3.6.1.4.1.11.2.14.11.5.1.98.2.1
hpicfTR069MIBCompliance	1.3.6.1.4.1.11.2.14.11.5.1.98.2.1.1			The compliance statement for HP switches implementing the HPICF-TR069 MIB.
hpicfTR069MIBGroups	1.3.6.1.4.1.11.2.14.11.5.1.98.2.2
hpicfTR069Group	1.3.6.1.4.1.11.2.14.11.5.1.98.2.2.1			A collection of objects to support the TR-069 feature.

RFC description

Configures TR-069 (CPE WAN Management Protocol) features on HP ICF switches for remote device management.

Start monitoring HP ProCurve device (TR-069/CWMP remote management client) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPICF-TR069-MIB

What Is HPICF-TR069-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description