All MIBs › HP-ICF-TUNNELED-NODE-MIB › hpicfTunneledNodeRowStatus
hpicfTunneledNodeRowStatus
Module: HP-ICF-TUNNELED-NODE-MIB
OID (symbolic): HP-ICF-TUNNELED-NODE-MIB::hpicfTunneledNodeRowStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.8
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-create
Description: The status of this conceptual row in hpicfTunneledNodeTable.
This object takes values of createAndGo (4), createAndWait (5), active (1) and destroy (6) as part of a SNMP request.
A value of createAndGo (4) indicates that all the required columns are configured within this request and the profile will be set to active, if the request succeeds.
A value of createAndWait (5) indicates that some of the required columns are not configured within this request and the profile be set to notReady, if the request succeeds.
A value of active (1) is used to set the profile to active state from notReady state. A request with active would succeed only if all the required columns are already configured.
A value of destroy (6) is used to delete the profile.
A conceptual row in this table can be in either of the following states: active (1) and notReady (3).
A value of active (1) indicates that all the required columns are appropriately configured and the profile can be applied on ports.
A value of notReady (3) indicates that one or more of the required columns are not configured yet and the profile cannot be applied on ports.
The following are the required columns: Controller IP (hpicfTunneledNodePrimaryAddr).
When the profile is in use on any port, the values of required columns cannot be modified.
When the profile is in use on any port, the corresponding conceptual row can not be deleted.
What is hpicfTunneledNodeRowStatus?
This RowStatus object controls the lifecycle of a tunneled-node controller profile, and the profile can only go active once its one required column, hpicfTunneledNodePrimaryAddr, is configured; rows in use on a port cannot be modified or deleted. Admins use it to create, activate, or remove a tunneled-node profile, and understanding the required-column rule explains why an incomplete row stays stuck in notReady state. For example, an admin who sets this to createAndGo(4) without first specifying hpicfTunneledNodePrimaryAddr will end up with a notReady row instead of an active one.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.128 | hpicfTunneledNode | HP-ICF-OID |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.5.1.128.1 | hpicfTunneledNodeObjects | HP-ICF-TUNNELED-NODE-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.128.1.1 | hpicfTunneledNodeConfig | HP-ICF-TUNNELED-NODE-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1 | hpicfTunneledNodeTable | HP-ICF-TUNNELED-NODE-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1 | hpicfTunneledNodeEntry | HP-ICF-TUNNELED-NODE-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.128.1.1.1.1.8 | hpicfTunneledNodeRowStatus | HP-ICF-TUNNELED-NODE-MIB |