HPN-ICF-COMMON-SYSTEM-MIB

All MIBs › HPN-ICF-COMMON-SYSTEM-MIB

Last Updated: 2012-06-06

Category: Device Management, Domain: Network Management, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: HP Networking ICF SNMP MIB providing common system-level management objects including device identity and operational state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-COMMON-SYSTEM-MIB?

HPN-ICF-COMMON-SYSTEM-MIB is an HP Networking (ICF product family) MIB defining system-level objects common to both HP routers and switches. Per its module description it exposes common system data -- general device identity and operational state information shared across product types rather than product-specific counters. Its monitoring role centers on basic hardware/software status awareness: confirming a device's operational state and identity as a baseline health check applicable across the HP Networking ICF product family, though the source data here contains no concrete object names to detail further. As a "common system" MIB shared across router and switch platforms, it likely underpins or is referenced by other HP Networking ICF product-specific MIBs, though no explicit standard-MIB dependency is confirmed in the available text. It is deployed across HP Networking ICF-based routers and switches as a shared, foundational system-status MIB. Network engineers evaluating or troubleshooting this functionality can download the HPN-ICF-COMMON-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-COMMON-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking ICF-based router
HP Networking ICF-based switch

Monitoring Examples

No sample object names were provided for this MIB, so a concrete polling scenario cannot be described without inventing table/object names. Based on the module description, an operator would be expected to check basic device identity and operational-state objects common to the platform, but the exact objects available cannot be confirmed from the given data.

Imported Objects

From HPN-ICF-OID-MIB

hpnicf

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfSystem	1.3.6.1.4.1.11.2.14.11.15.6			This file describes common MIB objects implemented by both Routers and Switches.
INT hpnicfWriteConfig	1.3.6.1.4.1.11.2.14.11.15.6.5	INTEGER	read-write	Write config to router.
INT hpnicfStartFtpServer	1.3.6.1.4.1.11.2.14.11.15.6.6	INTEGER	read-write	Decide whether start ftp-server.enable(1) indicates to start ftp-server; disable(2) indicates to stop ftp-server.
INT hpnicfReboot	1.3.6.1.4.1.11.2.14.11.15.6.7	INTEGER	read-write	normal:do nothing. reboot :reboot the router. 'normal' will be returned when getting.
hpnicfSystemNotification	1.3.6.1.4.1.11.2.14.11.15.6.8
NTF hpnicfWriteSuccessTrap	1.3.6.1.4.1.11.2.14.11.15.6.8.1			Send a trap about write success.
NTF hpnicfWriteFailureTrap	1.3.6.1.4.1.11.2.14.11.15.6.8.2			Send a trap about write failure.
NTF hpnicfRebootSendTrap	1.3.6.1.4.1.11.2.14.11.15.6.8.3			If a user restarts the device with command 'reboot', this trap will be sent two seconds before the device reboots.
NTF hpnicfSysColdStartTrap	1.3.6.1.4.1.11.2.14.11.15.6.8.4			System cold start trap.
NTF hpnicfSysWarmStartTrap	1.3.6.1.4.1.11.2.14.11.15.6.8.5			System warm start trap.
NTF hpnicfSysLoghostUnreachableTrap	1.3.6.1.4.1.11.2.14.11.15.6.8.6			This notification will be sent when a loghost becomes unreachable.
STR hpnicfSoftwareVersion	1.3.6.1.4.1.11.2.14.11.15.6.9	DisplayString	read-only	Software version.
INT hpnicfSysBootType	1.3.6.1.4.1.11.2.14.11.15.6.10	INTEGER	read-only	Boot type of the system, indicates whether the last device reboot was by CLI (warm start) or power off (cold start).
hpnicfSystemInfo	1.3.6.1.4.1.11.2.14.11.15.6.11
I32 hpnicfSysStatisticPeriod	1.3.6.1.4.1.11.2.14.11.15.6.11.1	Integer32	read-write	Statistic period. The device collects statistics within the period.
I32 hpnicfSysSamplePeriod	1.3.6.1.4.1.11.2.14.11.15.6.11.2	Integer32	read-write	Sampling period. The device takes samples periodically for statistics collection.
I32 hpnicfSysTrapResendPeriod	1.3.6.1.4.1.11.2.14.11.15.6.11.3	Integer32	read-write	Trap resending period. If the value is zero, the trap will not be re-sent.
I32 hpnicfSysTrapCollectionPeriod	1.3.6.1.4.1.11.2.14.11.15.6.11.4	Integer32	read-write	Trap collecting period. If the value is zero, the trap will not be re-sent.
I32 hpnicfSysSnmpPort	1.3.6.1.4.1.11.2.14.11.15.6.11.5	Integer32	read-only	UDP port for SNMP protocol entity to receive messages except Trap-PDU.
I32 hpnicfSysSnmpTrapPort	1.3.6.1.4.1.11.2.14.11.15.6.11.6	Integer32	read-only	UDP port for Trap-PDU to receive messages.
OCT hpnicfSysNetID	1.3.6.1.4.1.11.2.14.11.15.6.11.7	OCTET STRING	read-write	System Net ID.
DAT hpnicfSysLastSampleTime	1.3.6.1.4.1.11.2.14.11.15.6.11.8	DateAndTime	read-only	Last sampling time of the system.
I32 hpnicfSysTrapSendNum	1.3.6.1.4.1.11.2.14.11.15.6.11.9	Integer32	read-write	Maximum number of times for sending a trap. If the value is zero, a trap will be sent at an interval continually.
TIK hpnicfSysFirstTrapTime	1.3.6.1.4.1.11.2.14.11.15.6.11.10	TimeTicks	accessible-for-notify	Time when the first trap is sent.
OCT hpnicfSysBannerMOTD	1.3.6.1.4.1.11.2.14.11.15.6.11.11	OCTET STRING	read-write	An administratively configured message that is displayed to the user when the user logs in to the device through the console port or Web interface.
hpnicfSystemNotificationInfo	1.3.6.1.4.1.11.2.14.11.15.6.12
I32 hpnicfSysLoghostIndex	1.3.6.1.4.1.11.2.14.11.15.6.12.1	Integer32	accessible-for-notify	Index of loghost.
IPt hpnicfSysLoghostIpaddressType	1.3.6.1.4.1.11.2.14.11.15.6.12.2	InetAddressType	accessible-for-notify	IP address type of the loghost.
IP hpnicfSysLoghostIpaddress	1.3.6.1.4.1.11.2.14.11.15.6.12.3	InetAddress	accessible-for-notify	IP address of the loghost.
STR hpnicfSysLoghostTrapVpnName	1.3.6.1.4.1.11.2.14.11.15.6.12.4	DisplayString	accessible-for-notify	VPN name of the loghost.

RFC description

Hewlett-Packard common system management objects for routers and switches.

Start monitoring HP Networking ICF-based router or switch (shared system identity) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-COMMON-SYSTEM-MIB

What Is HPN-ICF-COMMON-SYSTEM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description