HPN-ICF-QINQ-MIB

All MIBs › HPN-ICF-QINQ-MIB

Last Updated: 2006-03-10

Category: Technology: VLAN, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages QinQ (802.1ad) double-tagging VLAN configuration and S-tag mapping on HP/Comware switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-QINQ-MIB?

HPN-ICF-QINQ-MIB is an HP/Comware ICF MIB for managing QinQ (IEEE 802.1ad-style) double VLAN tagging, where an outer service-provider tag (S-tag) is added around a customer's inner VLAN tag to allow VLAN-transparent transport across a provider network. It exposes configuration data describing which interfaces have QinQ enabled and how inner customer VLANs map to outer service VLANs. Its monitoring role is configuration-state verification: administrators confirm that QinQ tagging is enabled/mapped correctly on the expected trunk interfaces, catching misconfigurations that would cause customer VLAN traffic to be dropped or delivered untagged across the provider core. It extends the IEEE 802.1Q/802.1ad tagging standard referenced in its description with HP/Comware-specific management objects. It is deployed on HP/H3C Comware switches acting as provider-edge devices in metro Ethernet or multi-tenant VLAN transport networks. Engineers can download the HPN-ICF-QINQ-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-QINQ-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware provider-edge switch

Monitoring Examples

No specific object or table names were provided in the source excerpt (module description and sample objects were both empty), so a concrete polling walkthrough cannot be grounded in real identifiers here. In general use, an administrator would check per-interface QinQ enable state and the inner-to-outer VLAN mapping to confirm customer traffic is being correctly double-tagged across a trunk, rather than dropped or leaked untagged.

What Can Be Monitored

per-interface QinQ enable state
inner-to-outer VLAN tag mapping
S-tag configuration

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfQINQ	1.3.6.1.4.1.11.2.14.11.15.2.69			802.1Q-in-Q MIB
hpnicfQinQMibObject	1.3.6.1.4.1.11.2.14.11.15.2.69.1
hpnicfQinQGlobalConfigGroup	1.3.6.1.4.1.11.2.14.11.15.2.69.1.1
HPN hpnicfQinQBpduTunnelSwitch	1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.1	HpnicfQinQSwitchState	read-write	The global configuration switch of BPDU 802.1q tunnel. If global configuration is disabled, BPDU tunnel function will be disabled despite of the corresponding configuration of interface. BPDU tunnel function of a certain interface would work only if the global and interface's switch are both enabled.
I32 hpnicfQinQEthernetTypeValue	1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.2	Integer32	read-write	Ethernet protocol type configuring for a global value. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface or VLAN. The node that configure this value for a single interface is hpnicfQinQIfEthernetType, whose priority is higher than hpnicfQinQEthernetTypeValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration. The ethernet protocol type of node hpnicfQinQVidEthernetType that configured for a VLAN has the highest priority.
I32 hpnicfQinQServiceTPIDValue	1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.3	Integer32	read-write	Ethernet protocol type configured for service VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfServiceTPIDValue, whose priority is higher than hpnicfQinQServiceTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration.
I32 hpnicfQinQCustomerTPIDValue	1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.4	Integer32	read-write	Ethernet protocol type configured for customer VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfCustomerTPIDValue, whose priority is higher than hpnicfQinQCustomerTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration.
hpnicfQinQBpduTunnelTable	1.3.6.1.4.1.11.2.14.11.15.2.69.1.2		not-accessible	A table for configuring 802.1q BPDU tunnel function for interfaces.
hpnicfQinQBpduTunnelEntry	1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1		not-accessible	An entry for configuring 802.1q BPDU tunnel function for interfaces.
INT hpnicfQinQProtocolIndex	1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.1	INTEGER	not-accessible	The index of protocol on which the BPDU tunnel state will be set. 'bpdu' represents status of BPDU tunnel. 'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGMP tunnel will start to work only if BPDU tunnel and STP/GMOSAIC/IGMP tunnel are both enabled.
ROW hpnicfQinQBpduRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.2	RowStatus	read-create	Operation status of this table entry.
hpnicfQinQPriorityRemarkTable	1.3.6.1.4.1.11.2.14.11.15.2.69.1.3		not-accessible	A table for configuring priority field in 802.1Q-in-Q outer VLAN tag for interfaces. This feature uses the priority of an inner VLAN tag to remark the priority of an outer VLAN tag.
hpnicfQinQPriorityRemarkEntry	1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1		not-accessible	An entry for configuring priority remark function for interfaces.
I32 hpnicfQinQPriorityValue	1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.1	Integer32	not-accessible	The priority value in inner VLAN tag. Since the priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value.
I32 hpnicfQinQPriorityRemarkValue	1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.2	Integer32	read-create	The new priority value used to fill outer tag.
ROW hpnicfQinQPriorityRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.3	RowStatus	read-create	Operation status of this table entry.
hpnicfQinQVidTable	1.3.6.1.4.1.11.2.14.11.15.2.69.1.4		not-accessible	A table for configuring VLAN ID of the 802.1Q-in-Q interfaces.
hpnicfQinQVidEntry	1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1		not-accessible	An entry for configuring VLAN ID of the 802.1Q-in-Q interfaces.
I32 hpnicfQinQVlanID	1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.1	Integer32	not-accessible	VLAN ID
OCT hpnicfQinQInboundVidListLow	1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.2	OCTET STRING	read-create	The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
OCT hpnicfQinQInboundVidListHigh	1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.3	OCTET STRING	read-create	The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
I32 hpnicfQinQVidEthernetType	1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.4	Integer32	read-create	Ethernet protocol type configuring for a VLAN.
ROW hpnicfQinQVidRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.5	RowStatus	read-create	Operation status of this table entry.
hpnicfQinQVidSwapTable	1.3.6.1.4.1.11.2.14.11.15.2.69.1.5		not-accessible	A table for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces.
hpnicfQinQVidSwapEntry	1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1		not-accessible	An entry for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces.
I32 hpnicfQinQVidSwapOld	1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.1	Integer32	not-accessible	The old VLAN ID of original 802.1Q packets.
I32 hpnicfQinQVidSwapNew	1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.2	Integer32	read-create	The new VLAN ID of original 802.1Q packets.
ROW hpnicfQinQVidSwapRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.3	RowStatus	read-create	Operation status of this table entry.
hpnicfQinQPrioritySwapTable	1.3.6.1.4.1.11.2.14.11.15.2.69.1.6		not-accessible	A table for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. Using this function, the priority of inner VLAN tag can be modified.
hpnicfQinQPrioritySwapEntry	1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1		not-accessible	An entry for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces.
I32 hpnicfQinQPrioritySwapOld	1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.1	Integer32	not-accessible	The old priority of original 802.1Q packets. It is the priority of inner VLAN tag. Since the VLAN priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value.
I32 hpnicfQinQPrioritySwapNew	1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.2	Integer32	read-create	The new priority of original 802.1Q packets. It is the priority of inner VLAN tag after swapped.
ROW hpnicfQinQPrioritySwapRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.3	RowStatus	read-create	Operation status of this table entry.
hpnicfQinQIfConfigTable	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7		not-accessible	A table for configuring 802.1Q-in-Q functions for interfaces.
hpnicfQinQIfConfigEntry	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1		not-accessible	An entry for configuring 802.1Q-in-Q functions for interfaces.
I32 hpnicfQinQIfEthernetType	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.1	Integer32	read-create	Ethernet protocol type configuring for an interface.
HPN hpnicfQinQIfSwitch	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.2	HpnicfQinQSwitchState	read-create	Switch of 802.1Q-in-Q functions configuring for an interface.
ROW hpnicfQinQIfRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.3	RowStatus	read-create	Operation status of this table entry.
I32 hpnicfQinQIfServiceTPIDValue	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.4	Integer32	read-create	Service TPID value configured for an interface.
I32 hpnicfQinQIfCustomerTPIDValue	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.5	Integer32	read-create	Customer TPID value configured for an interface.
HPN hpnicfQinQIfUplinkSwitch	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.6	HpnicfQinQSwitchState	read-create	Switch of the uplink 802.1Q-in-Q function for an interface.
HPN hpnicfQinQIfDownlinkSwitch	1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.7	HpnicfQinQSwitchState	read-create	Switch of the downlink 802.1Q-in-Q function for an interface.

RFC description

Manages 802.1Q-in-Q VLAN stacking and BPDU tunnel configuration on HP switches.

Start monitoring HP/H3C Comware provider-edge switch (802.1ad QinQ double VLAN tagging) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-QINQ-MIB

What Is HPN-ICF-QINQ-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description