HP-ICF-RELOAD-MIB

All MIBs › HP-ICF-RELOAD-MIB

Organization: HP Networking

Last Updated: 2009-12-03

Category: Device Management, Vendor: HP/HPE

Description: HP ICF SNMP MIB for scheduled device reload management allowing timed or delayed reboot of HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-RELOAD-MIB?

HP-ICF-RELOAD-MIB is part of HP's Integrated Communication Facility (ICF) enterprise MIB family for HP ProCurve managed switches, covering scheduled or delayed device reload (reboot) management. It exposes a small set of configuration objects that let a management station schedule, query, or cancel a future reload of the switch. Its monitoring value is a software/change-management one: polling this MIB reveals whether a reload has been scheduled and for what date/time, letting operators confirm a maintenance-window reboot is correctly queued or detect an unplanned reload that could cause unexpected downtime. It belongs to the broader HP ICF enterprise MIB family shared with other hpicf-prefixed modules on the same switch platforms. It is typically deployed on HP ProCurve switches in enterprise wiring closets where administrators schedule off-hours reboots for firmware upgrades. Network engineers evaluating or troubleshooting this functionality can download the HP-ICF-RELOAD-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-RELOAD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP ProCurve managed switches

Monitoring Examples

hpicfReloadTable/hpicfReloadEntry expose hpicfReloadControl, used to start or cancel a scheduled reload, and hpicfReloadDateTime, the scheduled reload time. An administrator would poll hpicfReloadDateTime before a maintenance window to confirm the reboot is scheduled for the intended time. Finding hpicfReloadControl in an active/pending state outside of a planned window would reveal an unauthorized or mistakenly scheduled reboot.

What Can Be Monitored

scheduled reload date/time
reload control state (start/cancel/pending)

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From HP-ICF-BASIC

hpicfBasic

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfReloadMIB	1.3.6.1.4.1.11.2.14.11.1.4.20			This MIB module describes objects for basic management of reloading devices in the HP Integrated Communication Facility product line.
hpicfReloadObjects	1.3.6.1.4.1.11.2.14.11.1.4.20.1
INT hpicfReloadState	1.3.6.1.4.1.11.2.14.11.1.4.20.1.1	INTEGER	read-write	This object specifies the state of the device. If it is in: (1) 'no reload' was scheduled (2) 'reload after' was scheduled (3) 'reload at' was scheduled To cancel the scheduled reload, this object needs to be set with (1). NOTE: This object cannot be set with (2) or (3).When hpicfReloadAfter or hpicfReloadAt is scheduled the state of hpicfReloadState is automatically changed to (2) or (3) respectively.
I32 hpicfReloadAfter	1.3.6.1.4.1.11.2.14.11.1.4.20.1.2	Integer32	read-write	The object specifies the time in seconds after which reload will occur.If no reload is scheduled it returns -1. To schedule a reload/reboot, time in seconds is entered and 0 for immediate reload. When hpicfReloadAfter is scheduled the state of hpicfReloadState is changed to reloadAfter automatically. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAfter is scheduled.
DAT hpicfReloadAt	1.3.6.1.4.1.11.2.14.11.1.4.20.1.3	DateAndTime	read-write	The object specifies the time and date at which reload will occur. To schedule a reload in the future, the time and date at which reload needs to occur should be given. When hpicfReloadAt is scheduled it will change the state of hpicfReloadState to reloadAt. NOTE: If hpicfReloadAt or hpicfReloadAfter is already scheduled, it will automatically be cancelled and the new hpicfReloadAt is scheduled.
hpicfEntityReload	1.3.6.1.4.1.11.2.14.11.1.4.20.2
hpicfReloadTable	1.3.6.1.4.1.11.2.14.11.1.4.20.2.2		not-accessible	This table contains a row for different entities and shows the control operation and the latest reload time for that entity.
hpicfReloadEntry	1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1		not-accessible	Information about Reload table.
REL hpicfReloadControl	1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.1	ReloadControl	read-write	This specifies the control action for this entity
DAT hpicfReloadDateTime	1.3.6.1.4.1.11.2.14.11.1.4.20.2.2.1.2	DateAndTime	read-only	The object specifies the time and date at which the last reload will occured
hpicfReloadConformance	1.3.6.1.4.1.11.2.14.11.1.4.20.3
hpicfReloadGroups	1.3.6.1.4.1.11.2.14.11.1.4.20.3.1
hpicfReloadGroup	1.3.6.1.4.1.11.2.14.11.1.4.20.3.1.1			A collection of objects for reload command.
hpicfReloadCompliances	1.3.6.1.4.1.11.2.14.11.1.4.20.3.2
hpicfReloadFullCompliance1	1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.1			The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects and notifications. Such an implementation can be both monitored and configured via SNMP. It can also send notifications about change in the operational status of the Reload application.
hpicfReloadFullCompliance2	1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.2			The compliance statement for SNMP entities which implement the RELOAD-MIB with support for writable objects. Such an implementation can be both monitored and configured via SNMP.
hpicfReloadReadOnlyCompliance1	1.3.6.1.4.1.11.2.14.11.1.4.20.3.2.3			The compliance statement for SNMP entities which implement the hpicfReload MIB without support for read-write (i.e. in read-only mode). It can also send notifications about change in the operational status of the syslog application.

RFC description

Manages device reload scheduling and control operations for HP Integrated Communication Facility devices. Provides mechanisms for immediate or delayed power cycling and state monitoring.

Start monitoring HP ProCurve managed switch (scheduled device reload) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-RELOAD-MIB

What Is HP-ICF-RELOAD-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description