All MIBs › BLADETYPE2-SWITCH-MIB
Organization: Hewlett Packard Company
Last Updated: 2003-12-05
Category: VLAN and Bridging, Vendor: HP/HPE
Description: Manages switching fabric configuration and forwarding tables on HP BladeSystem Type 2 blade switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BLADETYPE2-SWITCH-MIB?
BLADETYPE2-SWITCH-MIB is a vendor-specific MIB for the embedded Ethernet switch module used in HP BladeSystem Type 2 c-Class blade enclosures, in the data-center blade-server networking technology area. It exposes both switching-fabric configuration (per-port operational state, forwarding, RMON hooks, and 802.1x authentication) and hardware inventory/health objects such as part number, hardware revision, power supply status, and an onboard temperature sensor. It plays a clear role in hardware status monitoring through hwPowerSupplyStatus and hwSensor1Temp, letting an operator detect a failing power supply or overheating switch blade, in addition to tracking per-port link/operational state. It implicitly relies on general RMON conventions (via portOperRmon) and standard 802.1x concepts for port-level authentication state. It is typically deployed as the internal switch/interconnect blade within an HP BladeSystem c-Class enclosure. Engineers can download the BLADETYPE2-SWITCH-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BLADETYPE2-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HP BladeSystem c-Class Type 2 blade switch/interconnect module
Monitoring Examples
An administrator would poll hwPowerSupplyStatus and hwSensor1Temp to catch an early power-supply failure or thermal excursion inside the enclosure, and walk agPortOperTable (via agPortOperTableEntry/portOperIdx) to check portOperState for each internal blade-facing port. A port stuck down in portOperState combined with an abnormal hwSensor1Temp reading would point to a blade or switch-module hardware problem rather than a simple link issue.
What Can Be Monitored
- power supply status
- onboard temperature sensor reading
- per-port operational/link state
- hardware part number and revision
- 802.1x port authentication state
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| BridgeId |
From HP-SWITCH-PL-MIB
| hpSwitchBladeType2-Mgmt |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| PhysAddress |
How to Use in IPNetwork Monitor
Example using pktStatsAllocs OID:
Select an HP BladeSystem Type 2 embedded network switch module as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type pktStatsAllocs into the Find box to locate it in the OID tree, then select it and click OK. It reports the total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| agent | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1 | The MIB module for the general switch configuration and information . | ||
| agentConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1 | |||
| agSystem | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1 | |||
| INT agApplyConfiguration | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.2 | INTEGER | read-write | This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read. |
| INT agSavePending | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.3 | INTEGER | read-only | This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash. |
| INT agSaveConfiguration | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.4 | INTEGER | read-write | This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read. |
| INT agRevert | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.5 | INTEGER | read-write | This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read. |
| INT agRevertApply | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.6 | INTEGER | read-write | This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read. |
| INT agReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.7 | INTEGER | read-write | This is an action object to reboot the switch. other(1) is returned always when read. The following values are writable: coldReset(2)... warmReset(3)... |
| INT agConfigForNxtReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.8 | INTEGER | read-write | The configuration information to be loaded from at next reset. The following values are writable: active(2)...active configuration block backup(3)...backup configuration block default(4)..default configuration block |
| INT agImageForNxtReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.9 | INTEGER | read-write | The software image to be booted from at next reset. The following values are writable: image1(2)...image 1 image2(3)...image 2 |
| STR agSoftwareVersion | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.10 | DisplayString | read-only | The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available. |
| STR agBootVer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.11 | DisplayString | read-only | The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. |
| STR agImage1Ver | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.12 | DisplayString | read-only | The version of the software image stored in image 1 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. |
| STR agImage2Ver | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.13 | DisplayString | read-only | The version of the software image stored in image 2 storage in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available or there is no valid software image. |
| STR agRtcDate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.14 | DisplayString | read-write | The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. |
| STR agRtcTime | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.15 | DisplayString | read-write | The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. |
| STR agLastSetErrorReason | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.16 | DisplayString | read-only | The error reason of the last SET failure. |
| INT agCurCfgHttpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.17 | INTEGER | read-only | The TCP port number that the HTTP server is listening to in the current_configuration block. |
| INT agNewCfgHttpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.18 | INTEGER | read-write | The TCP port number that the HTTP server is listening to in the new_configuration block. |
| STR agCurCfgLoginBanner | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.19 | DisplayString | read-only | The user defined login banner. |
| STR agNewCfgLoginBanner | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.20 | DisplayString | read-write | The user defined login banner. |
| INT agCurCfgConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.23 | INTEGER | read-only | Enable or disable console output of syslog messages. |
| INT agNewCfgConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.24 | INTEGER | read-write | Enable or disable console output of syslog messages. |
| INT agCurCfgBootp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.29 | INTEGER | read-only | Enable or disable the use of BootP, as currently configured in the current_configuration block. |
| INT agNewCfgBootp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.30 | INTEGER | read-write | Enable or disable the use of BootP, in the new_configuration block. |
| INT agSlotNumber | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.31 | INTEGER | read-only | Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning. |
| INT agCurCfgSnmpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.32 | INTEGER | read-only | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. |
| INT agNewCfgSnmpTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.33 | INTEGER | read-write | Once SNMP operations like agApplyConfig, agDiffState and agDumpState, which use the state machine are done the resources used by these operations need to be freed by setting the state back to 'idle' so others can issue the commands via SNMP. agSnmpTimeout indicates the number of minutes before the resources are freed and the state set back to 'idle' if this operation is not performed by the user. |
| INT agCurCfgTelnetServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.34 | INTEGER | read-only | The TCP port number that the telnet server listens for telnet sessions. |
| INT agNewCfgTelnetServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.35 | INTEGER | read-write | The TCP port number that the telnet server listens for telnet sessions. |
| INT agClearFlashDump | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.36 | INTEGER | read-write | This is an action object to clear the FLASH dump. ok(1) is returned when this object is read. |
| STR agRackId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.37 | DisplayString | read-only | The rack unique identifier. |
| STR agChassis | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.38 | DisplayString | read-only | Chassis serial number. |
| INT agCurCfgTftpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.39 | INTEGER | read-only | The TCP port number that the TFTP server is listening to in the current_configuration block. |
| INT agNewCfgTftpServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.40 | INTEGER | read-write | The TCP port number that the TFTP server is listening to in the new_configuration block. |
| INT agCurCfgHttpsServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.49 | INTEGER | read-only | The TCP port number that the HTTPS server is listening to in the current_configuration block. |
| INT agNewCfgHttpsServerPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.50 | INTEGER | read-write | The TCP port number that the HTTPS server is listening to in the new_configuration block. |
| INT agCurDaylightSavings | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.51 | INTEGER | read-only | The daylight savings location. |
| INT agNewDaylightSavings | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.52 | INTEGER | read-write | The daylight savings location. |
| I32 agCurCfgIdleCLITimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.53 | Integer32 | read-only | Set idle CLI sessions timeout. |
| I32 agNewCfgIdleCLITimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.54 | Integer32 | read-write | Set idle CLI sessions timeout. |
| INT agCurCfgUfdTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.55 | INTEGER | read-only | The current status of the UFDFO SNMP trap. |
| INT agNewCfgUfdTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.56 | INTEGER | read-write | Enable or disable sending UFDFO SNMP trap. |
| INT agCurBootNxtCliMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.64 | INTEGER | read-only | Current boot mode. |
| INT agNewBootNxtCliMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.65 | INTEGER | read-write | Next cli boot mode. |
| INT agCurCfgReminders | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.70 | INTEGER | read-only | Current status of reminders feature. |
| INT agNewCfgReminders | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.1.71 | INTEGER | read-write | Enable or disable reminders feature. |
| agPortConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2 | |||
| I32 agPortTableMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.1 | Integer32 | read-only | The maximum number of rows in the port configuration host table. |
| agPortCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2 | not-accessible | The table of port configuration in the current_configuration block. | |
| agPortCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1 | not-accessible | A row in the port table in the current_configuration block. | |
| I32 agPortCurCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.1 | Integer32 | read-only | The index of the row in port configurations table. |
| INT agPortCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.2 | INTEGER | read-only | This is the state of the port. |
| INT agPortCurCfgVlanTag | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.3 | INTEGER | read-only | This is VLAN tag state of the port |
| INT agPortCurCfgStp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.4 | INTEGER | read-only | This object is used to turn Spanning Tree on or off for the port. |
| INT agPortCurCfgRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.5 | INTEGER | read-only | This object is used to turn RMON on or off on the port. |
| INT agPortCurCfgPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.6 | INTEGER | read-only | The default VLAN ID for the port. |
| INT agPortCurCfgGigEthAutoNeg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.11 | INTEGER | read-only | This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. |
| INT agPortCurCfgGigEthSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.12 | INTEGER | read-only | Selects the port speed for gigabit Ethernet connection. |
| INT agPortCurCfgGigEthMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.13 | INTEGER | read-only | This object is used to select port mode for gigabit Ethernet connection. |
| INT agPortCurCfgGigEthFctl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.14 | INTEGER | read-only | This object is used to select port flow control for gigabit Ethernet connection. |
| STR agPortCurCfgPortName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.15 | DisplayString | read-only | The switch port name. |
| INT agPortCurCfgLinkTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.18 | INTEGER | read-only | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. |
| INT agPortCurCfgTagPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.19 | INTEGER | read-only | This is PVID tag state of the port |
| INT agPortCurCfgMulticastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.20 | INTEGER | read-only | Current status of the port's Multicast Threshold. |
| INT agPortCurCfgMulticastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.21 | INTEGER | read-only | Current port's Multicast Threshold Rate. |
| INT agPortCurCfgBroadcastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.22 | INTEGER | read-only | Current status of the port's Broadcast Threshold. |
| INT agPortCurCfgBroadcastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.23 | INTEGER | read-only | Current port's Broadcast Threshold Rate. |
| INT agPortCurCfgDLFThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.24 | INTEGER | read-only | Current status of the port's Destination Lookup Fail Threshold. |
| INT agPortCurCfgDLFThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.1.25 | INTEGER | read-only | Current port's Destination Lookup Fail Threshold Rate. |
| agPortFiberCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2 | not-accessible | The table of fiber port configuration in the current_configuration block. | |
| agPortFiberCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1 | not-accessible | A row in the fiber port table in the current_configuration block. | |
| I32 agPortFiberCurCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.1 | Integer32 | read-only | The index of the row in fiber port current configuration table. |
| INT agPortFiberCurCfgTxCtrl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.2 | INTEGER | read-only | This is the state of the TX control. |
| INT agPortFiberCurCfgTxPulse | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.3 | INTEGER | read-only | This is the state of the TX pulse. |
| INT agPortFiberCurCfgTxUp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.4 | INTEGER | read-only | Current TX up time. |
| INT agPortFiberCurCfgTxDn | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.2.2.1.5 | INTEGER | read-only | Current TX dn time. |
| agPortNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3 | not-accessible | The table of port configuration in the new_configuration block. | |
| agPortNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1 | not-accessible | A row in the port configuration table in the new_configuration block. | |
| I32 agPortNewCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.1 | Integer32 | read-only | The index of the row in port configurations table. |
| INT agPortNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.2 | INTEGER | read-write | This is the state of the port. |
| INT agPortNewCfgVlanTag | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.3 | INTEGER | read-write | This is VLAN tag state of the port |
| INT agPortNewCfgStp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.4 | INTEGER | read-write | This object is used to turn Spanning Tree on or off for the port. |
| INT agPortNewCfgRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.5 | INTEGER | read-write | This object is used to turn RMON on or off on the port. |
| INT agPortNewCfgPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.6 | INTEGER | read-write | The default VLAN ID for the port. |
| INT agPortNewCfgGigEthAutoNeg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.11 | INTEGER | read-write | This object is used to turn the autonegotiation on or off for gigabit Ethernet connection. |
| INT agPortNewCfgGigEthSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.12 | INTEGER | read-write | Selects the port speed for gigabit Ethernet connection. |
| INT agPortNewCfgGigEthMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.13 | INTEGER | read-write | This object is used to select port mode for gigabit Ethernet connection. |
| INT agPortNewCfgGigEthFctl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.14 | INTEGER | read-write | This object is used to select port flow control for gigabit Ethernet connection. |
| STR agPortNewCfgPortName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.15 | DisplayString | read-write | The switch port name. |
| INT agPortNewCfgLinkTrap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.18 | INTEGER | read-write | Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise. |
| INT agPortNewCfgTagPVID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.19 | INTEGER | read-write | This is PVID tag state of the port |
| INT agPortNewCfgMulticastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.20 | INTEGER | read-write | New status of the port's Multicast Threshold. |
| INT agPortNewCfgMulticastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.21 | INTEGER | read-write | New port's Multicast Threshold Rate. |
| INT agPortNewCfgBroadcastThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.22 | INTEGER | read-write | New status of the port's Broadcast Threshold. |
| INT agPortNewCfgBroadcastThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.23 | INTEGER | read-write | New port's Broadcast Threshold Rate. |
| INT agPortNewCfgDLFThreshold | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.24 | INTEGER | read-write | New status of the port's Destination Lookup Fail Threshold. |
| INT agPortNewCfgDLFThresholdRate | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.1.25 | INTEGER | read-write | New port's Destination Lookup Fail Threshold Rate. |
| agPortFiberNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2 | not-accessible | The table of fiber port configuration in the new_configuration block. | |
| agPortFiberNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1 | not-accessible | A row in the fiber port table in the new_configuration block. | |
| I32 agPortFiberNewCfgIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.1 | Integer32 | read-only | The index of the row in fiber port new configuration table. |
| INT agPortFiberNewCfgTxCtrl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.2 | INTEGER | read-write | New TX control. |
| INT agPortFiberNewCfgTxPulse | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.3 | INTEGER | read-write | New TX pulse. |
| INT agPortFiberNewCfgTxUp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.4 | INTEGER | read-write | New TX up time. |
| INT agPortFiberNewCfgTxDn | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.2.3.2.1.5 | INTEGER | read-write | New TX dn time. |
| agRadiusConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3 | |||
| IP radCurCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.1 | IpAddress | read-only | The IP address of the Primary RADIUS server. |
| IP radNewCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.2 | IpAddress | read-write | The IP address of the Primary RADIUS server. |
| IP radCurCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.3 | IpAddress | read-only | The IP address of the Secondary RADIUS server. |
| IP radNewCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.4 | IpAddress | read-write | The IP address of the Secondary RADIUS server. |
| INT radCurCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.5 | INTEGER | read-only | Specify the RADIUS port number. |
| INT radNewCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.6 | INTEGER | read-write | Speicfy the RADIUS port number. |
| INT radCurCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.7 | INTEGER | read-only | The maximum number of seconds before resending authentication to RADIUS server. |
| INT radNewCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.8 | INTEGER | read-write | The maximum number of seconds before resending authentication to RADIUS server. |
| INT radCurCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.9 | INTEGER | read-only | Number of retries to the RADIUS server. |
| INT radNewCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.10 | INTEGER | read-write | Number of retries to the RADIUS server. |
| INT radCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.11 | INTEGER | read-only | Enable or disbale RADIUS authentication. |
| INT radNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.12 | INTEGER | read-write | Enable or disable RADIUS authentication. |
| STR radCurCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.13 | DisplayString | read-only | The RADIUS authentication string. |
| STR radNewCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.14 | DisplayString | read-write | The RADIUS authentication string. |
| INT radCurCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.15 | INTEGER | read-only | Enable or disbale RADIUS backdoor for telnet. |
| INT radNewCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.16 | INTEGER | read-write | Enable or disable RADIUS backdoor for telnet. |
| STR radCurCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.17 | DisplayString | read-only | The second RADIUS authentication string. |
| STR radNewCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.18 | DisplayString | read-write | The second RADIUS authentication string. |
| INT radCurCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.19 | INTEGER | read-only | Enable or disbale RADIUS secure backdoor for telnet. |
| INT radNewCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.3.20 | INTEGER | read-write | Enable or disable RADIUS secure backdoor for telnet. |
| agNTP | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4 | |||
| IP agCurCfgNTPServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.1 | IpAddress | read-only | The NTP Server Address. |
| IP agNewCfgNTPServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.2 | IpAddress | read-write | The NTP Server Address. |
| INT agCurCfgNTPResyncInterval | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.3 | INTEGER | read-only | The NTP Server resync interval in minutes. |
| INT agNewCfgNTPResyncInterval | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.4 | INTEGER | read-write | The NTP Server resync interval in minutes. |
| STR agCurCfgNTPTzoneHHMM | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.5 | DisplayString | read-only | The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. |
| STR agNewCfgNTPTzoneHHMM | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.6 | DisplayString | read-write | The NTP Server timezone offset from GMT formatted as (+/-)HH:MM. The valid range is from -12:59 to +12:59. |
| INT agCurCfgNTPDlight | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.7 | INTEGER | read-only | Enable/disable daylight savings time. |
| INT agNewCfgNTPDlight | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.8 | INTEGER | read-write | Enable/disable daylight savings time. |
| INT agCurCfgNTPService | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.9 | INTEGER | read-only | Enable/disable NTP Service. |
| INT agNewCfgNTPService | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.10 | INTEGER | read-write | Enable/disable NTP Service. |
| IP agCurCfgNTPSecServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.11 | IpAddress | read-only | The Secondary NTP Server Address. |
| IP agNewCfgNTPSecServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.4.12 | IpAddress | read-write | The Secondary NTP Server Address. |
| agSyslog | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5 | |||
| IP agCurCfgSyslogHost | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.1 | IpAddress | read-only | The syslog host IP address, as currently configured in the current_configuration block. |
| IP agNewCfgSyslogHost | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.2 | IpAddress | read-write | The syslog host IP address, in the new_configuration block. |
| IP agCurCfgSyslog2Host | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.3 | IpAddress | read-only | The second syslog host IP address, as currently configured in the current_configuration block. |
| IP agNewCfgSyslog2Host | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.4 | IpAddress | read-write | The second syslog host IP address, in the new_configuration block. |
| INT agCurCfgSyslogFac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.5 | INTEGER | read-only | The facility of syslog host in the current_configuration block. |
| INT agNewCfgSyslogFac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.6 | INTEGER | read-write | The facility of syslog host in the new_configuration block. |
| INT agCurCfgSyslog2Fac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.7 | INTEGER | read-only | The facility of syslog2 host in the current_configuration block. |
| INT agNewCfgSyslog2Fac | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.8 | INTEGER | read-write | The facility of syslogs host in the new_configuration block. |
| INT agClrSyslogMsgs | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.9 | INTEGER | read-write | Clears all current Syslog messages. |
| I32 agSyslogMsgTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.10 | Integer32 | read-only | The maximum number of rows in the syslog message table. |
| agSyslogMsgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11 | not-accessible | The table of syslog messages. | |
| agSyslogMsgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1 | not-accessible | A syslog message stored on the switch. | |
| I32 agSyslogMsgIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.1 | Integer32 | read-only | The syslog message table index. |
| STR agSyslogMessage | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.11.1.2 | DisplayString | read-only | The syslog message. |
| agLog | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12 | |||
| INT agNewCfgSyslogTrapConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.1 | INTEGER | read-write | Enable or disable console syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapConsole | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.2 | INTEGER | read-only | Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapSystem | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.3 | INTEGER | read-write | Enable or disable system level syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapSystem | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.4 | INTEGER | read-only | Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapMgmt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.5 | INTEGER | read-write | Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapMgmt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.6 | INTEGER | read-only | Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapCli | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.7 | INTEGER | read-write | Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapCli | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.8 | INTEGER | read-only | Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapStg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.9 | INTEGER | read-write | Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapStg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.10 | INTEGER | read-only | Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapVlan | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.11 | INTEGER | read-write | Enable or disable VLAN syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapVlan | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.12 | INTEGER | read-only | Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapSsh | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.19 | INTEGER | read-write | Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapSsh | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.20 | INTEGER | read-only | Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapVrrp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.21 | INTEGER | read-write | Enable or disable VRRP syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapVrrp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.22 | INTEGER | read-only | Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapNtp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.25 | INTEGER | read-write | Enable or disable NTP syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapNtp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.26 | INTEGER | read-only | Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapIp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.31 | INTEGER | read-write | Enable or disable IP related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapIp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.32 | INTEGER | read-only | Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapWeb | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.35 | INTEGER | read-write | Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapWeb | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.36 | INTEGER | read-only | Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapOspf | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.41 | INTEGER | read-write | Enable or disable OSPF related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapOspf | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.42 | INTEGER | read-only | Enable or disable OSPF related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.45 | INTEGER | read-write | Enable or disable rmon related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.46 | INTEGER | read-only | Enable or disable rmon related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapUfd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.47 | INTEGER | read-write | Enable or disable UFD related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapUfd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.48 | INTEGER | read-only | Enable or disable UFD related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapCfg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.49 | INTEGER | read-write | Enable or disable CFG related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapCfg | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.50 | INTEGER | read-only | Enable or disable CFG related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrap8021x | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.51 | INTEGER | read-write | Enable or disable 802.1X protocol related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrap8021x | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.52 | INTEGER | read-only | Enable or disable 802.1X protocol related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agNewCfgSyslogTrapHotlinks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.53 | INTEGER | read-write | Enable or disable Hot Links related syslog and SNMP trap, in the new_configuration block. |
| INT agCurCfgSyslogTrapHotlinks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.12.54 | INTEGER | read-only | Enable or disable Hot Links related syslog and SNMP trap, as currently configured in the current_configuration block. |
| INT agCurCfgSyslogSev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.13 | INTEGER | read-only | The severity of syslog host in the current configuration block. |
| INT agNewCfgSyslogSev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.14 | INTEGER | read-write | The severity of syslog host in the new configuration block. |
| INT agCurCfgSyslog2Sev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.15 | INTEGER | read-only | The severity of syslog2 host in the current configuration block. |
| INT agNewCfgSyslog2Sev | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.5.16 | INTEGER | read-write | The severity of syslogs host in the new configuration block. |
| agTrapHost | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6 | |||
| I32 agTrapHostTableMaxEnt | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.1 | Integer32 | read-only | The maximum number of rows in the trap host table. |
| agCurCfgTrapHostTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2 | not-accessible | The table of trap hosts which to send SNMP traps in the current_configuration block. | |
| agCurCfgTrapHostEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1 | not-accessible | A row in the trap host table in the current_configuration block. | |
| I32 agCurCfgTrapHostIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.1 | Integer32 | read-only | The index of the row in trap host table. |
| IP agCurCfgTrapHostIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.2 | IpAddress | read-only | The IP address of a trap host. |
| STR agCurCfgTrapHostCommString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.2.1.3 | DisplayString | read-only | The SNMP community string to use with the trap host |
| agNewCfgTrapHostTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3 | not-accessible | The table of trap hosts which to send SNMP traps in the new_configuration block. | |
| agNewCfgTrapHostEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1 | not-accessible | A row in the trap host table in the new_configuration block. | |
| I32 agNewCfgTrapHostIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.1 | Integer32 | read-only | The index of the row in trap host table. |
| IP agNewCfgTrapHostIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.2 | IpAddress | read-write | The IP address of a trap host. |
| STR agNewCfgTrapHostCommString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.6.3.1.3 | DisplayString | read-write | The SNMP community string to use with the trap host |
| agTftp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7 | |||
| STR agTftpServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.1 | DisplayString | read-write | The TFTP server IP address or domain name. |
| INT agTftpImage | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.2 | INTEGER | read-write | Whether the image file should be loaded in image1 or image2 or boot in flash. |
| STR agTftpImageFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.3 | DisplayString | read-write | The image file name to be downloaded. |
| STR agTftpCfgFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.4 | DisplayString | read-write | The configuration file name. |
| STR agTftpDumpFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.5 | DisplayString | read-write | The file name for core dump. |
| INT agTftpAction | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.6 | INTEGER | read-write | This is an action object to perform various TFTP Get or Put functions. The TFTP sever is specified in agTftpServer object. img-get(2) - Download switch image from a specified image file (agTftpImageFileName) on the TFTP server to the destinated storage (agTftpImage). cfg-get(3) - Download switch configuration from a specified file (agTftpCfgFileName) on the TFTP server. cfg-put(4) - Upload switch configuration to a specified file (agTftpCfgFileName) on the TFTP server. dump-put(5)- Download switch core dump to a specified file (agTftpDumpFileName) on the TFTP server. img-put(7) - Upload specified switch image to a specified image file (agTftpImageFileName) on the TFTP server. tsdump-put(5)- Download switch core dump to a specified file (agTftpTSDumpFileName) on the TFTP server. other(1) is returned always when read. |
| STR agTftpLastActionStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.7 | DisplayString | read-only | The recorded status of the previous TFTP activity. |
| STR agTftpUserName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.9 | DisplayString | read-write | The username for FTP server or blank for TFTP server. |
| STR agTftpPassword | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.10 | DisplayString | read-write | The password for FTP server. |
| STR agTftpTSDumpFileName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.7.11 | DisplayString | read-write | The file name for TS dump. |
| agApply | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8 | |||
| INT agApplyPending | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.1 | INTEGER | read-only | This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above. |
| INT agApplyConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.2 | INTEGER | read-write | When this object is read the current state is returned. idle(3) indicates that there is no apply in progess. complete(5) indicates that the last apply operation is completed. Setting the value to apply(1), will write all the changes made since the last apply to the current configuration block. If the apply is successful this variable will return the state 'complete' else it will return 'failed'. In case of failure, to read the reason for failure use the agApplyTable. |
| I32 agApplyTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.4 | Integer32 | read-only | The number of strings in the apply table. |
| agApplyTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5 | not-accessible | The table of URL path for URL load balancing in the current_config. | |
| agApplyTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1 | not-accessible | Information about an URL path for URL load balancing. | |
| I32 agApplyIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.1 | Integer32 | read-only | The table index. |
| OCT agApplyString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.8.5.1.2 | OCTET STRING | read-only | A string in the apply table. |
| agTacacsConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10 | |||
| IP tacCurCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.1 | IpAddress | read-only | The IP address of the Primary TACACS+ server. |
| IP tacNewCfgPrimaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.2 | IpAddress | read-write | The IP address of the Primary TACACS+ server. |
| IP tacCurCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.3 | IpAddress | read-only | The IP address of the Secondary TACSACS server. |
| IP tacNewCfgSecondaryIpAddr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.4 | IpAddress | read-write | The IP address of the Secondary TACACS+ server. |
| INT tacCurCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.5 | INTEGER | read-only | Specify the TACACS+ port number. |
| INT tacNewCfgPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.6 | INTEGER | read-write | Specify the TACACS+ port number. |
| INT tacCurCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.7 | INTEGER | read-only | The maximum number of seconds before resending authentication to TACACS+ server. |
| INT tacNewCfgTimeout | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.8 | INTEGER | read-write | The maximum number of seconds before resending authentication to TACACS+ server. |
| INT tacCurCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.9 | INTEGER | read-only | Number of retries to the TACACS+ server. |
| INT tacNewCfgRetries | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.10 | INTEGER | read-write | Number of retries to the TACACS+ server. |
| INT tacCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.11 | INTEGER | read-only | Enable or disbale TACACS+ authentication. |
| INT tacNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.12 | INTEGER | read-write | Enable or disable TACACS+ authentication. |
| STR tacCurCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.13 | DisplayString | read-only | The TACACS+ authentication string. |
| STR tacNewCfgAuthenString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.14 | DisplayString | read-write | The TACACS+ authentication string. |
| INT tacCurCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.15 | INTEGER | read-only | Enable or disbale TACACS+ backdoor for telnet. |
| INT tacNewCfgTelnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.16 | INTEGER | read-write | Enable or disable TACACS+ backdoor for telnet. |
| STR tacCurCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.17 | DisplayString | read-only | The second TACACS+ authentication string. |
| STR tacNewCfgAuthenSecondString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.18 | DisplayString | read-write | The second TACACS+ authentication string. |
| INT tacCurCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.23 | INTEGER | read-only | Enable or disbale TACACS+ secure backdoor for telnet. |
| INT tacNewCfgSecBd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.24 | INTEGER | read-write | Enable or disable TACACS+ secure backdoor for telnet. |
| INT tacCurCfgCmap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.25 | INTEGER | read-only | Enable/Disable Tacacs+ new prividlege level maping. |
| INT tacNewCfgCmap | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.26 | INTEGER | read-write | Enable/Disable Tacacs+ new prividlege level maping. |
| agTacacsUserMapCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31 | not-accessible | The table of tacacs+ user map current configuration. | |
| agTacacsUserMapCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1 | not-accessible | A row in the tacacs+ user mapping table. | |
| I32 agTacacsUserMapCurCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.1 | Integer32 | read-only | The current config remote privilege identifier. |
| INT agTacacsUserMapCurCfgMapping | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.31.1.2 | INTEGER | read-only | Current Tacacs+ user privilege mappings. |
| agTacacsUserMapNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32 | not-accessible | The table of tacacs+ user map new configuration. | |
| agTacacsUserMapNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1 | not-accessible | A row in the tacacs+ user mapping table. | |
| I32 agTacacsUserMapNewCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.1 | Integer32 | read-only | The new config remote privilege identifier. |
| INT agTacacsUserMapNewCfgMapping | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.10.32.1.2 | INTEGER | read-create | Set new Tacacs+ user privilege mappings. |
| agMgmtNetConfig | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11 | |||
| I32 agMgmtNetTableMaxSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.1 | Integer32 | read-only | The maximum number of entries in the Management Network Table. |
| agCurCfgMgmtNetTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2 | not-accessible | The table for Management Network definitions in the current configuration block. | |
| agCurCfgMgmtNetEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1 | not-accessible | A row in the management network definition table. | |
| I32 agCurCfgMgmtNetIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.1 | Integer32 | read-only | The index of the Management Network Definition table. |
| IP agCurCfgMgmtNetSubnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.2 | IpAddress | read-only | The Management Network Address in the current_configuration block. |
| IP agCurCfgMgmtNetMask | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.2.1.3 | IpAddress | read-only | The Management Network Mask in the current_configuration block. |
| agNewCfgMgmtNetTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3 | not-accessible | The table for Management Network definitions in the new configuration block. | |
| agNewCfgMgmtNetEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1 | not-accessible | A row in the management network definition table. | |
| I32 agNewCfgMgmtNetIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.1 | Integer32 | read-only | The index of the Management Network Definition table. |
| IP agNewCfgMgmtNetSubnet | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.2 | IpAddress | read-create | The Management Network Address in the new_configuration block. |
| IP agNewCfgMgmtNetMask | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.3 | IpAddress | read-create | The Management Network Mask in the new_configuration block. |
| INT agNewCfgMgmtNetDelete | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.11.3.1.4 | INTEGER | read-create | By setting the value to delete(2), the entire row is deleted. |
| agAccess | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12 | |||
| I32 agAccessUserMaxUserID | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.1 | Integer32 | read-only | The maximum number of Users ID. |
| agAccessUserCurCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2 | not-accessible | The table of Access user configuration. | |
| agAccessUserCurCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1 | not-accessible | A row in the Access user configuration table. | |
| I32 agAccessUserCurCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.1 | Integer32 | read-only | The User identifier. |
| INT agAccessUserCurCos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.2 | INTEGER | read-only | The user class of service. |
| STR agAccessUserCurCfgName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.3 | DisplayString | read-only | The user name. |
| STR agAccessUserCurCfgPswd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.4 | DisplayString | read-only | The character string representing the user passworde. |
| INT agAccessUserCurCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.2.1.5 | INTEGER | read-only | Enable or disable a user. |
| agAccessUserNewCfgTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3 | not-accessible | The table of Access user configuration. | |
| agAccessUserNewCfgTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1 | not-accessible | A row in the Access user configuration table. | |
| I32 agAccessUserNewCfgUId | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.1 | Integer32 | read-only | The User identifier. |
| INT agAccessUserNewCos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.2 | INTEGER | read-create | The user class of service. |
| STR agAccessUserNewCfgName | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.3 | DisplayString | read-create | The user name. |
| STR agAccessUserNewCfgPswd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.4 | DisplayString | read-create | The character string representing the user passworde. |
| INT agAccessUserNewCfgState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.5 | INTEGER | read-create | Enable or disable a user. |
| INT agAccessUserNewCfgDelete | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.1.12.3.1.6 | INTEGER | read-create | This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User |
| agentStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2 | |||
| pktStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1 | |||
| C32 pktStatsAllocsEx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.1 | Counter32 | read-only | Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack. |
| C32 pktStatsFrees | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.2 | Counter32 | read-only | Total number of times the packet buffers are freed(released) to the packet buffer pool by the TCP/IP protocol stack. |
| C32 pktStatsAllocFails | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.3 | Counter32 | read-only | Total number of packet allocation failures from the packet buffer pool by the TCP/IP protocol stack. |
| G32 pktStatsMediums | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.4 | Gauge32 | read-only | Total number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| G32 pktStatsJumbos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.5 | Gauge32 | read-only | Total number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| G32 pktStatsSmalls | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.6 | Gauge32 | read-only | Total number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| C32 pktStatsMediumsHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.7 | Counter32 | read-only | The highest number of packet allocations with size greater than 128 bytes and less than or equal to 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| C32 pktStatsJumbosHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.8 | Counter32 | read-only | The highest number of packet allocations with size larger than 1536 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| C32 pktStatsSmallsHiWatermark | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.1.9 | Counter32 | read-only | The highest number of packet allocations with size less than or eqaul to 128 bytes from the packet buffer pool by the TCP/IP protocol stack. |
| mpCpuStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2 | |||
| I32 mpCpuStatsUtil1Second | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.1 | Integer32 | read-only | The utilization of MP CPU over 1 second. It shows the percentage. |
| I32 mpCpuStatsUtil4Seconds | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.2 | Integer32 | read-only | The utilization of MP CPU over 4 seconds. It shows the percentage. |
| I32 mpCpuStatsUtil64Seconds | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.2.3 | Integer32 | read-only | The utilization of MP CPU over 64 seconds. It shows the percentage. |
| portStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3 | |||
| portStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1 | not-accessible | The table of port statistics. | |
| portStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1 | not-accessible | A row in the port stats table. | |
| I32 portStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.1 | Integer32 | read-only | The port index. |
| C32 portStatsPhyIfInOctets | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.2 | Counter32 | read-only | The total number of octets received on the interface, including framing characters. |
| C32 portStatsPhyIfInUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.3 | Counter32 | read-only | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| C32 portStatsPhyIfInNUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.4 | Counter32 | read-only | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| C32 portStatsPhyIfInDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.5 | Counter32 | read-only | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 portStatsPhyIfInErrors | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.6 | Counter32 | read-only | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| C32 portStatsPhyIfInUnknownProtos | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.7 | Counter32 | read-only | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| C32 portStatsPhyIfOutOctets | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.8 | Counter32 | read-only | The total number of octets transmitted out of the interface, including framing characters. |
| C32 portStatsPhyIfOutUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.9 | Counter32 | read-only | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. |
| C32 portStatsPhyIfOutNUcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.10 | Counter32 | read-only | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. |
| C32 portStatsPhyIfOutDiscards | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.11 | Counter32 | read-only | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. |
| C32 portStatsPhyIfOutErrors | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.12 | Counter32 | read-only | The number of outbound packets that could not be transmitted because of errors. |
| G32 portStatsPhyIfOutQLen | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.13 | Gauge32 | read-only | The length of the output packet queue (in packets). |
| C32 portStatsPhyIfInBroadcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.14 | Counter32 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| C32 portStatsPhyIfOutBroadcastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.15 | Counter32 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. |
| INT portStatsClear | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.16 | INTEGER | read-write | Setting this value to clear(1) clears the stats for this port. |
| C32 portStatsPhyIfInMulticastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.17 | Counter32 | read-only | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. |
| C32 portStatsPhyIfOutMulticastPkts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.1.1.18 | Counter32 | read-only | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. |
| dot1xPortStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2 | not-accessible | The table of 802.1x port statistics. | |
| dot1xPortStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1 | not-accessible | A row in the 802.1x port stats table. | |
| I32 dot1xPortStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.1 | Integer32 | read-only | The 802.1x port stats index. |
| I32 eapolFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.2 | Integer32 | read-only | |
| I32 eapolFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.3 | Integer32 | read-only | |
| I32 eapolStartFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.4 | Integer32 | read-only | |
| I32 eapolLogoffFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.5 | Integer32 | read-only | |
| I32 eapolRespIdFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.6 | Integer32 | read-only | |
| I32 eapolRespFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.7 | Integer32 | read-only | |
| I32 eapolReqIdFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.8 | Integer32 | read-only | |
| I32 eapolReqFramesTx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.9 | Integer32 | read-only | |
| I32 invalidEapolFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.10 | Integer32 | read-only | |
| I32 eapLengthErrorFramesRx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.11 | Integer32 | read-only | |
| I32 authEntersConnecting | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.12 | Integer32 | read-only | |
| I32 authEapLogoffsWhileConnecting | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.13 | Integer32 | read-only | |
| I32 authEntersAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.14 | Integer32 | read-only | |
| I32 authSuccessesWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.15 | Integer32 | read-only | |
| I32 authTimeoutsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.16 | Integer32 | read-only | |
| I32 authFailWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.17 | Integer32 | read-only | |
| I32 authReauthsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.18 | Integer32 | read-only | |
| I32 authEapStartsWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.19 | Integer32 | read-only | |
| I32 authEapLogoffWhileAuthenticating | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.20 | Integer32 | read-only | |
| I32 authReauthsWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.21 | Integer32 | read-only | |
| I32 authEapStartsWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.22 | Integer32 | read-only | |
| I32 authEapLogoffWhileAuthenticated | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.23 | Integer32 | read-only | |
| I32 backendResponses | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.24 | Integer32 | read-only | |
| I32 backendAccessChallenges | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.25 | Integer32 | read-only | |
| I32 backendOtherRequestsToSupplicant | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.26 | Integer32 | read-only | |
| I32 backendNonNakResponsesFromSupplicant | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.27 | Integer32 | read-only | |
| I32 backendAuthSuccesses | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.28 | Integer32 | read-only | |
| I32 backendAuthFails | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.29 | Integer32 | read-only | |
| I32 lastEapolFrameVersion | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.30 | Integer32 | read-only | |
| MAC lastEapolFrameSource | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.3.2.1.31 | MacAddress | read-only | |
| spStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.4 | |||
| mgmtStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.5 | |||
| ntpStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9 | |||
| I32 ntpPrimaryServerReqSent | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.1 | Integer32 | read-only | The total number of NTP requests sent to Primary NTP Server. |
| I32 ntpPrimaryServerRespRcvd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.2 | Integer32 | read-only | The total number of NTP responces received from Primary NTP Server. |
| I32 ntpPrimaryServerUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.3 | Integer32 | read-only | The total number of NTP Updates by Primary NTP Server. |
| I32 ntpSecondaryServerReqSent | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.4 | Integer32 | read-only | The total number of NTP requests sent to Secondary NTP Server. |
| I32 ntpSecondaryServerRespRcvd | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.5 | Integer32 | read-only | The total number of NTP responces received from Secondary NTP Server. |
| I32 ntpSecondaryServerUpdates | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.6 | Integer32 | read-only | The total number of NTP Updates by Secondary NTP Server. |
| INT ntpLastUpdateServer | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.7 | INTEGER | read-only | The type of ntp server updated last time. |
| STR ntpLastUpdateTime | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.8 | DisplayString | read-only | The last time updated by ntp server. |
| INT ntpClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.9 | INTEGER | read-write | Setting this value to clear(2) clears the stats for ntp. |
| STR ntpSystemCurrentTime | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.9.10 | DisplayString | read-only | The current system time. |
| aclPortStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10 | |||
| aclPortStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1 | not-accessible | The table of aclPort statistics. | |
| aclPortStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1 | not-accessible | A row in the aclPort stats table. | |
| I32 aclPortStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.1 | Integer32 | read-only | The aclPort index. |
| C32 aclPortStatsHits | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.2 | Counter32 | read-only | Total number of hits for this ACL entry on given port |
| INT aclPortClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.10.1.1.3 | INTEGER | read-write | Setting this value to clear(2) clears the stats for the ACL. |
| aclMeterPortStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11 | |||
| aclMeterPortStatsTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1 | not-accessible | The table of aclMeterPort statistics. | |
| aclMeterPortStatsTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1 | not-accessible | A row in the aclMeterPort stats table. | |
| I32 aclMeterPortStatsIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.1 | Integer32 | read-only | The aclMeterPort index. |
| C32 aclMeterPortStatsHits | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.2 | Counter32 | read-only | Total number of hits for this ACL Meter entry on given port |
| INT aclMeterPortClearStats | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.2.11.1.1.3 | INTEGER | read-write | Setting this value to clear(2) clears the stats for the ACL meter. |
| agentInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3 | |||
| hardware | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1 | |||
| STR hwPartNumber | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.1 | DisplayString | read-only | The hardware part number of the Bladetype2 Switch. |
| STR hwRevision | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.2 | DisplayString | read-only | The hardware revision. If the revision is not available, a zero length string should be returned. |
| INT hwPowerSupplyStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.3 | INTEGER | read-only | The status of the internal power supply. |
| I32 hwSensor1Temp | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.4 | Integer32 | read-only | The temperature of the rear left sensor in degrees Celsius. |
| INT hwInsertedCubeType | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.1.5 | INTEGER | read-only | The inserted cube type. |
| portInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2 | |||
| portInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1 | not-accessible | The table of port information. | |
| portInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1 | not-accessible | A row in the port information table. | |
| I32 portInfoIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.1 | Integer32 | read-only | The port index. |
| INT portInfoSpeed | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.2 | INTEGER | read-only | The current operational speed of the port. |
| INT portInfoMode | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.3 | INTEGER | read-only | The current operational mode of the port. |
| INT portInfoFlowCtrl | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.4 | INTEGER | read-only | The current operational flow control of the port. |
| INT portInfoLink | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.5 | INTEGER | read-only | The current operational link status of the port. |
| STR portInfoPhyIfDescr | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.6 | DisplayString | read-only | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface. |
| INT portInfoPhyIfType | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.7 | INTEGER | read-only | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| I32 portInfoPhyIfMtu | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.8 | Integer32 | read-only | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. |
| PHY portInfoPhyIfPhysAddress | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.9 | PhysAddress | read-only | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. |
| INT portInfoPhyIfOperStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.10 | INTEGER | read-only | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| TIK portInfoPhyIfLastChange | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.2.1.1.11 | TimeTicks | read-only | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. |
| swKeyInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.3 | |||
| agDiff | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4 | |||
| INT agDiffState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.2 | INTEGER | read-write | When this object is read the current state is returned. idle(3) indicates that there is no diff in progess. complete(5) indicates that the last diff operation is completed. Setting the value to diff(1), will start a new diff operation Diff compares the new configuration with the current configuration and shows the pending configuration changes. Setting the value to flashdiff(1), will start a new diff operation. flashdiff compares new configuration with the flash configuration. To read the configuration changes use the agDiffTable once the state of this variable returns complete. |
| I32 agDiffTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.3 | Integer32 | read-only | The number of strings in the diff table. |
| agDiffTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4 | not-accessible | The table of URL path for URL load balancing in the current_config. | |
| agDiffTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1 | not-accessible | Information about an URL path for URL load balancing. | |
| I32 agDiffIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.1 | Integer32 | read-only | The table index. |
| OCT agDiffString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.4.4.1.2 | OCTET STRING | read-only | A string in the diff table. |
| agCfgDump | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5 | |||
| INT agCfgDumpState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.2 | INTEGER | read-write | When this object is read the current state is returned. idle(2) indicates that there is no dump in progess. complete(4) indicates that the last dump operation is completed. Setting the value to dump(1), will start a new dump operation Dump will show the current configuration. To read the configuration dump use the agCfgDumpTable once the state of this variable returns complete. Once the agCfgDumpTable is read the state should be set back to 'idle' which frees the dump buffer and others can issue a dump command via SNMP. |
| I32 agCfgDumpTableSize | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.3 | Integer32 | read-only | The number of strings in the dump table. |
| agCfgDumpTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4 | not-accessible | The table of dump strings. | |
| agCfgDumpTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1 | not-accessible | An entry in the dump table. | |
| I32 agCfgDumpIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.1 | Integer32 | read-only | The table index. |
| OCT agCfgDumpString | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.5.4.1.2 | OCTET STRING | read-only | A string in the dump table. |
| mgmtInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.6 | |||
| geaportInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7 | |||
| geaportInfoTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1 | not-accessible | The table of gea port mapping. | |
| geaportInfoTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1 | not-accessible | An entry in the geaport table mapping. | |
| I32 geaportInfoLogicalIndex | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.1 | Integer32 | read-only | The logical port index. |
| INT geaportInfoPort | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.2 | INTEGER | read-only | The GEA Port (0-based). |
| INT geaportInfoUnit | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.7.1.1.3 | INTEGER | read-only | The GEA Unit. |
| ufdInfo | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8 | |||
| INT ufdInfoState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.1 | INTEGER | read-only | Uplink Failure Detection State. |
| INT ufdInfoLtMStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.2 | INTEGER | read-only | LtM Status. |
| OCT ufdInfoLtMPorts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.3 | OCTET STRING | read-only | The LtM port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtM 0 - The represented port does not belong to LtM. |
| OCT ufdInfoLtMTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.4 | OCTET STRING | read-only | The LtM trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtM 0 - The represented trunk does not belong to LtM. |
| INT ufdInfoLtDStatus | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.5 | INTEGER | read-only | LtD status. |
| OCT ufdInfoLtDPorts | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.6 | OCTET STRING | read-only | The LtD port list. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 || |____ port 6 || . . . ||_________ port 1 |__________ reserved where x : 1 - The represented port belongs to LtD 0 - The represented port does not belong to LtD. |
| INT ufdInfoLtDTrunks | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.3.8.7 | INTEGER | read-only | The LtD trunk list. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ trunk 8 || || || ||___ trunk 7 || |____ trunk 6 || . . . ||_________ trunk 1 |__________ reserved where x : 1 - The represented trunk belongs to LtD 0 - The represented trunk does not belong to LtD. |
| agentOper | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4 | |||
| agPortOperTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1 | not-accessible | The table of port operations. | |
| agPortOperTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1 | not-accessible | A row in the port operations table. | |
| I32 portOperIdx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.1 | Integer32 | read-only | The port index. |
| INT portOperState | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.2 | INTEGER | read-write | Enable/Disable port. |
| INT portOperRmon | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.1.3 | INTEGER | read-write | Enable/Disable RMON for port. |
| portOperDot1xTable | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2 | not-accessible | The table of port operations. | |
| portOperDot1xTableEntry | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1 | not-accessible | A row in the port 802.1x operation table. | |
| I32 portOperDot1xIndx | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.1 | Integer32 | read-only | The port index. |
| INT portOperDot1xReset | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.2 | INTEGER | read-write | Reinitialize 802.1x access control on port. |
| INT portOperDot1xReauth | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.1.2.1.3 | INTEGER | read-write | Initiate reauthentication on port. |
| agNTPOper | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2 | |||
| INT ntpOperSendReq | 1.3.6.1.4.1.11.2.3.7.11.33.1.2.1.4.2.1 | INTEGER | read-write | Allows the user to send requests to the NTP server. |
RFC description
Vendor MIB for BladeType2 switching platform management.
Start monitoring HP BladeSystem Type 2 embedded network switch modules with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.